+ Post new Ad
24-set Round & Oblong tooling kit for Geka Hydracrop 50, 70, H13 & other, US $1,025.00 – Picture 0
24-set Round & Oblong tooling kit for Geka Hydracrop 50, 70, H13 & other, US $1,025.00 – Picture 0

24-set Round & Oblong Tooling Kit For Geka Hydracrop 50, 70, H13 & Other

US $1,025.00

  • Buffalo, New York, United States
  • Jan 30th
Open on mobile:
QR code
Geka Hydracrop 50, 70 & other Geka   IRONWORKER 24-set TOOLING KIT 16 sets of new standard round punch & die sets for Geka Ironworkers. 8 sets of new standard size oblong punch & die sets.  Kits are made by Cleveland Punch & Die, Ravenna, Ohio.  Fig # 16 punches (equil to #219 - CST, #119 - American Punch, DH - Piranha/Whitney) Fig # 59 dies ( equil to #417 - CST, #318 - American Punch, JC-Piranha). Standard Set includes:   or choose 16 standard sets of tools you need with your die clearances:  Punch sizes:  3/16", 1/4",5/16",  3/8", 13/32", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16". Die sizes:    7/32", 9/32", 11/32", 13/32", 7/16", 15/32", 9/16",  5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8" Oblong Sizes: ( 8 sets of standard sizes) : Punch:  1/4" x 1", 5/16" x 1", 7/16" x 3/4", 7/16" x 1", 9/16" x 3/4", 9/16" x 1", 11/16" x 1", 13/16" x 1" Die:  9/32" x 1-1/32", 11/32" x 1-1/32", 15/32" x 25/32", 15/32" x 1-1/32", 5/8" x 13/16", 5/8" x 1-1/16", 3/4" x 1-1/16", 7/8" x 1-1/16"  ****Includes small can of Punch Easy lubrication & heavy-duty  plastic case for tooling.**** Some of the Ironworkers:  Geka :  Hydracrop 50-A/S/SD, Hydracrop 70-A/S/SD, Microcrop, Minicrop, Maxicrop, Puma 11, Puma 13, Puma 50H, Puma 70H, 11H, 13H, CEP11, CEP13 Contact us with any questions or to confirm your model number and tooling style. Ships UPS -ground    May take 4-5 days to machine keyways on the punches and notches on dies for your model.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Cleveland
Country of Manufacture United States
Model Geka

Directions

Similar products from Punch Tool Sets & Dies

TOVAY 8" Drive Pin Punches Tools No. 3015 *Set of 5* In Original Case

TOVAY 8" Drive Pin Punches Tools No. 3015 *Set of 5* In Original Case

  • Lincoln, California, United States
  • Jan 30th
Vintage Machine Cut Steel Figures 1/4 in. #'s Sears Roebuck & Co

Vintage Machine Cut Steel Figures 1/4 in. #'s Sears Roebuck & Co

  • Danville, Indiana, United States
  • Jan 30th
GTD GREENFIELD- 5/8"NF - 1/4"NC & 9/16" NF&NC DIES

GTD GREENFIELD- 5/8"NF - 1/4"NC & 9/16" NF&NC DIES

  • Princeton, Minnesota, United States
  • Jan 30th
1914 Vintage Machining handbook on CD machinist Tool Milling lathe

1914 Vintage Machining handbook on CD machinist Tool Milling lathe

  • Seattle, Washington, United States
  • Jan 30th
C.H. HANSON 3/8" Steel Letter 20350 & Number 20601 Hand Stamps Set

C.H. HANSON 3/8" Steel Letter 20350 & Number 20601 Hand Stamps Set

  • Englewood, Florida, United States
  • Jan 30th
Hexagon Die, Carbon Steel, RH, M12-1.75mm

Hexagon Die, Carbon Steel, RH, M12-1.75mm

  • Saint Peters, Missouri, United States
  • Jan 30th
Ridgid 48965 1-1/4-inch 500B Left-Handed High Speed Bolt Dies

Ridgid 48965 1-1/4-inch 500B Left-Handed High Speed Bolt Dies

  • Cleveland, Ohio, United States
  • Jan 30th
Ridgid 48970 1-3/8-inch 500B Left-Handed High Speed Bolt Dies

Ridgid 48970 1-3/8-inch 500B Left-Handed High Speed Bolt Dies

  • Cleveland, Ohio, United States
  • Jan 30th
Snap On TR 25-1 internal Universal rethreading tool

Snap On TR 25-1 internal Universal rethreading tool

  • North Troy, Vermont, United States
  • Jan 30th
Triumph Hand Riveter Set No. 44591A

Triumph Hand Riveter Set No. 44591A

  • United States
  • Jan 30th
Hi Quality Tools & Parts Brand New Steel 8" Long Drive Pin Punch 1/8 Inches

Hi Quality Tools & Parts Brand New Steel 8" Long Drive Pin Punch 1/8 Inches

  • New Delhi, India
  • Jan 30th
NEW PITTSBURGH TRANSFER PUNCH SET 26 PUNCHES

NEW PITTSBURGH TRANSFER PUNCH SET 26 PUNCHES

  • Lakewood, Washington, United States
  • Jan 30th
Hi Quality New Long Drive Pin Punches : Tip DIA 3/8" Over All Length 200MM

Hi Quality New Long Drive Pin Punches : Tip DIA 3/8" Over All Length 200MM

  • New Delhi, India
  • Jan 30th
Brand New HQ Made In India Parallel New Pin Punch 1/4" - 161d : Length 100MM

