2s 20a Bms 7.4v 8.4v 18650 Lithium Battery Charger Protection Board Cell Module

US $1.62

  • Pudong, China
  • Jul 27th
2S 20A BMS 7.4V 8.4V 18650 Lithium Battery Charger Protection Board Cell Module Protection Board Lipo Cell Module Specification: Product model: HW-391 Charging Voltage: DC 8.4-9V Version: Balance, Standard Continuous discharge current: maximum 20A (if heat dissipation environment is not good, please reduce the use of load current) Continuous charging current: maximum 10A Applicable Choice: For lithium batteries with nominal voltage of 3.7V and charge of 4.2V (including 18650, 26650 and polymer lithium batteries), can start-up current 25A, power less than 50W electric drill, or 168W resistive load Product size: 48mm*20mm*4mm/1.88*0.78*0.15'' Packing weight: 3g Warm Tips: 1. Successful start-up of the drill requires 2pcs 10-20 power batteries, 4pcs 5-10 power batteries(Recommended power battery models: for SONY VTC4, VTC4A, VTC5A, VTC6), 0 V and 8.4V connections, using copper wires of more than 2 square millimeters. 2. Connect 0V, 4.2V. 8.4V, 8.4V strictly according to the figure. When welding the wire, you can't touch any components on the board, and don't intentionally short circuit. 3. When welding batteries or charging, as long as a single battery exceeds 4.2V, * 430 "resistance will heat and discharge (discharge to 4.19V or so stops heating). If the "430" resistor is heated seriously (too hot to touch), please check whether the wrong connection is made. Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding. Our Products are made and assembled using 100% High quality material. Therefore defects rate is very low. If you have any clarification, do not hesitate to contact us. Your positive feedback help us to improve.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Output Voltage Rating (DC) 20 V
Nominal Current Rating 20 A
Inrush Current Rating 20 A
Brand Unbranded
Nominal Voltage Rating (DC) 2 V

Directions

Similar products from Voltage Converters & Meters

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies