3 4 1 2 reducer for sale, brand-new and used.

Nonmetallic 3/4" Access Pull Elbow comes w/ 1/2" Reducer for use w/ 3/4" or 1/2" PVC Conduit

BROWNING GEAR REDUCER #5131039J CAT#CBN2202SB3APISNM RATIO:6.3/1 NEW

BROWNING GEAR REDUCER #5131029J CAT#CBN2202SB3APNM RATIO:6.3:1 NEW OLD STOCK

Includes floor wand shown in picture Heater: 1500 Watts Temperature: 200 Degrees Piston Pump Output: 60 psi Solution Tank: 2.1 Gallons Recovery Tank: 2.4 Gallons See Through, Lexan Carpet/Upholstery Tool (Auto Detail Tool) Spray Tip & Vacuum Slide Reducer Vacuum Hose: Commercial Grade, 12 ft. x 1 1/4" Solution Hose: 12 ft. x 3/16" Power Cord: 15 ft.

New Heat Exchanger made out of 316L Stainless Steel Using A3 fittings. Not sure on the brand but it was hand made by someone. The outside is polished and the inside is electro polished.

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Ridgid KJ-3000. I have owned this machine for 5 years and used about 25 tim

BOSTON GEAR 125:1 GEAR REDUCER #5171002D MOD:643A125 1750:RPM NEW

Group of five (5) NEW coaxial connectors from various manufacturers in a sealed cellophane container. Listed from L to R in picture are: 1. AMPHENOL coaxial connector with reducer.

CNC Engraving Machine Accessory 5M Timing Pulley Belt Set Kit Reducer Ratio 2:1 - Timing Pulley Sizes are 30teeth with 10 mm bore and 15 teeth with 6.35mm Bore- The Pulley width is 16mm- Belt Length is 300mm with 60 teeth - Belt Width is 15mmNOTES: - The small timing pulley is also available with a 6mm or 8mm bore size... leave a note when ordering if you want a different bore size... if you don't leave a buyers note you will receive a 15 tooth with 6.35mm Bore small pulley!!!

SS Swagelok Tube Fitting, Reducer, 1/2 in. x 3/4 in. Tube OD SS-810-R-12 This fitting is used but in good shape.

You are considering a Mitsubishi Geared Motor / In-Line Speed Reducer. This item is unused surplus in its original shipping crate with paperwork. Sold AS IS.

Trans Lumi Plastisol Day Glow Florescent OL Series Ink Phthalate Free, Transparent Fluorescent Ink For light color fabric outstanding and intense color brilliance Inter-mixable with other transparent application In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) and Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP) STOCK, END-USE Cotton, 50/50 cotton/polyester blends, and some synthetics.

Trans Lumi Plastisol Day Glow Florescent OL Series Ink Phthalate Free, Transparent Fluorescent Ink For light color fabric outstanding and intense color brilliance Inter-mixable with other transparent application In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) and Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP) STOCK, END-USE Cotton, 50/50 cotton/polyester blends, and some synthetics.