GREENFIELD REAMER FOR 1 1/4 " NPT PIPE TAP. I ALWAYS USED A PIPE NPT REAMER ON THE LARGER PIPE TAP SIZES. 2 REASONS HELP REDUCE THE TOOL PRESSURE REQUIRED AND PRODUCES A BETTER QUALITY THREAD.
5 Pcs/Set 3/4" Indexable Carbide Insert Turning Tool Bits, #2380-5123 Canada Quality Machine Shop Welcome to Canada Quality Machine Shop. We supply high quality Cutting tools, measuring tool, machine tool accessories, etc. at very good price from Toronto, Canada.
This is a set of six (6) stainless steel reamer bits. The reamer tears through the metal to bore a hole larger than what it is vs. drilling a new hole with a bit.
This is a set of (13) high strength steel tapping bits. These were used to tap threads in steel components. Listed in order of largest to smallest (diameter) and will include all nomenclature on each one: 1-'Regal Beloit 3-1/4-12 NS HS' - 3 1/4" dia x 5 3/4" length with 1 9/16" drive 2-(unmarked) - 2 3/4" dia x 5 3/8" length x 1 9/16" drive 3-'C.E.
Up for auction is a miscellaneous assortment of thread taps, and lathe tooling. also included is a #3 taper dead center for a lathe, a #4 reamer, 3 thread dies. A total of 38 pieces.
NICE MIXED LOT OF NEW AND USED --- (9) USED WOODRUFF / T-SLOT CUTTERS - 29/64 TO 5/8 --- (1) NEW PIPE REAMER - 1/8 TO 1-1/4 --- (5) NEW BURRS - 4 CARBIDE - 1 HSS - ALL HAVE 1/4 SHANK --- (3) NEW GUEHRING DRILLS - (1) HSS 1/2" - (2) CARBIDE - 1/4 - 3/16 ---(2) NEW STUB COBALT 1/2" END MILLS --- ( 1) NEW HAND TAP - 8" OAL- 10-24 --- (6) USED MULTI-USE HAND DRIVERS WITH SET SREW HOLD --- ALL ITEM LISTED AS USED ARE IN GREAT CONDITION
Spiral Reamer - Appears to have never been used- 9/16"- Spiral 4 Flute- HSS- 7 oz ** If you purchase this item and are unsatisfied for any reason, you may return it within 14 days (in the same condition when sent) for a full refund.
Semco Reamer Start the hole with the 11/64th drill pilot it then allows you to ream to a #11 hole - Appears to lightly/ barely used - Very sharp- #11 (.1910")- 11/64" Pilot - 8" long
Ellsworth Reamer- #11 (.1910")- 11/64" Pilot - 8" long- Cobalt- New Old Stock - American made ** If you purchase this item and are unsatisfied for any reason, you may return it within 14 days (in the same condition when sent) for a full refund. To see more tools, visit our eBay store: RedDotTool
HI UP FOR SALE IS A AVIATION DRILL BLOCK WITH CHIP RELIEF CUT INTO THE BOTTOM OF THE BLOCK. USED FOR DRILLING AND MAINTAINING A 90 DEGREE HOLE. THIS ONE IS FOR A 1/4 (.250) DIAMETER DRILL OR REAMER.
HI UP FOR SALE IS A PAIR OF AVIATION DRILL BLOCK'S WITH CHIP RELIEF CUT INTO THE BOTTOM OF THE BLOCK. USED FOR DRILLING AND MAINTAINING A 90 DEGREE HOLE FOR A .1625 & .1885 DIAMETER DRILL OR REAMER. THE BLOCK'S ARE MADE FROM 6061-T6 ALUMINUM AND ARE 1 1/4 INCHS LONG AND 3/4 WIDE AND IS 3/4 INCH TALL.
HI UP FOR SALE IS A AVIATION DRILL BLOCK WITH CHIP RELIEF CUT INTO THE BOTTOM OF THE BLOCK. USED FOR DRILLING AND MAINTAINING A 90 DEGREE HOLE'S THIS BLOCK HAS 2 #21 (.159) AND 1 13/32 (.4062) FOR A DRILL OR REAMER. THE BLOCK IS MADE FROM 6061-T6 ALUMINUM AND IS 2.0 INCHS LONG AND 3/4 WIDE AND IS 3/4 INCH TALL.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
