Comtorgage Electronic Couplers allow a Comtorgage expansion plug to be used with a digital indicator or a probe-style electronic transducer. A 3/8" (or 8mm if requested) diameter bushing is provided to hold the stem of the indicator or the probe body. The coupler requires a minimum combined length of a digital indicator stem and contact of 1 3/8", so the indicator must either have a long stem or a long contact.
FLEXBAR Flexbars® "IN-LINE"FINE ADJUSTOR WITH V-MAGNETIC BASE - Model: 18059 Base Length: 2" Height: 18-1/2" 18059 IN-LINE FINE ADJUST W/ VMAG BASE - FLEXBAR Feature
Model #: 14737Magnetic Stand with Centralized Clamp Centralized clamp allows locking in any position Prismatic base Dial gage holder: 3/8" diameter with
T&O FLEXIBLE MAGNETIC BASE - Model: MBFTO HOLDING POWER: 180 Ibs ARM LENGTH: 13.78" (350mm) T&O FLEXIBLE MAGNETIC BASE Features Holds 3/8" and dovetail indicators.
T&O UNIVERSAL MAGNETIC BASE - Model: 1030 TO HOLDING POWER: 180 Ibs ARM LENGTH: 11" (280mm) T&O UNIVERSAL MAGNETIC BASE Features Holds 3/8" and dovetail indicators.
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.
Drill Jigs – Principles of Design – Examples From Practice- Dimensions of Jig Bushing, Third Edition, Machinery’s Reference Book No. 3, originally published by The Industrial Press, New York, NY, 1913. Reprinted by Nation Builder Books, Leesburg, VA, 2005, 5 1/2 x 8 1/2 softcover, 56 pages.
Global CNC Lathe Bushing This is NEW in PVC, Bushing from Global CNC, never mounted or damaged. C Type. They are considered to be universal and can be used for several set screw configurations.
This is a Quick-Grip Screw-Clamp Saw / Sprocket Arbor Adapter used to fasten a saw blade or sprocket with a 1-3/8" bore onto a 1/2" diameter shaft. Here's how it works:1) Remove the clamping nut2) Slide the adapter into position on the 1/2" shaft3) Place the saw blade or sprocket (up to 1/4" thick) with a 1-3/8" bore onto the adapter4) Replace the clamping nut and tighten to secure onto the shaft This only takes a minute and you are ready to go! The nut is 1-5/8" across the flats and abou
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
