3 8 bushing for sale, brand-new and used.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE): BOURNS 3851C-282-103B PANEL MOUNT POTENTIOMETER 10K OHM CONDUCTIVE PLASTIC 1 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/8" SHAFT X 5/8"L, 1/4" BUSHING SOLDER LUG TERMINALS New, old stock, with mounting nut and lockwas

THIS IS A PRECISION POTENTIOMETER MADE BY: NEW ENGLAND INSTRUMENT CO. (NEI), STANDARDS DIVISION. MFGR.

Condition: New; old stock. Sold as is. Description: Precision Wirewound Potentiometer 10K

LOT OF 1 (ONE): BOURNS 3852A-282-103A PANEL MOUNT POTENTIOMETER 10K OHM CERMET 2 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/4" SLOTTED SHAFT X 1/2"L, 3/8" BUSHING SOLDER LUG TERMINALS REMOVED FROM NEW EQUIP. with mounting nut and lock washer. These pots have been tested and guaranteed good.

THIS ITEM IS FOR (ONE), SUB - MINIATURE POTENTIOMETER. SPECS: 1K OHM LINEAR TAPER CARBON ELEMENT Stainless-Steel Shaft - 1/8" OD X 1/2"L w/screwdriver slot on end. Body dim, approx.: 3/8" OD X 5/8" Deep including leads, 1/4" bushing mount.

** ALL POTS I SELL ARE TESTED AND GUARANTEED GOOD ** LOT OF 1 (one): CTS VINTAGE POTENTIOMETER W/SWITCH 500K OHM (500,000) +/- 20%, AUDIO TAPER SWITCH: TYPE GC RATED 3A - 125vAC, 1A - 250vAC SPST - N.O. (looking at shaft, full CW, is CLOSED, ON. CCW to max rotation is open, off.

THIS ITEM IS FOR 1 (ONE) PRECISION POTENTIOMETER AS FOLLOWS: VALUE: 10K (10000) OHM 10-TURNS TOL: +/- 5% LIN: +/- 0.5% RATED: 2 WATTS (I think) MADE BY: SPECTROL ELECTRONICS in the USA MODEL: 500-1151 PANEL MOUNT, LOCKING, SCREW DRIVER ADJUST DIM: 7/8" OD X 1 1/2" L BUSHING: 1/2"L made of aluminum. (could b

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR ONE: HELIPOT PRECISION POTENTIOMETER div. of Beckman Instruments, Inc. Fullerton, CA USA P/N: 5311-50-0 3K OHMS (3,000 OHMS) TOL.: 5% LIN: +/- 0.5% LINEAR TAPER CONTINUOUS ROTATION (NO STOPS) Gold plated, turret solder terminals

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR ONE: HELIPOT PRECISION POTENTIOMETER div. of Beckman Instruments, Inc. Fullerton, CA USA P/N: 5311-309-0 3K OHMS (3,000 OHMS) TOL.: 5% LIN: +/- 0.5% LINEAR TAPER Gold plated, turret solder terminals DIM: 1 1/2"" OD X 3/4" DEEP

These are 5 NEW CTS American manufactured Potentiometer's . The value is 50K Ohm linear. It's body is 15/16"diameter type X450, 1/3 watt w/11/16" long p.c.

These are 5 NEW CTS American manufactured Potentiometer's . The value is 15K Ohm linear. It's body is 15/16"diameter type X450, 1/3 watt w/11/16" long p.c.

This is a lot of 5 NEW 50K Ohm mini Potentiometer's w/solder lugs and mounting Hardware. Value: 50 K Ohm Audio ( Log ) Taper Bushing: 9 mm ( 3/8 ) x 1/4" long. Mounts into a 3/8 hole.

Up for bid New PEC Canada POTENTIOMETER MIL Style RV6 The Potentiometer will be sent with its Original Knob MS 91528-01EB (see picture). Precision Series S - 1/2 Watt 1/8" shaft diameter 10% Linear Features hot molded carbon element

THIS ITEM IS FOR (one) 1, SPECTROL Model 157 Precision Potentiometer. Resistance: 50K ohm CONTINUOUS ROTATION (no stop) Conductive plastice element Rotational life: 5 million Tol: +/- 20% Lin: 2% Wattage: 1.0 W P/N: Spectrol/Vishay 157B503MX Bushing mount Approx. dim: 7/8" OD X 1/2" deep.

THIS ITEM IS A: BOURNS KNOBPOT, 10-TURN PRECISION POTENTIOMETER: (ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) MFG: BOURNS "KNOBPOT", CLOCKFACE READOUT, 10-TURN P/N: 3600S-1-103 10K OHM (10,000) RES +/- : 5% RATED: 1.5 WATT DIM: 3/4" X 1" in front of panel 3/8" BUSHING Refurbished with washer, mounting nut. All pot

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE): CLAROSTAT POTENTIOMETER AS FOLLOWS: 5K (5,000) OHM 2 WATT WIRE WOUND LOCKING SCREWDRIVER ADJUST LINEAR TAPER P/N 43C2-5K APPROX. DIM: 1 1/8" OD X 5/8" behind panel, 3/8" bushing New, old stock, tested good and guaranteed, w

10K / 100K Dual Linear Potentiometer 10K / 100K Dual Potentiometer With Solder Lugs 10% Tolerance 100K Top---10K Bottom 1/4" Half-Moon Shaft Bushing: 3/8" Shaft Length: 5/16" Diameter: 15/16" / 24mm Comes with hardware; nut and washer. US Buyers Please Note: Returns and exchanges are accepted within 14 days of the receipt of your item. Please check your item after you receive it, no

THIS ITEM IS FOR ONE: MAUREY INSTRUMENT CORP. PRECISION POTENTIOMETER MODEL: 87-M72-1 5K OHMS (5000 OHMS) 5% LINEAR TAPER CONTINUOUS ROTATION RATED: 2 WATTS DIM: 7/8" OD X 3/4" DEEP SHAFT: 1/8" X 1 1/4" LONG BUSHING MOUNT: 3/8 - 32

LOT OF FIFTY FERRONICS TOROIDS 11-6xx-T NICKEL ZINC FERRITE CERAMIC BEADS SPACERS BUSHINGS WASHERS CORES