3 4 to 3 8 reducer for sale, brand-new and used.

ACCUVAC TECHNOLOGY Zero Length Reducer CF flange Size 4 5/8 inch - 3 3/8 inch for 2.00 inch tube with eight (10)  .33 inch dia. Through bolt holes and six (6) 5/16-24 tapped holes.The manufacturer is ISO 9001-2008 registered supplier. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material.

THE eBay SHIPPING CALCULATOR IS

UP FOR SALE A SPEED REDUCER , HERE ARE THE SPECS : Speed Reducer Type C-Face Shaft Orientation Right Angle Duty Washdown Input RPM 1725 Nominal Output RPM 86 Worm Center Distance 2.00" Bore Dia. 1-7/16" Frame 56C/140TC Overhung Load 1345 lb. Nominal R

ebay template Dodge Right Angle Worm Gear Speed Reducer Item Specifics: Model: 23Q10R56

BOSTON GEAR GEARBOX WORM GEAR SPEED REDUCER CAT. NO.: 738-20-J INPUT H.P.: 5.590 USING MOBIL SHC 634 OUTPUT TORQUE: 3488 LB. INCH RATIO: 20:1 1" APPROXIMATE SHAFT IN DIAMETER 1 5/8" APPROXIAMATE SHAFT OUT DIAMETER FOR ADDITIONAL INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOS.

Sew-Eurodrive Inc with gear reducer. MTR type DFT80N48MG 1 HR, Gear, R47DT80N4BM6 1 HR. Gear Box, Ratio 23.28, Service Factor 3.1, Torque 660 lb IN, Motor 208/360Y, Continous Duty, RPM 1700 Brake Volts 200 AC, Torque 7.4 lb ft.

This 4 pc set is now being offered with our PREMIUM X-BARS. Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton (or less) presses with, front to back, gap of about 4.25 inches.

KANETEC High Rock-based (magnet) MB-MX28F New from Japan (1000) Description KANETEC Magnet High Rock-based MB-MX28F New from Japan (1000)

BOSTON RIGHT ANGLE GEAR REDUCER F721-20-B5-G SINGLE REDUCTION SHAFT ASSEMBLY CODE: G TORQUE CAPACITY (LB-IN): 754 BORE CODE: B5-56C MOTOR HP: 1 OUTPUT SHAFT DIAMETER: 1.25" MAXIMUM INPUT HORSEPOWER: 1.4 @ 1,750 RPM HP RATIO: 20:1 NEMA / IEC FRAME SIZE: 56C INPUT TYPE: C-FACE QUILLED OUTPUT TYPE: SOLID SHAFT OUTPUT DIRECTION: RIGHT INPUT SIZE: 5/8" OUTPUT SIZE: 1" CENTER DISTANCE: 2.06" MANUFACTURER REDUCER SIZE: 721 MAXIMUM OUTPUT RPM: 87.5 @ 1,750 RP

DAYTON SPEED REDUCER WORM GEAR GEARBOX MODEL NO.: 2Z934A 29:1 RATIO 5/8" BORE INPUT 1" SHAFT OUTPUT PLEASE NOTICE THAT ITEM HAS SOME SCUFFS, SCRATCHES, ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF. FOR ADDITIONAL INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOS.