3 inch aluminum tubing for sale, brand-new and used.

These arer three 37mm cyclone samplers for collecting particles They are sold by SKC Cat. No.

ELDEX CH-150 Column Heater Verified to power up and that controller will raise internal temperature. See below for further details. 1.

The Eldex Column Heater improves the reproducibility of retention times in chromatography by providing a stable, temperature controlled environment, controlling temperatures from 5°C above ambient to 150°C. Insures Reproducible Analyses The Eldex column heater will accommodate up to four standard 30cm columns up to 3/8 inch O.D., plus guard columns. A variety of column sizes can be used in the same heater, as the aluminum inserts are interchangeable.

Hydraulic Swaging HVAC Tool Kit Tube Expander 7 Lever Tubing Expander Tool Description

CT-300AL Hydraulic Expander Flaring Tool Hydraulic Flare Tube Expanding Tool Kit Six Easy steps: 1.Deburr inside of tube. 2.Anneal the tube if necessary(for hard or thickwall tube). 3.Screw the expander head on expander.

CT-100AL/ML Lever Tube Expanding Tool Copper Pipe Expander Kit Six Easy Steps: Deburr inside of tube. To create perfectly expanded tubing for soldering or brazing, you must use soft copper or fully anneal end of tube to be expanded. Pull expander handle up to 90-degree position.

CT-100A Lever Tube Expanding Tool Copper Pipe Expander Kit Six Easy Steps: Deburr inside of tube. To create perfectly expanded tubing for soldering or brazing, you must use soft copper or fully anneal end of tube to be expanded. Pull expander handle up to 90-degree position.

CT-300AL Refrigeration Hydraulic Expanding Tool Kit with Tube Cutter Six Easy steps: 1.Deburr inside of tube. 2.Anneal the tube if necessary(for hard or thickwall tube). 3.Screw the expander head on expander.

800-929-0927

Includes Step by Step Construction Plans with over 90 High Resolution Photos On CD in PDF format After ton's of requests, here it is. The stuff you need to get a quick start on your Tesla Coil and save a couple hundred bucks in the process ( top line, no dryer tubing!) You get everything listed including: (50) Feet of pure copper tubing (1) 10 amp Variac Use

PHR-1 Small Portable Rockwell Hardness Tester Introduction

For your consideration a used PETERSON shaft alignment kit model 20ra, THIS ITEM HAS SEEN LITTLE USE AND IS IN FLAWLESS OPERATIONAL CONDITION, no issues hear. NOTE: dial indicator assemblies NOT included. Developed for smaller equipment where space is at a premium, the model #20RA alignment system comes with every component necessary to align machinery with shaft sizes from 3/4" to 4" in diameter.