230/60 for sale, brand-new and used.

TB Woods XFC2002-0C E-Trac 2 HP AC Inverter Drive XFC20020C XFC2002 0C Wood's Manufacturer: TB WoodsModel: XFC2002-0CType: E-Trac AC Inverter DriveRating: 2 HpInput Voltage: 208-230 VAC 3 Phase, 50/60 Hz.Output Voltage: 3.5-230 V, 7.5 Amps Used, In working condition.This item is used. Condition: Used, if you are not satisfied with this picture please email us with the item number and we will reply with more pictures.

TB Woods WFC2001-0C E-Trac 1 HP AC Inverter Drive WFC20010C WFC2001- C Wood's Manufacturer: TB WoodsModel: WFC2001-0CType: E-Trac AC Inverter DriveRating: 1 Hp, .75 kWInput Voltage: 230 VAC 3 Phase, 50/60 Hz.Output Voltage: 230 V, 4 Amps Used, In working condition.This item is used. Condition: Used, if you are not satisfied with this picture please email us with the item number and we will reply with more pictures.

Square D motor control center. Square D serial number 12980110080. With Altivar 58 VFD.

Magnetek3P-VS1 Motor ControlPart# 4-178164-01Volts: 208-230/380-460 - 60 HzAmps: 15 Maximum Serial # LAN 2191

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP This product is new without packaging or documentation, the documentation is available from the manufacturers web site. This unit was purchased for a for a project that was never started, it has been powered on, tested and reset to factory defaults. Specs are from manufacturers web site: Main

Minarik Motor Master 20000 Series MM234C1A ARM=0-90 (0-180)VDC, 10 A max Input: 115 (230) VAC, 1 PH, 50/60 Hz, 13 A max Used LOC# 4B4-35

Nordic 100 HP Solid State Reduced Voltage Induction Motor Controller 26A32V00 Used. Guaranteed to work or your money back. If there are ANY issues, please contact me before leaving feedback.

1SpecificationsMax.

This is a new old stock Dayton DC Motor Controller. This unit has been on a shelf and never installed. Use Only with Permanent Magnet or Shunt Wound DC Motors 1, 1-1/2, or 2 HP Motors 50:1 Speed Range On/Off Switch 230 volt AC Input, 60/50 Hz, 1-Phase Line and Motor Fuses Continuous Duty 0 to 180V DC Output, 15A max.

Tested and works great RATED – 3 Hp @ 230 VAC – 50/60 Hz SPECIFICATIONSAC Line Input (VAC ± 15%, 50/60 Hz).............................. 230Horsepower at 230 VAC Line (Hp) [KW] .................... 3hp [2.25kw]Armature Voltage Range at 230 VAC Line (VDC) ..

RSE1112-BS Carlo Gavazzi Motor Controller, Single Phase, 3 phase torque reduction Operational voltage: 230 VACrms 50/60 Hz Control Voltage: 24-110 VAC/DC & 110-480 VAC Operational Current: 12A NO INTERNATIONAL SHIPPING

This was acquired through a federal bankruptcy sale. It was found in the original manufacturer supplied shipping crate. It looks to be new.

*****************NEW NEVER USED BUT DO NOT HAVE ORIGINAL BOX**************** PERFECT CONDITION JUST NO ORIGINAL BOX NOTE: Heat sink is required on this model for the following applications 3/4 and 1 HP 90 Volts All 1.5 and 2 HP Catalog Number: 174307.00 Description: DC SCR CONTROL - NEMA1 ENCLOSED Input Voltage: 115/230VAC Output Voltage: 90/180VDC Output Current: 10 Amps HP Range: 90V (1/8-1) / 180V (1/4-2) Direction: NON Reversing Enclosure: NEMA 1 Ship Weight: 6 lbs.

Product Description Magnetic Motor Starter, Non Reversing, NEMA Size 1, NEMA Type 1, Number Of Poles 2, Power Rating @ 120 VAC Single Phase 2 HP, Power Rating @ 230 VAC Single Phase 3 HP, Length 10 Inches, Height 5.56 Inches, Width 6 Inches, 240 VAC Coil, One Thermal Unit Required Sold Separately NEMA Magnetic Motor Starters with Standard Overload RelaysFull-voltage s

Inspected and tested Allen Bradley Reversing Motor Starter Type 505-AOD NEMA Size: 0 Coils: 120 Volts 60 Hz. Aux contactors: 2 NO, 2 NC Maximum Rating; 200 - 230 Volts 3 HP 460 - 575 Volts 5HP This item was removed from new enclosure and has never ben connected to a power course.