3 8 bushing for sale, brand-new and used.

LOT OF 1 (ONE): CTS/IRC POTENTIOMETER AS FOLLOWS: 500 OHM 2 WATT WIRE WOUND LOCKING SCREWDRIVER ADJUST LINEAR TAPER APPROX. DIM: 1 1/4" OD X 5/8" behind panel, 3/8" bushing This pot is marked CTS WPRL 500 and looks like a 1960's date code. The top plastic is embossed with IRC.

THIS ITEM IS FOR 1 (ONE): BOURNS 3852Z-A98-194A PANEL MOUNT POTENTIOMETER 190K OHM CERMET 2 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/8" SHAFT X 1/4"L, 1/4" BUSHING SOLDER LUG TERMINALS New, old stock, with mounting nut and lockwasher. Buyer pays S&H, $2.75 in USA, $7.75 worldwide. Payment, with-in

LOT OF 1 (ONE): BOURNS 3852Z-AB4-504A PANEL MOUNT POTENTIOMETER 500K OHM CERMET 2 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/8" SHAFT X 5/16"L, D flat. 1/4" BUSHING SOLDER LUG TERMINALS New, old stock, with mounting nut and lockwasher. Buyer pays S&H, $2.95 in USA, $7.95 worldwide.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE) SPECTROL MINIATURE POTENTIOMETER MFGR: ETI BUSHING MOUNT 10-TURN POT MODEL: MW10-10B WIRE WOUND RESISTANCE: 1K (1,000) OHMS TOL: 3% res., 0.25% lin. WATTAGE: 1 WATTS TURNS: 10 TURNS Anodized aluminum housing

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR: 1 (ONE): CTS POTENTIOMETER AS FOLLOWS: 5K (5,000) OHM 2 WATT WIRE WOUND LOCKING SCREWDRIVER ADJUST LINEAR TAPER APPROX. DIM: 1 1/4" OD X 5/8" behind panel, 3/8" bushing Refurbished, tested good and guaranteed, with lockwasher, mounting nut, and locking nut.

H.H. Smith, Shaft bushing for 1/4 inch shafts. 3/8 inch thread on outside similar to thread on potentiometers variable capacitors, etc, or any item with standard bushings.

BOURNS P/N 82C1A-E12C26 POTENTIOMETER 2.5 MEG OHM 1 WATT 10% AUDIO TAPER CERMET RESISTANCE ELEMENT 5/8" SQUARE, SINGLE TURN, SCREW-DRIVER ADJUST TERMINALS ARE J-HOOKS 1/4" BUSHING, WITH MOUNTING NUT AND LOCK WASHER. Each item is for 1 pot. New, old stock.

New unused stock from my company that used to sell an industrial product that used these potentiometers. They are well made and were 100% reliable in our application. The pots were manufactured by Clarostat before the brand was acquired by Honeywell.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE): BOURNS 3851C-282-103B PANEL MOUNT POTENTIOMETER 10K OHM CONDUCTIVE PLASTIC 1 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/8" SHAFT X 5/8"L, 1/4" BUSHING SOLDER LUG TERMINALS New, old stock, with mounting nut and lockwas

THIS IS A PRECISION POTENTIOMETER MADE BY: NEW ENGLAND INSTRUMENT CO. (NEI), STANDARDS DIVISION. MFGR.

Condition: New; old stock. Sold as is. Description: Precision Wirewound Potentiometer 10K

LOT OF 1 (ONE): BOURNS 3852A-282-103A PANEL MOUNT POTENTIOMETER 10K OHM CERMET 2 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/4" SLOTTED SHAFT X 1/2"L, 3/8" BUSHING SOLDER LUG TERMINALS REMOVED FROM NEW EQUIP. with mounting nut and lock washer. These pots have been tested and guaranteed good.

THIS ITEM IS A: BOURNS KNOBPOT, 10-TURN PRECISION POTENTIOMETER: (ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) MFG: BOURNS "KNOBPOT", CLOCKFACE READOUT, 10-TURN P/N: 3640S-1-103 10K OHM (10,000), WIREWOUND RES +/- : 5% RATED: 2.5 WATT DIM: 1 1/4" DIA X 1 1/2" LONG 3/8" BUSHING Refurbished, with washer, mounting nut. All pots

THIS ITEM IS FOR (ONE), SUB - MINIATURE POTENTIOMETER. SPECS: 1K OHM LINEAR TAPER CARBON ELEMENT Stainless-Steel Shaft - 1/8" OD X 1/2"L w/screwdriver slot on end. Body dim, approx.: 3/8" OD X 5/8" Deep including leads, 1/4" bushing mount.

** ALL POTS I SELL ARE TESTED AND GUARANTEED GOOD ** LOT OF 1 (one): CTS VINTAGE POTENTIOMETER W/SWITCH 500K OHM (500,000) +/- 20%, AUDIO TAPER SWITCH: TYPE GC RATED 3A - 125vAC, 1A - 250vAC SPST - N.O. (looking at shaft, full CW, is CLOSED, ON. CCW to max rotation is open, off.

THIS ITEM IS FOR 1 (ONE) PRECISION POTENTIOMETER AS FOLLOWS: VALUE: 10K (10000) OHM 10-TURNS TOL: +/- 5% LIN: +/- 0.5% RATED: 2 WATTS (I think) MADE BY: SPECTROL ELECTRONICS in the USA MODEL: 500-1151 PANEL MOUNT, LOCKING, SCREW DRIVER ADJUST DIM: 7/8" OD X 1 1/2" L BUSHING: 1/2"L made of aluminum. (could b

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR ONE: HELIPOT PRECISION POTENTIOMETER div. of Beckman Instruments, Inc. Fullerton, CA USA P/N: 5311-50-0 3K OHMS (3,000 OHMS) TOL.: 5% LIN: +/- 0.5% LINEAR TAPER CONTINUOUS ROTATION (NO STOPS) Gold plated, turret solder terminals

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR ONE: HELIPOT PRECISION POTENTIOMETER div. of Beckman Instruments, Inc. Fullerton, CA USA P/N: 5311-309-0 3K OHMS (3,000 OHMS) TOL.: 5% LIN: +/- 0.5% LINEAR TAPER Gold plated, turret solder terminals DIM: 1 1/2"" OD X 3/4" DEEP