3 8 clamps for sale, brand-new and used.

Eastwood louver machine. The lower die/table is approx. 22" long.

I am selling here a used bend die/radius block. It is for bending 2" diameter tube on a 3" center line radius. It has a 4" clamp welded in.

I am selling here a group of tooling as a lot for a 3-CP end finishing machine. This lot of tooling consist of the following items, ONE CP-1 Spindle Adaptor, ONE CP-10 Heavy Duty Spindle Adaptor, ONE BHA-30 Beading Head Adaptor, ONE SET Die Adaptors,[to use 2-CP dies in a 3-CP machine] ONE Misc Collar for a Spindle Adaptor, and ONE center section from ????. The BHA-30 is brand new, never used.

I am selling here a used bend die/radius block with 4 sets of clamps. It is dirty and has some surface rust, but nothing form prohibiting its intened use. It is for bending 4" diameter tube on a 5" center line radius.

Machine Under Power in our Factory. 1983: 55 Tons, Punch 1/4” material (3/8 with optional clamps) Punch 50”X 50” sheets or longer with auto re positioning. 44 Station 1/2” through 6” Station Blank parts up to 6.2 Diagonal Includes Full Set of Holders, Qty 4 C station=2", Qty 3 D station=3-1/2, Qty 1 E station=4-1/2, Qty 1 F sta.=6.2".

Gold International Machinery Corporation GOLDMACHINERY.COM | DGOLD@GOLDMACHINERY.COM

Features Guaranteed square parallel within .0002". Hardened & ground to RC 58-60. 90° Vee blocks.

We Have 1,000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us @ 909.919.9600! NL Make: Mitutoyo Model: 513-118 Condition: Great Specifications: Clamp Capacities: 7/32" & 3/8" Arm Shank(s): 7/32" Case is included in this lot Comes as shown in pictures.

A used Starrett #671 Universal Attachment. For use with indicators with a standard .375 (3/8 inch) stem diameter. It clamps on the indicator stem and its movement is transmitted through the contact point to the indicator.

Here is a Mr. Shims shaft alignment tool set No. 20 RA with 2 Starrett No.

SHAFT ALIGNMENT DIAL INDICATOR ROLLER CHAIN JIG MILLWRIGHT & MAINTENANCE IT'S ON EVERY MILLWRIGHT AND MAINTENANCE TOOL LIST A TRUE CRAFTSMAN MUST HAVE AT LEAST ONE IN THEIR TOOLBOX NOTE "TWO ARE NEEDED FOR REVERSE AND NEW METHOD OF ALIGNMENT PROCUDURES OVER 35 YEARS OF EXPERIENCE WENT INTO THIS ONE 6061 AIRCRAFT ALUMINUM