high voltage isolation transformer for sale, brand-new and used.

FURMAN BALANCED POWER ISOLATION TRANSFORMERS MODELS IT-1220 & IT-1230 DISCONTINUED FEATURES: Available in 20 amp and 30 amp models Both models provide precisely balanced AC power for ultra-low-noise installations All

ACME DTGB-063-4S DRIVE ISOLATION TRANSFORMER 63 KVA 3PH Primary 460V Secondary 460Y/266 Dimension: 22.37 Inch Length x 28.15 Inch Width ACME Electric 3-Phase Drive isolation transformer with a rating of 63 kVA has primary configuration of delta and secondary configuration. It has a primary voltage of 460 Volts Delta and secondary voltage of 460Y/266 Volts at 60 Hz. Lugs/bolt-down terminals provide easy connections and transformer has aluminum winding for high conductivity.

The Antek 600VA isolation power toroidal transformers are commonly used for high end equipment such as audio amp and sensitive instrument. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. In addition, there are 2 accessory coils (high current) to add on either input or output coil to boost up output or increase input voltage.

The Antek 1500VA isolation power toroidal transformers are commonly used for high end equipment such as audio amp and sensitive instrument. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. In addition, there are 2 accessory coils (high current) to add on either input or output coil to boost up output or increase input voltage.

Used to correct inline voltage and power conditioning for low power high

Electronic Component

RCA Isotap WP-25A Variable Isolation Transformer This is an isolation transformer with both isolated and non-isolated 105VAC, 115VAC and 130VAC outlets. The knob lets you compensate for line voltages from 105 to 130 volts in 5 volt increments. This adjustment can also be used to fine-tune the voltage of any of the outputs, above or below nominal.

These high quality PowerVar units (Model ABC500-22MED) are marked as 230VAC, 50Hz @ 2.14 Amps and were designed for international use but work just a well at 120VAC 60HZ. Units were removed from laboratory equipment kept in a clean room environment and are in excellent physical condition. Units are intended to provide protection against momentary spike and surges and to provide safe and stable power for very expensive medical equipment and laboratory instruments.

Used Tripp Lite Isolation Transformer. I used it with my oscilloscope to keep me from grounding and killing myself on high voltage. **This transformer has been modified.

VIZ Isotap II WP-27A Variable Isolation Transformer  This is an isolation transformer with isolated two-prong outlet. It includes monitor receptacles for voltmeter probes. With 120 volts in, the transformer lets you adjust the output from 25 to 150 volts in 5 volt increments.

Please see pictures for full details and feel free to message me with any questions. Toroid Corporation ISB-100W Medical Grade Isolation Transformer comes with what you see in the pictures. Specifications are from manufacturer and may vary slightly due to upgrades, options, or revisions this unit may or may not have.

The 600VA toroidal transformers are commonly used in the noise sensitive equipment, high-end audio products, isolation transformer, stepper motor supply, or servo motor supply. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires then the normal requirement to avoid the copper lost during the full power output.

This is a used Dry Type Transformer For Sale. It was removed from service due to plant closure and it WILL BE CLEANED AND TESTED FOR CONTINUITY PRIOR TO SHIPPING! Then it will be placed onto a standard 48"x40" pallet on top of plywood, double banded down, secured to the pallet with screws, then shrink wrapped on our machine.

Auction Wizard 2000 Listing Template - AW2KLOT#:15060 Powervar AC Power Line Conditioner ABC150-11 / 1.5 amps 120V AC We gladly ship to most countries Scroll down for more Photos and details

Brand New Interpoint DC to DC Converter & Switching Regulator Module #MHE2815S. Parts are brand new and have never been used. Surplus from a project.