3 of 4500 for sale, brand-new and used.

4 1/2" uniloy blow molder '95 for sale

4 1/2" uniloy blow molder '95

  • Fort Worth, Texas, United States
  • US $149,500.00
  • Jan 30th
Uniloy Reciprocating Screw Blow Molder Single Head - Dual Alternating Clamps Series: Liberty Model: IS4500 New: 1995 Extruder: Diameter: 4 1/2" LD Ratio: 24:1 Shot: 3250 g. Type: Calzoni Drive Pump Motor: 200HP Capacity: 800lb p/hr. Clamp: Pressure: 60 Ton Platen: 24" x 30" Min/Max Shut: 14"/18" Tie Bars: 4 / Diameter: 3" Stroke: 54" Head: Single 8lb Electrical: 250HP; 460V; 418 Amps; 329 KVA Air: 100 PSI; 65 CFM Water: 60 PSI; 70 GPM; 35F
Great condition used coin operated laundry equipment for sale

Great condition used coin operated laundry equipment

  • Addison, Illinois, United States
  • US $100,000.00
  • Jan 30th
All Equipment is used and good condition. Just closed the Laundromat and all machines are tested and working. Photos show card system but we have converted them back to coin for sale.
2003 daewoo puma 2000sy 5 axis cnc lathe w/subspdl, live tooling, bar feed for sale

2003 daewoo puma 2000sy 5 axis cnc lathe w/subspdl, live tooling, bar feed

  • Harrison, New Jersey, United States
  • US $89,500.00
  • Mar 11th
Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy
Sullair air compressor model xhg800m-14 for sale

Sullair air compressor model xhg800m-14

  • McAlester, Oklahoma, United States
  • US $70,000.00
  • Jan 30th
Groundwork’s XHG800M-14 Air Compressor is a portable, double screw air compressor with 800 CFM capacity. It is powered by a 6-cylinder Cummins diesel engine, measures 3980 (L) x 1980 (W) x 2320 (H) mm (157 x 78 x 91 in) and weighs 4500 kg (9920 lb).
Core drilling rig, hydraulic-diamond products core bore / weka, char-lynn for sale

Core drilling rig, hydraulic-diamond products core bore / weka, char-lynn

  • Southborough, Massachusetts, United States
  • US $70,000.00
  • Jan 30th
For Sale 2001 International 4700 lowprofile 9,900 miles (non CDL truck 22,000 LB’S) DT466E 2300 hrs 7.1 straight 6 cylinderTurbo IH engine 30 Qt capacity, the best engine runs perfectly clean. With engine heater and three new batterie’s  starts right up.Allison 4 speed automatic with Econo saver19.5 rubber, 2 brand new Firestone front tires high speed balanced with 85% on the rears duals.
20" w 40" l clausing csg2040a sdiil surface grinder, vertical feed powered by du for sale

20" w 40" l clausing csg2040a sdiil surface grinder, vertical feed powered by du

  • Harrison, New Jersey, United States
  • US $58,295.00
  • Jan 30th
Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy
2006 ycm gt-250ma cnc lathe w/live tools & 3 axis fanuc txp 200e control, for sale

2006 ycm gt-250ma cnc lathe w/live tools & 3 axis fanuc txp 200e control,

  • Harrison, New Jersey, United States
  • US $49,500.00
  • Mar 11th
Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Check out these interesting ads related to "3 of 4500":

2008 trine 4500 roll fed bottle labeler, labeling machine for sale

2008 trine 4500 roll fed bottle labeler, labeling machine

  • Caddo Mills, Texas, United States
  • US $42,000.00
  • Jan 30th
2008 trine 4500 roll fed bottle labeler, labeling machine for sale

2008 trine 4500 roll fed bottle labeler, labeling machine

  • Caddo Mills, Texas, United States
  • US $42,000.00
  • Jan 30th
02 nakamura tome tmc-30 cnc lathe with tail stock , low hours ! for sale

02 nakamura tome tmc-30 cnc lathe with tail stock , low hours !

