This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.
This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.
36' of new/unused and two lengths (21' and 13') of undamaged/used -- 70' total -- 1/2" flexible type NM conduit left over from a recent HVAC renovation. Would consider breaking up the lot, if you need smaller lengths. Specs: Liquidtight Flexible Nonmetallic Conduit.
Bends offsets in one easy operation. Insert conduit, depress handle, release and remove conduit Makes identical offsets every time for wall mounted boxes with exposed conduit Creates offset that matches the knockout in box Maximum offset of 0.56" (9/16) Conduit Type : EMT
Here we have a vintage Greenlee Model 740 Electrician's knockout cutter. It will cut holes for these conduit sizes - 1-1/2", 2", 2-1/2", & 3". It is well used, dirty, greasy, and has surface rust.
This would be ideal for sheds or small buidings where you can't bury cable. According the info on the box. The head will accept the following wire sizes.
Greenlee 1800 Mechanical Bender for 1/2, 3/4 & 1 inch IMC Rigid Steel & Aluminum Conduit Used - excellent condition - Greenlee 1800 Mechanical Ratchet Style Bender as per photos. Purchased new in 7/18/2003 from Mayer Electrical Supply in Birmingham, Al. The last photo is of the 14 page manual that was laminated to preserve its use.
THE TOOL STORE 490 JERICHO TPKE, MINEOLA NY-USA (516)747-0651 MAXIS 3000 PULLER W/ALL ATTACHMENTS & MILLWAUKEE SUPER HAWG DRILL CONDITION EXC WORKING MAXIS 3000 PULLER W/ALL ATTACHMENTS & MILLWAUKEE SUPER HAWG DRILL - ALL PARTS SHOW One person, 2 minute set up and operate 2 Pulling speeds: 25 fpm on low (at no load) and 100 fpm on high (at no load) Quickly adapts from underground to overhead pulls No need to bolt to the ground on most pulls Able to pull up to 8 ft. of wire out of the conduit
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.