YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 3" FACE WERE BELT RUNS X 3/4" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.
This is a rather hard to find original drive pulley for a Pickering or other make of governor. These governors were commonly used on steam engines and some larger gas engines and tractors. It is in excellent used condition with no cracks, breaks, or repairs of any kind.
YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 3" FACE WERE BELT RUNS X 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.
UP FOR BIDS ONE CLUTCH PULLEY FOR A FAIRBANKS MORSE THROTTLE GOVERNED 3 HP Z ENGINE. No cracks/welds/braze that I can see. Very nice unmolested Fairbanks Morse Clutch Pulley for your 3 HP Z Engine.
Model Gas Engine Clutch Fully Functional!! Modeled after a Stickney clutch, can be engaged while the engine is running, the engine must be stopped to disengaged. Will accept a 5/8" diameter shaft with a 3/16" keyway, with a socket head set screw over the keyway for easy installation.
Here is a used pressed paper 5" in diameter and 5 3/4" surface pulley. The center hole is 1 1/8". It has 2 holes in the surface that looked to be drilled.
Here is a nice 5" diameter clutch pulley. I have never seen another clutch exactly like and as small as it is. I think it is in great shape and ready to use.
Here is an original clutch pulley that fits a 2-1/2hp to 12hp Hercules, Economy, or Jeager. It needs a little cleaning and such but it will make a nice pulley. The handle is loose, it spins and moves in and out but the pulley is stuck.
Here is a factory original clutch pulley for a 3hp Fairbanks Morse Z engine. This pulley bolts to the flywheel but has to slip over a crankshaft to work properly . The hole for the crankshaft is about 1-13/16" which should be standard for a 3hp FM Z.
Here is an original belt pulley that fits a 2-1/2hp to 12hp Hercules, Economy, or Jeager. There are NO cracks, breaks, or welds. Check out the pictures and see if you need it.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.