*1978 Caterpillar 518 * * The skidder is For Sale locally Also so Buy It Now before it is to late I have people calling to come look at it!!!! * Looking for a dozer with winch * You are more than welcome to come run it as much as you want I can give you directions. * Very good condition for the age * The hr meter quit
Welcome to our company, "The Bomb Shelter", which sells everything cool from the 1800's to the present. If you're local or passing through, please visit us at 923 Bank St. Akron, Ohio 44305 (Telephone: 330-258-0088 Please call for hours!).
This pump and 115 V 2HP motor have been used on a yacht as a water maker pump. Pump and motor work very well. I am only replacing it to convert to a 12 volt water maker system so that I do not have to run the generator and burn diesel to make water on a voyage back to Australia.
Comes with a removable C shaped wrap around platform in back and a A-FRAME spool holder in front that lets you place a large spool in front of this machine and let it run. We have ran 2 steel and one hard copper 8 gauge through this machine for days at a time. Comes with extra blades and runs as good as the operator running it.
Nercon 3.25” Wide x 13' Long with 90 Degree Curve S/S Conveyor Section -3.25” Wide Plastic Belting x 156” Long -8 feet straight to 90 degree curve to 2 feet straight with drive motor -Stainless Steel Construction -Plastic Conveyor Chain Belting -Adjustable Guide Rails -(6) Stainless Steel Threaded Leveler Legs
Nercon 3.25” Wide x 11' Long with 45 Degree Curve S/S Conveyor Section -3.25” Wide Plastic Belting x 132” Long -6 feet straight to 45 degree curve to 3 feet straight with drive motor -Stainless Steel Construction -Plastic Conveyor Chain Belting -Adjustable Guide Rails -(7) Stainless Steel Threaded Leveler Legs with Locking Casters
HABERLE SEMI-AUTOMATIC CIRCULAR COLD SAW MODEL H 350/H 3 Phase, 480 Volt Unist Spray Mist and flood control coolant system This machine is designed to cut iron, steel, and nonferrous metals with H.S.S. circular cold sawblade of ? 350 mm (14”).
The Bar Maid A-200 electric glass washer is made of heavy-duty stainless steel and bronze bearings that deliver outstanding performance and reliability. The A-200 features a 115 volt, 1/3 HP motor mounted high on the machine to keep it out of water. It also comes with an exclusive Splashguard canopy to keep water from splashing on and effecting the electrical parts.
This is a Vintage Strong running 1/4 Horsepower General Electric motor from a Wood Lathe. Comes as pictured with an on/off switch mounting bracket and clips and Bolts as pictured. Has a 1/2" diameter shaft flat sided about 1 3/4" long 1/4 Horsepower 115 Volt 60 Hz 1725 RPM 5.6 amp single phase Reversible Currently wired clockwise (Right handed at shaft end).
Vintage AC electric motor made by Robbins & Myers with a plate marked "McKesson" on opposite of mfg plate. Comes with the fan fitting you see attached. That is marked Jan 22 1929.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
