Buhler Permanent Magnet 24 V DC Large Hobby Motor with Pulley - 5000 RPM New motor manufactured by Buhler Nominal voltage: 24 V DC Voltage range: 3 - 24 VDC No load speed at 24 VDC: 5,000 RPM No load current: 210 mA Starting current: 12.8 A Can be operated in either direction: Simply reverse polarity of power supply Shaft dimensions: 11 mm Long x 6 mm Diameter Comes with a shaft mounted pulley: 11 mm Long x 10 mm Diameter Dimensions (not including shaft): 103 mm Long x 52 mm Diameter
3/4 HP MOTOR FROM 14" RIDGID WOOD BANDSAW This is a 3/4 HP Bandsaw Motor from 14" Ridgid Wood Bandsaw With pulley and switch 120/240 volt Non-Reversible CCW Rotation.
1/3 HP 1740 RPM 4 pole Industrial Feitsew Sewing Machine Clutch Motor Heavy cast-iron frames, 115V single phase, built-in outlet. Motor is clean and in perfect working order. Runs strong and smooth.
3 HP MOTOR FROM ACCURA 02330 WOOD SHAPER W' PULLEY This motor was taken from a machine that we sold to an Amish customer. They run their machines with belt power from a stationary diesel engine and do not need the motor. So we pull the motor, give them a discount and put the motor out there for some one who DOES need a motor.
This auction is for one 2 HP Electric Doerr Motor, Model # LR22132, RPM 3450, 12 AMPS, 230 LO Volts (can be converted to 115 volts), 1 Phase, HZ-60, FR-H56, CODE-J, DUTY-CONT, INS CLASS-BR, MAX. AMB.-40, 5/8" shaft. This motor was used very little.
CONTINENTAL 48 STATES USA SALES ONLY !! FREE SHIPPING to the USA 48 CONTINENTAL STATES ONLY!!!This used pulley wheel appears in serviceable condition and measures approx. 5 3/16" across with a 1" hole going through it.
This is a 3" Pot Metal or alloy Motor Pulley with a 1/2" diameter bore takes 1/2" wide belts. It mounts with a set screw that is inside the pulley (under the belt) . The pulley is about 5/8 " thick.
This is a 2" Pot Metal or alloy Motor Pulley with a 1/2" diameter bore takes 3/8" wide belts. It mounts with a set screw that is inside the pulley (under the belt) . The pulley is about 11/16 " thick.
This is a 3" Pot Metal or alloy Motor Pulley with a 5/8" diameter bore takes 1/2" wide belts. It mounts with a set screw and take 1/2" wide belts. It has an insert that can be inserted--the insert has a 6 sided "nut" opening 3/4" across internal.
Martin Sprocket & Gear 18H200, Bushing Bore Timing Belt Pulley, For Belt: (H), Belt Width: (2"), 18 Teeth, Cast Iron Mfr Part #: 18H200 Mfr Description: 18H200 RSB TIMING PULLEY
This item is a vintage (cast ?) steel (aluminum?) motor pulley wheel. 3/4" thick, 1/2" diameter bore hole and 5" wide. Stamped "Central Die Casting Chicago - U.S.A.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.