NEW or like new 14.5 inch cast iron dual belt pulley / sheave / flywheel designed for an air compressor pump. Looks unused with no wear and 99% of OEM black paint. Center bore is for a tapered crankshaft.
This auction consists of an antique flat pulley or flywheel for a small stationary engine. It measures approximately 7-inches in diameter. The center hole is approximately 1-1/4 inch and it's 3-1/8 inch wide.
For auction or BIN I have an arbor pulley for a Delta Unisaw in good condition. Shows signs of use and wear, but has plenty of life left. OD is 3", width is 1-3/4", bore is 17mm(0.673").
Aluminum Campbell 15LP Industrial Stringing Block Cable Rope Pulley! Measures: 25" Tall Appr. (All Included With Top Piece Attachment Top - Bottom) 15 3/8" Wheel Diameter Alone 4" Wide Wheel Opening Including Edge Rim 8 3/8" Wide At The Widest Point Of The Base
This is a real nice original cast iron pulley for an International Harvester 1 1/2-2 1/2 or 3-5hp LA or LB gas engine. It is part number 3591-D and is in excellent condition with no cracks, breaks, or repairs of any kind. It has a 5 inch face and is 4 3/4 inches in diameter.
This is a real nice original cast iron clutch pulley for a 2 1/2hp Mogul or 3hp Type M gas engine made by the International Harvester Company. It is in excellent condition with no cracks, breaks, or repairs of any kind except one repaired spoke on the carrier. A very nice job was done and it's very tough to notice especially when it's on an engine.
Here is a vintage Westinghouse Electric motor 1/3 HP, 1725 Rpm, 115 volt, 5.7 amps, 1 phase, Continuous hours, with a 6 inch pulley. tested and works great and quiet. missing electrical cover.
For Sale: Antique Empire 2 1/2 HP hit and miss gas engine. This is a nice engine that has the magneto and a pulley. The brass tag states Empire, Empire Cream Separator Co.
*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) STATES. ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE* ________________________________________________________________________________________________________________ Model: VIR140002 Condition: New Description: Winch - Commercial Duty Features: 120 V
You are bidding on an excellent running, all original 1 3/4hp S Economy built in 1925. Serial #331177. The engine has almost zero wear, every pin and bushing is nice and tight with no slop.
CNC Engraving Machine Accessory 5M Timing Pulley Belt Set Kit Reducer Ratio 2:1 - Timing Pulley Sizes are 30teeth with 10 mm bore and 15 teeth with 6.35mm Bore- The Pulley width is 16mm- Belt Length is 300mm with 60 teeth - Belt Width is 15mmNOTES: - The small timing pulley is also available with a 6mm or 8mm bore size... leave a note when ordering if you want a different bore size... if you don't leave a buyers note you will receive a 15 tooth with 6.35mm Bore small pulley!!!
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.