3 4 flange bearing for sale, brand-new and used.

[ Dayton 1/15 Motor HP 1650 RPM 115V 310 CFM OEM Blower

[ Dayton 1/4-1 HP 30 In Blade Dia Exhaust Fan Less Drive Package

NKB Flange Bearing UCFL205-16 (1") New in its box, never been used or installed

UP TO 4 NEW THOMSON 3/4" BALL BUSHING BEARINGS SSU12 This is a Fixed Auction for up to 4 New in the Box, Thomson 3/4" Precision Super Smart Ball Bushing Bearings, No. SSU12. PLEASE NOTE -- Each Bid is for ONE Bearing Dynamic Load Capa

Maxon DC motor RE-max 24 Quick Information (Motor + Gear + Encoder)Nominal Motor Voltage: 12 VNominal Motor Power:

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized tapered roller bearing for maximum life and load disbursement Bearing Support: Precision die cast and machined to assure c

NEW (in original box) Browning VF4S-135 Four bolt flange bearing. 2-3/16 " bore. Set screw lock(2).

SHARS 5/8" Keyless drill chuck with Morse Taper 4 Integral Shank 13mm --THIS UNIT DOES NOT CLOSE DOWN TO ZERO-- -- PLEASE REVIEW CAPACITY BEFORE PURCHASE-- Product Code 202-5095A Product description Capacity: 3/32-5/8" Shank Type: Morse Taper 4 Runout: .002" Tang type Product features

SHARS 5/8" Keyless drill chuck with Morse Taper 3 Integral Shank 13mm --THIS UNIT DOES NOT CLOSE DOWN TO ZERO-- -- PLEASE REVIEW CAPACITY BEFORE PURCHASE-- 202-5094A Product description Capacity: 3/32-5/8" Shank Type: Morse Taper 3 Runout: .002" Tang type Product application Integral sha

Q150-L Line Boring Equipment PRICE: $2,595. Standard Equipment: (1) 1.50" dia x 54" long chrome plated Boring Bar: 3/4 inch shank with 3 flats to fit a magnetic drill press chuck. 1/2" square holes 5" apart fit sta

Used as a standby unit, it hasn't done any work. In perfect operating condition, fully automatic. If your after a new machine, this is to be considered.

RUBBER SPRING KIT AND BEARING FOR PAD DRIVER PLATE CLARKE PART # 50736A and 10666A FOR THE CLARKE OBS-18, OBS-18 DC ORBITAL SANDER High quality double-sealed bearing, plus set of 4 rubber springs. The springs are identical to those supplied by Clarke.

Quality products at affordable prices. Check out our

TERMS AND CONDITIONS; All products are SOLD AS IS and UNABLE TO TEST unless otherwise noted in the description. Please read complete description and look closely at photos. Please ask all questions, or request additional information prior to bidding on items.

Used ES 6-10 Sullair Air Compressor in good working condition when taken out of service. Was well maintained.

NEW NO BOX this was purchased directly from SMC, it is not surplus = ) SMC GUIDE CYLINDER. THIS WAS PURCHASED DIRECTLY FROM SMC, NOT SURPLUS; CUSTOMER CANCELLATION. BELOW YOU WILL FIND GENERAL INFORMATION ABOUT THIS CYLINDER.

 You are Buying 4 Long lasting, high speed bearings for heavy-duty applications. Part # 499502H-NR has a Snap Ring clip which acts as a flange to seat the bearing. Bore: 5/8" X OD: 1-3/8" x Width: This is the same bearing as a 99502H but this bearing has a snap ring  which acts as a flange to seat the bearing.

I have two Osborn Heavy Duty Double Flange Concentric Stud bearings - FFLR-1-1/2-4 that are for sale. These are new, in the box, surplus from a job. One of the boxes is a bit chewed up, when we weren't looking my daughter's Black Lab decide to try to eat the box.