  • Brookville, Ohio, United States
  • US $40,000.00
  • Jan 30th
Nakamura Tome TMC-30 with Fanuc 0T control with extended memory and macro, chip conveyer, 10 station tool turret with some Sandvik tooling, a set of tool holder bushings, a large 2.5 inch diameter through draw tube , also includes a new collet chuck that uses B60 style collets, and a 10 inch 3 jaw KITIGAWA chuck.
Denmat sapphire plus detection system for sale

Denmat sapphire plus detection system

  • Fayetteville, Georgia, United States
  • US $39,899.00
  • Mar 1st
sellercore v\:* {behavior: url(#default#VML);} o\:* {behavior: url(#default

Check out these interesting ads related to "3 of 4500":

Daewoo puma-230 2-axis cnc turning center for sale

Daewoo puma-230 2-axis cnc turning center

  • Deer Park, New York, United States
  • US $39,500.00
  • Jan 30th
2012 doosan xp375 for sale

2012 doosan xp375

  • Lebanon, Pennsylvania, United States
  • US $39,500.00
  • Jan 30th
FOR SALE IS A 2012 DOOSAN XP375 AIR COMPRESSOR IN EXCELLENT CONDITION. THIS MACHINE HAS 678 ORIGINAL HOURS AND COMES WITH A JOHN DEERE DIESEL TIER 3 ENGINE THAT PRODUCES 125 HP. I HAVE JUST REPLACED ONE OF THE STRONGBOX BATTERIES, AS IT WAS PRODUCING LOW COLD CRANKING AMPS.
1997 okuma lb-15ii-w cnc cnc lathe w/sub-spdl & osp 7000l control w/igf for sale

1997 okuma lb-15ii-w cnc cnc lathe w/sub-spdl & osp 7000l control w/igf

  • Harrison, New Jersey, United States
  • US $39,500.00
  • Jan 30th
Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy
Fel-tech ft series  3319 impact energy hydraulic hammer breaker attachment for sale

Fel-tech ft series 3319 impact energy hydraulic hammer breaker attachment

  • Worcester, Massachusetts, United States
  • US $36,950.00
  • Jan 30th
Kolbus perfect binder for sale

Kolbus perfect binder

  • Kansas City, Kansas, United States
  • US $35,000.00
  • Jan 30th
Offered One Kolbus Perfect Binder KM490 Ser. No. 76 rated speed 10000 cycles per hour, Kolbus 24 Pocket Collator, 440 Volts 3/phase, 125 Amps.
Gasonics aura 1000 plasma asher descum semiconductor process equipment for sale

Gasonics aura 1000 plasma asher descum semiconductor process equipment

  • Santa Clara, California, United States
  • US $35,000.00
  • Jan 30th
Condition: Complete, working, We sell it at AS IS Where IS( Refurbished by seller with installation and warranty is optiona

Check out these interesting ads related to "3 of 4500":

3 of 4500 for sale, Bell helicopter special factory tools huge bulk lot from service center 206 473 of 4500 for sale, Bottle blow molding machine with compressors & dryer, blow molder with molds.3 of 4500 for sale, Spray foam trailer : spray foam rig contractor grade equipment h30 , e30, e203 of 4500 for sale, Master casting models-white metal- fashion, costume,religious, recognition more3 of 4500 for sale, Okuma - lt15 m   19973 of 4500 for sale, Complete spray foam rig / trailer : h30 proportioner with 150' hose : 7x16ta e303 of 4500 for sale, Spray foam trailer : spray foam rig contractor grade equipment h30 , e303 of 4500 for sale, Complete spray foam trailer ; h30 with electric compressor, spray foam equipment3 of 4500 for sale, Complete spray foam trailer, spray rig, h30 with generator slide, never used3 of 4500 for sale, Pai 4500 case palletizer high speed up to 60 cpm3 of 4500 for sale, Pai 4500 case palletizer high speed up to 60 cpm3 of 4500 for sale, Pai 4500 case palletizer up to 60 cases per minute3 of 4500 for sale, Pai 4500 high speed case tray palletizer3 of 4500 for sale, Carpet cleaning truckmount and chevy van special!3 of 4500 for sale, Spray foam equipment with shore power : h30 with 150' heated hose3 of 4500 for sale, Cvc high vacuum  filament thermal evaporator with glass belljar3 of 4500 for sale, Technical instruments/leica inspectron 880 wafer defect review microscope3 of 4500 for sale, Lincoln ed031329 blue max lnm 4500 .045" x 33 lb spools for ss -skid of 1419 lbs3 of 4500 for sale, Varian ion implanter 350d 6inch used but working condition.3 of 4500 for sale, Goodspeed back knife automatic woodturning copy lathe 51 inch w hopper coyer

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies