+ Post new Ad
3/8-16 Spiral point gun tap, H3 limit, - 3 Pack, US $130 – Picture 0
3/8-16 Spiral point gun tap, H3 limit, - 3 Pack, US $130 – Picture 0

3/8-16 Spiral Point Gun Tap, H3 Limit, - 3 Pack

US $130

  • Romeoville, Illinois, United States
  • Jun 13th
Open on mobile:
QR code
OSG Spiral Point Gun Tap 3/8 Diameter 16 Thread Pitch 3 Pack New in package. Comes in a three pack. Made by Greenfield. Package is slightly worn, but taps are brand new. Notes: ***Class 8.8 metric is not US grade 8. ***Please note, to properly measure a nut, washer or screw always use either the shaft diameter of the screw or the internal diameter of the washer or nut. Length is always measured from the point in which the head contacts the material. A headed screw would be measured from the underside of the head. A countersunk/flat head screw would be measured by overall length. Buyer pays return shipping. All returns are subject to inspection. Returns must be unused. No returns will be given for used product. Up to 20% restocking fee may be applicable based on return circumstances. Please contact with any questions.

Directions

Similar products from Other Threading Taps

# 6-32 STI Tap HS GH-8 435891

# 6-32 STI Tap HS GH-8 435891

  • Redwood City, California, United States
  • Jun 13th
NEW SET OF THREE 7/16-14 NC HS G H3 TAPS

NEW SET OF THREE 7/16-14 NC HS G H3 TAPS

  • Lawton, Oklahoma, United States
  • Jun 13th
NEW UNION 29/64 HSW 443 USA TAP

NEW UNION 29/64 HSW 443 USA TAP

  • Lawton, Oklahoma, United States
  • Jun 13th
KENNAMETAL 5/8-11 NC H3 3FLT NITRIDE OXIDE Plug Tap

KENNAMETAL 5/8-11 NC H3 3FLT NITRIDE OXIDE Plug Tap

  • Grayson, Georgia, United States
  • Jun 13th
1/2-13 NC Besly TiCN coated taps (Qty. 6)

1/2-13 NC Besly TiCN coated taps (Qty. 6)

  • Dewitt, Michigan, United States
  • Jun 13th
7/16-14NC Besly TiCN coated taps (Qty. 6)

7/16-14NC Besly TiCN coated taps (Qty. 6)

  • Dewitt, Michigan, United States
  • Jun 13th
7/16-20 PTD TiCN coated taps (Qty. 9)

7/16-20 PTD TiCN coated taps (Qty. 9)

  • Dewitt, Michigan, United States
  • Jun 13th
HeliCoil 1/2-13 STI 4 Flute Bottom Tap 8CBB

HeliCoil 1/2-13 STI 4 Flute Bottom Tap 8CBB

  • Tujunga, California, United States
  • Jun 13th
machinist Tap & Reamer aligner ; 06593016 MTH0390

machinist Tap & Reamer aligner ; 06593016 MTH0390

  • Rocky Mount, North Carolina, United States
  • Jun 13th
Walton 40006 #0-#6, 8" Long Style B Tap Extension

Walton 40006 #0-#6, 8" Long Style B Tap Extension

  • USA, United States
  • Jun 13th
3 New Dormer Hss Ground Thread M7 x 1 LEFT HAND Taps (WR.8.B.H.5c)

3 New Dormer Hss Ground Thread M7 x 1 LEFT HAND Taps (WR.8.B.H.5c)

  • Perth, Ontario, Canada
  • Jun 13th
Spring-Loaded Tapping Guide

Spring-Loaded Tapping Guide

  • Arlington, Texas, United States
  • Jun 13th
2 NEW NOS Dormer Taps High Speed Steel Ground Thread M7 x .5 (WR.8.B.H.5b)

2 NEW NOS Dormer Taps High Speed Steel Ground Thread M7 x .5 (WR.8.B.H.5b)

  • Perth, Ontario, Canada
  • Jun 13th
2 NOS Dormer Hss LEFT HAND Ground Thread M9 x 1.25 4 Flute TAP WR.8.B.G.6c

2 NOS Dormer Hss LEFT HAND Ground Thread M9 x 1.25 4 Flute TAP WR.8.B.G.6c

  • Perth, Ontario, Canada
  • Jun 13th
3 NEW NOS Dormer Taps Hss LEFT HAND Ground Thread M9 x 1.25 WR.8.B.G.6b

3 NEW NOS Dormer Taps Hss LEFT HAND Ground Thread M9 x 1.25 WR.8.B.G.6b

  • Perth, Ontario, Canada
  • Jun 13th
LOT OF 16 HSS THREAD FORMING TAPS 4-40NC TO 5/16-18UNC REGAL USA GTD

LOT OF 16 HSS THREAD FORMING TAPS 4-40NC TO 5/16-18UNC REGAL USA GTD

  • Ellington, New York, United States
  • Jun 13th
5pcs Brand new HSS trapezoidal metrictap righthand thread lengthened TR16mm x 3

5pcs Brand new HSS trapezoidal metrictap righthand thread lengthened TR16mm x 3

  • China, China
  • Jun 13th
LOT OF 8 HSS PIPE TAPS 1/4"-18NPT TO 1-5/16-16N GREENFIELD R&N USA

LOT OF 8 HSS PIPE TAPS 1/4"-18NPT TO 1-5/16-16N GREENFIELD R&N USA

  • Ellington, New York, United States
  • Jun 13th
5pcs Brand newHSS trapezoidal metric tap left hand thread lengthened TR16mm x 3

5pcs Brand newHSS trapezoidal metric tap left hand thread lengthened TR16mm x 3

  • China, China
  • Jun 13th
5x Brand new HSS trapezoidal metric tap left hand thread lengthened TR 16mm x 3

5x Brand new HSS trapezoidal metric tap left hand thread lengthened TR 16mm x 3

  • China, China
  • Jun 13th

People who viewed this item also vieved

Hi Quality Tools - 2.5MM Set Of 1 Capital Letter Punches 3/32 Inches HQ

Hi Quality Tools - 2.5MM Set Of 1 Capital Letter Punches 3/32 Inches HQ

  • New Delhi, India
  • Jan 30th
3 Used but Good Hand Taps, 5/8" - 11 (x2) & 5/8" - 18

3 Used but Good Hand Taps, 5/8" - 11 (x2) & 5/8" - 18

  • Akron, Ohio, United States
  • Jan 30th
Cleveland 5 Piece High Speed Steel Countersink SET 49 with WOOD CASE

Cleveland 5 Piece High Speed Steel Countersink SET 49 with WOOD CASE

  • Kirkland, Washington, United States
  • Jan 30th
Greenfield 5/16-24 NF GH3 H3 Tap New

Greenfield 5/16-24 NF GH3 H3 Tap New

  • Clarksburg, West Virginia, United States
  • Jan 30th
HANSON WHITNEY 9/16 - 12 SPIRAL FLT HSS HIGH HELIX BLACK OXIDE TAP MACHINIST

HANSON WHITNEY 9/16 - 12 SPIRAL FLT HSS HIGH HELIX BLACK OXIDE TAP MACHINIST

  • Stockton, California, United States
  • Jan 30th
Lot 10 pc USA Hand Tap Greenfield Vermont NC NF-HSS 1/2 5/8 9/16 3/8 ***********

Lot 10 pc USA Hand Tap Greenfield Vermont NC NF-HSS 1/2 5/8 9/16 3/8 ***********

  • Sedalia, Missouri, United States
  • Jan 30th
Hanson 1/16-1/4 drill set

Hanson 1/16-1/4 drill set

  • Rice Lake, Wisconsin, United States
  • Jan 30th
Huge boxlot of new and old taps. 100+ pcs. NO JUNK, ALL USA MADE

Huge boxlot of new and old taps. 100+ pcs. NO JUNK, ALL USA MADE

  • Medina, Ohio, United States
  • Jan 30th
Carbon Steel Metric Tap and Die Set 40 Pc Adjustable Wrench T-Handle Case New

Carbon Steel Metric Tap and Die Set 40 Pc Adjustable Wrench T-Handle Case New

  • San Bernardino, California, United States
  • Jan 30th
41 Piece Tap and Die Set (4-40 -1/2) including 1/8 NPT NEW in Handy Storage Case

41 Piece Tap and Die Set (4-40 -1/2) including 1/8 NPT NEW in Handy Storage Case

  • South Lyon, Michigan, United States
  • Jan 30th
GREENFIELD 1 1/2" 11 1/2 NPT PIPE TAP APPEARS VERY CLOSE TO NEW in ORIGINAL BOX

GREENFIELD 1 1/2" 11 1/2 NPT PIPE TAP APPEARS VERY CLOSE TO NEW in ORIGINAL BOX

  • Plymouth, Michigan, United States
  • Jan 30th
Machinists 11/28B Buy Now USA Brubaker Quality 1/4 NPT Skip Tooth Tap

Machinists 11/28B Buy Now USA Brubaker Quality 1/4 NPT Skip Tooth Tap

  • Lutz, Florida, United States
  • Jan 30th
Machinists 11/28B Buy Now Rare Bison Extended Length 1/4 NPT Tap

Machinists 11/28B Buy Now Rare Bison Extended Length 1/4 NPT Tap

  • Lutz, Florida, United States
  • Jan 30th
MCH -2 pc. 1/8-27 NPT (Tapered Thread Pipe) Tap, HSG

MCH -2 pc. 1/8-27 NPT (Tapered Thread Pipe) Tap, HSG

  • Glenview, Illinois, United States
  • Jan 30th
ThreadIt Tap [ 2 11-1/2" ] NPT USA

ThreadIt Tap [ 2 11-1/2" ] NPT USA

  • Columbus, Ohio, United States
  • Jan 30th
GREENFIELD Plug Spiral Point Taps #10-32 2FL H3 HSS TiCN UNF USA Qty 6 [1912]

GREENFIELD Plug Spiral Point Taps #10-32 2FL H3 HSS TiCN UNF USA Qty 6 [1912]

  • Saint Louis, Missouri, United States
  • Jan 30th
R&N Plug Spiral Point Taps 1/4-20 H3 3FL HSS Penta Blue UNC USA Qty 3 [1912]

R&N Plug Spiral Point Taps 1/4-20 H3 3FL HSS Penta Blue UNC USA Qty 3 [1912]

  • Saint Louis, Missouri, United States
  • Jan 30th
GREENFIELD Spiral Point Plug Taps 1/4-28 H2 2FL HSS Oxide UNF Qty 7 <Z56>

GREENFIELD Spiral Point Plug Taps 1/4-28 H2 2FL HSS Oxide UNF Qty 7 <Z56>

  • Saint Louis, Missouri, United States
  • Jan 30th
GREENFIELD Spiral Point Plug Taps #0-80 H1 2FL HSS Qty 4 &lt;054&gt;

GREENFIELD Spiral Point Plug Taps #0-80 H1 2FL HSS Qty 4 <054>

  • Saint Louis, Missouri, United States
  • Jan 30th
Spiral Point Taps 5/8-11 GH3 3FL HSS-PM UNC Red Ring Qty 2 &lt;056&gt;

Spiral Point Taps 5/8-11 GH3 3FL HSS-PM UNC Red Ring Qty 2 <056>

  • Saint Louis, Missouri, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies