Here we have a Very Nice Floating head. Looks new to me This type of floating head helps to automatically align your tap, drill, reamer etc to center if your spindle center is not perfectly aligned with the center of your hole to be machined when it plunges downward. This one is not a tension compression holder.
This is a Quick-Grip Screw-Clamp Saw / Sprocket Arbor Adapter used to fasten a saw blade or sprocket with a 1-3/8" bore onto a 1/2" diameter shaft. Here's how it works:1) Remove the clamping nut2) Slide the adapter into position on the 1/2" shaft3) Place the saw blade or sprocket (up to 1/4" thick) with a 1-3/8" bore onto the adapter4) Replace the clamping nut and tighten to secure onto the shaft This only takes a minute and you are ready to go! The nut is 1-5/8" across the flats and abou
We Have 1,000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us @ 909.919.9600! NL Condition: Great Specifications: Tool Bit Capacity: 1-9/16" Holder Dimensions: 2" x 1-3/4" x 3-3/8" T-Nut Width: 1" Comes as shown in pictures.
THIS AUCTION IS FOR A LARGE LOT OF 20 USED BRIDGEPORT/ERICKSON BTC-1 TOOLHOLDERS, COLLET'S AND CHANGING BLOCK. BTC-35 TOOLHOLDERS THESE CAME OUT OF A VOCATIONAL SCHOOL LOOKS LIKE THEY HAVEN'T BEEN USED MUCH AT ALL!! HOLDERS: (10) 75HTG C141192 (1 MISSING NUT) (3) C143105 DA COLLET HOLDER (1 MISSING NUT) (2) C142857 D08 TAPPING HOLDERS (1) C142858 F08 TAPPING HOLDER (1) C143096
QUICK CHANGE TOOL POST Mfr. Number: 250-222 Series: 200 Type: Wedge Lathe Swing: 10- 15" Bolt Hole Diameter: 5/8" Centerline to Handle Edge: 7- 5/16" Centerline to Body: 2- 3/4" Body Width: 3" Body Height: 2- 3/4" Through Coolant: No Specifications: Tool Post T-Nut May Require Machining THIS LISTING IS MISSING THE HANDLE. FREE SHIPPING!
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.