Brand New HQ Made In India Parallel New Pin Punch 1/4" - 161d : Length 100MM

  • New Delhi, India
  • Jan 30th
Dayton VNX87 112 D2 P.3830 Die

Dayton VNX87 112 D2 P.3830 Die

  • Hendersonville, Tennessee, United States
  • Jan 30th
Stippit punch sheet metal fabrication

Stippit punch sheet metal fabrication

  • Suffolk, Virginia, United States
  • Jan 30th
MACHINIST'S GREENFIELD TOOL & DIE OK #753 1-1/2" THREAD DIE HOLDER

MACHINIST'S GREENFIELD TOOL & DIE OK #753 1-1/2" THREAD DIE HOLDER

  • Golden Valley, Arizona, United States
  • Jan 30th
E-Z PUNCH PAK MACHINIST Punch Set 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 & 3/4), USA

E-Z PUNCH PAK MACHINIST Punch Set 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 & 3/4), USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
VINTAGE WHITNEY – JENSEN NO 5 JR HAND PUNCH SET

VINTAGE WHITNEY – JENSEN NO 5 JR HAND PUNCH SET

  • Flat Rock, Michigan, United States
  • Jan 30th
Lot of 3 Metal Standard Duty Numbers 0-8 Punch Stamp Sets 1/4" 1/8" 1/16"

Lot of 3 Metal Standard Duty Numbers 0-8 Punch Stamp Sets 1/4" 1/8" 1/16"

  • Ontario, California, United States
  • Jan 30th

People who viewed this item also vieved

18x TPG 332 Grade C6 Carbide Insert

18x TPG 332 Grade C6 Carbide Insert

  • West Babylon, New York, United States
  • Mar 9th
10x TPG 332 HA Carbide Insert

10x TPG 332 HA Carbide Insert

  • West Babylon, New York, United States
  • Mar 9th
HQ VALVE SEAT & FACE CUTTER SET - 15 PCS SET FOR VINTAGE CARS & BIKES, JEEP

HQ VALVE SEAT & FACE CUTTER SET - 15 PCS SET FOR VINTAGE CARS & BIKES, JEEP

  • DELHI, DELHI, India
  • Mar 9th
VALVE SEAT & FACE CUTTER SET - 10 PCS CUTTER SET FOR VINTAGE CAR & BIKES

VALVE SEAT & FACE CUTTER SET - 10 PCS CUTTER SET FOR VINTAGE CAR & BIKES

  • DELHI, DELHI, India
  • Mar 9th
Lot Of 4 End Mills 2 Helex 1 Illinois Eclipse 1 Bendix New Old Stock

Lot Of 4 End Mills 2 Helex 1 Illinois Eclipse 1 Bendix New Old Stock

  • Pittsburgh, Pennsylvania, United States
  • Mar 11th
.047" Radius .047" Pilot 2 Flute DE Corner Rounding Carbide End Mill TiCN USA

.047" Radius .047" Pilot 2 Flute DE Corner Rounding Carbide End Mill TiCN USA

  • Seminole, Florida, United States
  • Mar 11th
One lot of 15 Reamers "BRAND NEW" All HSS Titan & Yankee All USA Made.

One lot of 15 Reamers "BRAND NEW" All HSS Titan & Yankee All USA Made.

  • Milan, Michigan, United States
  • Mar 29th
5/8 DIA HSS #2 TAPER SHANK CAR REAMER-NATIONAL-(A-1-5-3-18)

5/8 DIA HSS #2 TAPER SHANK CAR REAMER-NATIONAL-(A-1-5-3-18)

  • Mitchell, Indiana, United States
  • Mar 29th
Sumitomo TNPL 331 - M T1200A Ceramic Inserts **8 Inserts**

Sumitomo TNPL 331 - M T1200A Ceramic Inserts **8 Inserts**

  • Houston, Texas, United States
  • May 28th
SsangYong Ceramic Inserts DNGA 432 E040

SsangYong Ceramic Inserts DNGA 432 E040

  • Saint Louis, Missouri, United States
  • May 28th
Widia Blade Wr2\4502699661k0 LATHE CUTTING TOOL

Widia Blade Wr2\4502699661k0 LATHE CUTTING TOOL

  • Lincoln Park, New Jersey, United States
  • May 29th
Six New Starrett Hack Saw Blades Red Stripe RS 1414-5 High Speed

Six New Starrett Hack Saw Blades Red Stripe RS 1414-5 High Speed

  • Mohawk, New York, United States
  • May 29th
Hougen® 2" X 3" Rotabroach® "12,000-Series" PN 3-12264 Pilot bit Included

Hougen® 2" X 3" Rotabroach® "12,000-Series" PN 3-12264 Pilot bit Included

  • Nampa, Idaho, United States
  • Jun 2nd
duMONT 3/8 SQUARE BROACH

duMONT 3/8 SQUARE BROACH

  • Edison, New Jersey, United States
  • Jun 2nd
Large Lot of 9 Drill Bits for Slugger Drill Cyclone FMT Hougen Made in U.S.A.

Large Lot of 9 Drill Bits for Slugger Drill Cyclone FMT Hougen Made in U.S.A.

  • Raymond, New Hampshire, United States
  • Jun 9th
Machinist Milling Machine Ends Various Set Of 10

Machinist Milling Machine Ends Various Set Of 10

  • Springfield, Missouri, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies