3 inch flange for sale, brand-new and used.

43 Series Fittings

NEW EGD HYDRAULIC SHOCK ABSORBER 3/4" BORE X 2" STROKE This is an Auction for a Brand New EGD Hydraulic Shock Absorber with a 3/4" Bore and 2" Stroke. The 3/4” adjustable LOAD-STOP provides a uniform, gentle deceleration of any moving load from 25 to 25,000 pounds, or where the velocity and weight combination equals 4000 inch- pounds. Where the load weight and velocity change, the simplicity of adjusting this unit makes it particularly easy-to-use.

Payment Policy Brand New Sony CyberShot 8 MP Di

New old stock. 3/4 inch diameter. The frosted flange is 1/8" thick, the clear center is 1/4" thick.

This is for qty.1 of a New old stock LARGE 2" diameter with 4.5 tpi threads per inch right hand threads eye bolt without a Flange. Has some very light surface corrosion from shelf time, nothing serious at all. It is made by Armstrong in the US America Model 89-016 The through hole measures approx.

REDUCED PRICE! This stainless steel tank is in very good, practically excellent, condition. It was used to carry liquid ammonium nitrate used in explosives in a rock quarry operation.

This sat around for years, never used, dusted them off to sell. Flange is approximately 5.5" in diameter. FREE PRIORITY MAIL SHIPPINGGet Them Quick!

NIBCO CHEMTROL 4 INCH 150 PSI PVC 1 FLANGE 9 INCH OUTER DIAMETER X 2 3/4 WIDTH SCUFF MARKS INVENTORY # J54759 NEW/OLD STOCK WE OFFER COMBINED SHIPPING PLEASE WAIT F

The MX Series is a state-of-the-art mixing valve that manages the hot and cold supply based on control settings. Accurate control of temperature provides energy savings, increased comfort and safety. The Teflon wear surfaces prevent calcium buildup.

This valve was slightly damaged when I lifted it up.  You can see the broken fitting in the photos.  You'll need a new 1/2 inch brass nipple and a 3/4 inch - 1/2 inch brass step down or you'll need to tap the broken piece out.

Genuine U.S. Military Issue Surplus PJ Valves Inc.

New Casappa Cast Iron Pump, 3.45 cubic inch per revolution, left hand rotation, SAE 11 tooth spline shaft, SAE "A" 2 hole mounting flange, rear ports, buna seals. Model Code KP30.56SO-07S1-POG/OF-N-CSC. More available!

Dynamic Fluid Components - Hydraulic Gear Pump GP-F20-30-P1-A Mount: SAE A , 2-Bolt Flange Shaft: 3/4" Keyed Displacement: 1.83 cubic inch (30cc) Rotation: Counterclockwise Ports: (in) -16 ORB, (out) -12 ORB

1/25 horsepower Flow Range: 0- 17 GPM, Head Range: 0- 19.5-Feet Motors: 2 Pole, Single Phase, 115-Volt Connection: Flange - (2) 1/2-Inch Diameter Bolt Holes Maintenance-free, low energy consumption, easy to install, quiet running Grundfos UPS15-58FC circulator pump (Grundfos# 59896341) incorporates a cast iron housing, three speed motor (Low/Med/High) and a built-in, removable check valve. Grundfos UPS15-58FC is among the most popular and most versatile circulator pump models on the market.

Used- Franklin submersible pump. I just got 2 of these units in. Unable to test.

Stokes 1722 Multi-Stage Mechanical Vacuum Pump (New List $49,000) The system was removed from a University and was running in a light duty application. The Stokes package has the OEM electrical panel. The belt guards, pulleys and gas ballast lines are included and will be installed prior to shipping.

This is used and has some staining and a few small nicks and dings. It is 4 inches long overall and has a 1 1/2 inch tube witha 3 1/2 inch flange. The rotatable flange has 6 through holes for 5/16ths bolts.