2mt To 1" - 8tpi - Mt2 To 1-8 - Morse #2 - From Lathecity

US $4000

Fargo, North Dakota, United States
Oct 23rd

Open on mobile:
QR code

May be used as a spindle-adapter for a wood lathe from LatheCity Included: Morse Taper #2 (MT2) to 1"-8 TPI (about x1.2" thread length), steel, 3/8-16 drawbar, RH threads, hex collar/shoulder, taper length 1.5", approximate dimensions LatheCity tip: These are right hand threads, i.e., don't reverse RPM. The spindles are taped at the backend which can be used to fix a drawbar. It is a bolt or threaded rod which is inserted into the backend of the spindle to secure the spindle. The taper is cut on a CNC lathe with spindle runout of 0.0006". However, the spindles will have unlikely a runout better than 0.005" which should be sufficient for wood lathes. The spindles won't likely be good enough for metal work. Drawbar is not included, use a long screw or threaded rod (if required on your lathe). The length of the drawbar depends on your lathe model, they are all different, i.e., it would not make sense to include this. Safety Notes, Trouble Shooting, and Disclaimer: General safety rules for machine/power tools are in place. For an extended list of safety notes, consult the literature or go to our website. You can download free of charge a safety booklet, which is also typically included (free of charge) for first-time customers. Use protective closing including, most importantly, safety glasses. The adapter may start to rotate. Do not try to stop the rotating adapter with your hands. Do not reverse the lathe rotation direction or one may unscrew the adapter. Use the drawbar to secure the spindle. The spindle should rotate towards you (on front side of the lathe bed). The chuck should be screwed against the nut. Hold the nut with a wrench and screw the chuck against the nut. The runout (TIR) of the adapter may not be sufficient for using it on a metal lathe. If the runout on your system is too large then don't use this spindle. RPM maximum are 2800. We do not warrant that any accessories can be used for any particular application. Usage of accessories or damage caused by unprofessional use is at the risk of the customer. Neither LatheCity nor its owner shall be liable for damage arising from unprofessional use or misuse of LatheCity accessories. Neither LatheCity nor its owner shall be liable for damage arising from unprofessional use or misuse of LatheCity accessories. Any legal action brought against LatheCity/Uwe Burghaus shall be tried in the State of North Dakota in Fargo, USA. WARRANTY: we do not provide any warranty for our products. In no event shall LaheCity's liability exceed the purchase price paid for the product. We shall in no event be liable for death, injuries to persons or property or incidental, contingent, special or consequential damage arising from the use of our products. Returns in resalable conditions are accepted. All shipping costs will be covered by the customer. We do not reimburse credit card fees, taxes, import taxes, broker fees, whatnot fees/taxes if applicable at all. No restocking fees, no questions asked. No returns of custom designs or customized designs. No returns of bulk orders. We do not reimburse shipping costs for items shipped as free shipping. Note, however, that the return rate of LatheCity products is below 1%. International shipping: no insurance, no tracking, no reimbursement or replacement of lost international orders, custom fees, credit card fees, broker fees, taxes, are up to the customer. We charge up to $3 for handling on international orders. Over payed shipping will be reimbursed via PayPal. Other shipping options on request. We ship at cost internationally. Made in US. We are a manufacturer & not a retailer. Fargo, North Dakota, USA ©, 2014 LatheCity