3-6 volt motor for sale, brand-new and used.

G.E. motor, 3/4hp, GE, .75 hp, 1140 rpm, 48Z frame, 230/460 volts, 200-230/460vac, 3.3-3.8/1.9 amps, 3 phase, 60 hz, ODP, catalog #5K39SN152S, 5K38SN152S, 5K39SN152S, 5K39SN152, 48Z frame, HVAC mounting, .75hp, 1140rpm, 1170 rpm, 1140, 1170, 1200 rpm, 6 pole, 1140rpm, 1170rpm, 48Z frame, G.E., General Electric, .75hp, 3/4 hp, 3 ph, 1140rpm, .50HP, G.E.

Brand new Emerson electric motor that is brand new but unpackaged. Tag with full description is listed in the pictures.

3/4 HP MOTOR FROM 14" RIDGID WOOD BANDSAW This is a 3/4 HP Bandsaw Motor from 14" Ridgid Wood Bandsaw With pulley and switch 120/240 volt Non-Reversible CCW Rotation.

up for sale 3 Phase Open Dripproof Motor, HP 3/4, RPM 3450, Voltage 208-230/460 V, NEMA Frame 56C, Service Factor 1.25, Frequency 60 Hz, Efficiency 75.5, Mounting C-Face, Bearings Double Shielded Ball, Thermal Protection None, Full Load Amps 2.6-2.4/1.2 model # 1z958

YOU ARE BIDDING ON MOTOR WITH THE FOLLOWING SPECS : Motor Application Heating And Air Conditioning Motor Sub Application Direct Drive Blowers Motor Type PSC Enclosure Open Air-Over HP3/4 Nameplate RPM1075 Voltage115 Full Load Amps10.8 Hz

AVAILABLE FOR SALE HERE ARE THE SPECS : Motor Application Pumps Motor Sub Application Jet Pumps Motor Type Capacitor-Start Enclosure Open Dripproof HP 1/2 Nameplate RPM 3450 Frame 56J Rotation CCW Voltage 115/230

UP FOR SALE MOTOR , HERE ARE THE SPECS : Motor Application

WarnerSales Warner See all my listings: WarnerSales

Selling motor at below cost in order to get it off the shelf. Customer ordered but never picked up. Horse Power: 2.0 Amperes: 6.0-5.6/2.8 Frequency: 60 RPM: 3450 Voltage: 208-230/460 Motor Type: SC Frame Size: M56HC Nema Suffix: HC

Baldor electric servo motor, catalog #BSM100B-2250AAX, BSM100B-2250AA, S4P004W031G1, spec #S4P004W031G1, new spec #S4P100W031G1, rated speed 1200rpm, with resolver, with thermostats, servo motor, 230/460volts, 1200 rpm, 3 phase, 60 hz, TENV, 3ph, 230/460vac, Baldor, BSM100B-2250AA, continuous stall torque 12nm, torque cont. stall 12nm, current cont, stall 6.08 amps, rated buss voltage 300vac, rated speed 1200rpm, peak current 16 amps, Cont.

3 HP MOTOR FROM ACCURA 02020 20" WOOD CUTTING BANDSAW This motor was taken from a machine that we sold to an Amish customer. They run their machines with belt power from a stationary diesel engine and do not need the motor. So we pull the motor, give them a discount and put the motor out there for some one who DOES need a motor.

3 HP MOTOR FROM ACCURA 02330 WOOD SHAPER W' PULLEY This motor was taken from a machine that we sold to an Amish customer. They run their machines with belt power from a stationary diesel engine and do not need the motor. So we pull the motor, give them a discount and put the motor out there for some one who DOES need a motor.

Sears Craftsman Belt Drive Contractor Style Table Saw Motor. This is a 1 1/2HP motor that Sears marketed as a "3HP MAX" motor. This motor came on a 10" contractor saw but is well configured to be used as a universal replacement motor.

AVAILABLE FOR SALE MOTOR WITH THE FOLLOWING SPECS : Motor Application HVAC/R Motor Sub Application Belt Dr Fan/Blower Motor Type3-Phase HP 2 Nameplate RPM1725 Voltage 200-230/460 Enclosure Open Dripproof Mounting Cradle Hz 60

YOU ARE BIDDING ON A GENERAL PURPOSE MOTOR WITH THE FOLLOWING SPECS : Motor Type 3-Phase Enclosure Open Dripproof HP5 Nameplate RPM1740 Frame184T Voltage208-230/460 Hz60 Phase3 Full Load Amps14.5-13.1/6.6 Nu

WarnerSales Warner See all my listings: WarnerSales

POWERMATIC 1 HP DAYTON JOINTER MOTOR This is a sweet POWERMATIC 1 HP Dayton Jointer Motor 56 Frame 115/230 volt Reversible 3450 RPM with pulley

[ Dayton 5 HP 1160 RPM 208-230/460 V General Purpose Motor

[ Dayton 5 HP 1760 RPM 208-230/460 V General Purpose Motor

[ Dayton 5 HP 1750 RPM 208-230/460 V General Purpose Motor