3 pulley for sale, brand-new and used.

BRAND NEW!!! This is a Brand New motor from SANYO-DENKI, bulk packaged. No scratches or any defects to the motors.

A used Sanyo Denki step-syn stepping motor DC 2A 1.8 DEG type 1037126-1841 shaft is 1/4 inch by 3/4 inch comes with free pulley on shaft. I will be listing other stepping motors and will combine shipping

BALDOR / BOEHM DC MOTOR VOLTAGE DC 100 AMPS .8 FRAME # 10 SPEC # 2751G SR # 278 B THE BALDOR MOTOR FLAT PULLEY TURNS MANDREL PULLEY 3:1 RATIO BALDOR MOTOR SHAFT SIZE 5/16" x 1" NOT A PM MOTOR MOTOR TESTED WORKS FINE INSPECTION OF COMMUTATOR SHOWS VERY LITTLE BRUSH WEAR. APPROXIMATE SIZE MOTOR & BASE PLATE 6" X 5"X 4 "

WE ARE SELLING A USED PACIFIC SCIENTIFIC BRUSHLESS SERVOMOTOR MODEL# R46GENA-HS-NS-NV-00 SERIAL# 685555 DATE 9405 (TCS 64 LB-IN 7.20NM 128V/KRPM 1.22 V/RAD/SEC 6.7 AMPS 3.7 OHMS) THE MOTOR SIZE IS 4 1/"2x4 1/2"x 11 1/4" WITH A 2" PULLEY 5/8" SHAFT, THE MOTOR WEIGHS 23 POUNDS. THIS MOTOR WAS PULLED FROM A UNIT THAT WAS STRIPPED FOR PARTS, IT LOOKS TO BE IN GOOD CONDITION AND COMES WITH THE TWO FEMALE MATCHING CONNECTORS.

Make sure you look at all of the pictures i posted(AS THE MAIN PHOTO WAS STOCK), The other 11 are of actual product up for bids. I have had this product for A lot of years and it has never been used. I had taken the cover off of it, so i could test it about 3 years ago.

VEEDER-ROOT RESETTABLE MECHANICAL COUNTER #JXIXU, 3-DIGITS WITH GEARED PULLEY ATTACHMENT, USED. I found this fine American-made counter about 30 years ago while cleaning out a laboratory. It had apparently been used briefly.

Features We only send 1pcs of the pulley in one package

var itemNumber = window.ebayItemID ?

Features [diameter] 20mm ; [

Features A: [diameter] 29mm ; [

Features It has about 20 Belts,Diameter 40mm Package:

The white pulley shown in the picture is just for shown and they are not included in the package. Brief Instruction Suitable to the gear and pulley shaft fixed, for 2.05 bore,including nuts; motor holes (screws longer suited

Features It has about 35 Belts,Diameter from 30mm to 80mm, there is about 30-40pcs of the Pulley Belt . Package:

Features [diameter] 15mm ; With gear: the number of teeth:

var itemNumber = window.ebayItemID ?