3 4 keyed shaft for sale, brand-new and used.

A O Smith H851V1 3/4 HP SHAFT 5/8 KEYED VOLTS 460/200/230

PROTECH Condenser Motor - 1/5 hp 208-230/1/60 (1075 rpm/1 speed) 51-23055-11 Technical Data: HP: 1/5 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 3/370 (230V), 5/370 (208V) FLA at 230V (A): 1.30 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Fla

Condenser Fan Motor Item #: 1859 1/6HP Totally Enclosed Condenser Fan Motor 5.6" Diameter, Totally Enclosed Air Over (TEAO) 140°F (60°C) Ambient Design Sleeve Bearings have All Angle Thrust System Class B Insulation Extended Studs 30" Leads Hubless Lead End Drain Holes Both Ends Automatic Reset Thermal Overload Protector Continuous Duty HP: 1/6 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 230 No.

DESCRIPTION: For sale in good used condition is a Charlynn Hydraulic Motor, item weights 16 pounds in a box. SPECIFICATIONS: Part # 103-1001-007 S Series 3.6 Cube, 15 GPM, 864 RPM Max PSI: 2000 Mount: 4 Bolt Shaft: 1" Keyed Dual Rotation Ports: 1/2" NPT 14 day warranty

new pulley in our overstock. 3/4 shaft is keyed and extends 2.75 from one side and 4.00 from the other. cut down or use as drive wheel per your needs.

Title: N

Concentric/Haldex High Performance Gear Pump — 1.150 Cu. In.Originally purchased through Northern tool model number 10603.3/4 inch keyed shaft for pulley or sprocket Input and output fitting worth $60. new pump for $229

Up for Sale .... (30) Cam Locks Cabinet Drawer Box Lock ( 5/8 ) Quality Made .. New with Green Keys ..

Up for Sale .... (12) Cam Locks Cabinet Drawer Box Lock ( 5/8 ) Quality Made .. New with Green Keys ..

This is a Variable/Adjustable Pulley Congress Tool & Die Co 4" Detroit U.S.A. 5/16"- 3/4" belt sizes5/8" keyed shaft holecurrently seems stuck at widest setting but with a little effort should be just finein good condition!

This is a Quick-Grip Screw-Clamp Saw / Sprocket Arbor Adapter used to fasten a saw blade or sprocket with a 1-3/8" bore onto a 1/2" diameter shaft. Here's how it works:1) Remove the clamping nut2) Slide the adapter into position on the 1/2" shaft3) Place the saw blade or sprocket (up to 1/4" thick) with a 1-3/8" bore onto the adapter4) Replace the clamping nut and tighten to secure onto the shaft This only takes a minute and you are ready to go! The nut is 1-5/8" across the flats and abou

Product Specifications Part Number SF 2 11/16 Bore Diameter 2-11/16 inches

MFG: UNKnown Category: Misc Part/Model # ARBOR/SHAFT 30"X2.439" Description: SAW SHAFT, LEFT HAND THREADS 2" OD X 2" L 4 THREADS PER INCH, 2 BLADE CLAMP DISCS 6-1/4" OD 1 FIXED ON SHAFT 1 REMOVABLE, KEYED END OF SHAFT 3-5/8" L X 1.935" OD 1/2" KEYWAY X 3-5/8"L., SHAFT WEIGHS 47 LBS. SPOTTED LIGHT RUST. PLEASE REFER TO PHOTOS.

Spinning L Shaped outside door and rear deck locking latch. Handle spins 360 degrees when locked to help prevent break in. Fits right and left hand doors.

2130N003.30 New Penn Universal Cam Cylinder Locks, Manufactured in USA for Flextronics America, LLC; Penn Part Number A2245-0000-00, Flextronics Part Number 497-0427478. Each bid quantity is for a Lot of Two (2) Locks, Two (2) Mounting Nuts, and (4) Matching Brass Keys (Key Number N003). You may bid / buy any number of lots, up to the total quantity available above.

You are bidding on a new PROTECH 51-42179-01 Condenser Motor 1/3 HP 208-230/1/60 1075 rpm/1 speed Description These motors are OEM replacements for Rheem and WeatherKing or Sure Comfortmodels; additionally they may be suitable for aftermarket retrofit in many other applications. Specifications

Honeywell Item Number: GSAA22A1B DESCRIPTION / SPECS: Item -- Safety Interlock Switch Style -- Side Rotary with Fixed Lever Series -- GSA Actuator Length -- 1.5" AC Contact Rating -- 100mA to 10A @ 600V DC Contact Rating -- 100mA