3 electrical conduit for sale, brand-new and used.

This is a 1" Conduit hole cutter. The actual hole diameter is 1 3/8" for 1" conduit fittings. It is similar to the Ideal TKO hole cutters but not made by the same supplier that Ideal uses.

This is a 3/4" Conduit hole cutter. The actual hole diameter is 1 1/8" for 3/4" conduit fittings. It is similar to the Ideal TKO hole cutter but not made by the same supplier that Ideal uses.

4 piece set of replacement pilot drill bits for Trades Person Tools carbide toothed conduit hole cutters. These also fit the Ideal Brand TKO hole cutters as well. Very similar to the Ideal 36-312 part number.

WE ARE SELLING A NEW MERCOID AIR BI-METAL TEMERATURE SWITCH MODEL# M-51-74 Bi-metal air temperature switch, opens on temp. rise, range 50-500°F (10-260°C), min. deadband 20°F (11°C), automatic reset GENERAL DISCRIPTION INFO: Service: Compatible gases.

Cooper B-Line Conduit Box Support Fasteners---25 NEW Box of 25 1/2" or 3/4" conduit & box support fasteners For # 12 wire to 1/4" plain rod Will support electrical box & conduit to ceiling grid wires They are 18" long and 3/4" wide If you are the lucky buyer-- you'll get a $5 Target giftcard

Enervex EFH 200 Exhaust Fan Exclusive Closeout brought to you by Volko Supply! An economical option over a GSV or RS fan where up to 600 CFM's is required. Usage includes exhausting kitchen hoods, gas fireplaces, bathrooms and maintaining negative pressure in duct systems.

(75) New Chic #15 (3/8") pipe holders(see picture).You can use these hangers on:Plumbing PVC 3/8" Sch. 40 & 80,Electrical conduit,Plastic tubing up to 1/2",plus I have lots of other PVC parts.Any questions,just email me?.Comes from a smoke-free home.Also,check out my other PVC auctions.Come with free Delivery Confirmation.Shipping in the U.S. is (9.00),slightly more else where.Thanks J.

New Page 1

8 - New 1" Rigid Connectors Set Screw, Die Cast Steel For Rigid Metal Electric Conduit No Threading Necessary

Here we have five boxes of straps to fit 3/4" EMT electrical conduit. Each box contains 100 straps. These straps are for use with the Powers Trak-It fastening gun.

O-Z Gedney 3/4" EYA-EYAM Vertical/Horizontal Sealing Fittings Hazardous Loc. Use: To seal conduits in vertical or horizontal runs. To minimize the passage of gases and vapors and prevent the passage of flames from one portion of the electrical system to another through the conduit.