3 pulley for sale, brand-new and used.

This is an original cast iron pulley for a Fairmont railroad speeder car gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind except for a separation on the raised edge. This should be an easy repair or it would also be easy to remove the raised edge.

This is a real nice original cast iron clutch pulley for a Hercules or Economy hit and miss or throttle governed gas engine. It is a #1 and was made by the Edgemont Machine Company and I'm pretty sure it's the smallest one they made in this style. It is in excellent condition with no cracks, breaks, or repairs of any kind that I can see or know of.

Genuine U.S. Military Issue Surplus Four Groove - V-Belt Pulley (NOS) NOS = New Old Stock   We have no idea who made this pulley or what it fits on. On the pulley it has the following....

I'm selling this Coil wire / Winder machine. I don't know about this machine because my Dad was the owner and he

Here's a nice, powerful 12-24VDC brush motor with a gearbox and pulley attached. At its nominal 24VDC, it spins 45rpm, draws 280mA no load, and stalls a 750mA. 7.5 in-lbs of torque and is rated for continuous duty.

TS550 motor produces almost no noise, saves energy (60-80%) and is brushless, speed djustable and durable. It provides a high starting torque even at low speed or from a complete stop. By using a modern technologically advanced microprocessor,Hall sensor and Pulse-Width Modulation technology,the motor can be set to rotate at different maximum speeds, in either normal or reverse directions, and can start with different accelerating speeds.

Industrial Equipment Expert, LLC

Gates TL18H100 PowerGrip Sintered Steel Timing Pulley, 1/2" Pitch, 18 Groove, 2.865" Pitch Diameter, 1/2" to 1-1/4" Bore Range, For 3/4" and 1" Width Belt currently using a 5/8 bore with key not included.

Master Cross Reference Data (MCRD) - shows alternate part numbers for a national stock number NSN Description MCRL Information

This auction is for an old Emerson 1/3 HP electric motor that is still in working condition. This is a blower or fan motor and has a 4 inch diameter pulley mounted on the end. The electrical chord on this will need to be replaced.

Back by Popular Demand WW-650 Spindle. By: Wolfgang Engineering.

Die Cast Pulley 1-3/4" dia. 3/4" bore Vee belt A. For fractional horse power use only.

Offering a 6 step spindle pulley for an Rockwell Delta 15" drill press Fits 15-600 series drill press, with 6 speeds and 6" stroke This pulley uses 3/8" wide belt For some reason the fins were cut out as you see in the last picture It really doesn't affect it's use, but I priced it lower due to this Any questions: e-mail lathemill@juno.com , or call 724

Industrial Equipment Expert, LLC

Cast Aluminum Lineman's Single 3" Wide Sheave CABLE, WIRE HANGING PULLEY, Block Snatch Trolley ... Unbranded, only marked #2980401 ... Spring Angle Adjust, 7" from Trolley Hook Center to Pulley Center CONDITION: Excellent condition, only some light cosmetic wear, no major damage or rust, everything moves freely - being offered as is, as described, as shown in the photos.