3 step pulley for sale, brand-new and used.

This is a great running old Leland electric 1/2 hp. motor... Made in Dayton, Ohio.

Product Name 10 Ton Push Puller Features and Benefits: 10 ton of pulling power Has a reach of 8 3/8", puller legs are 6 3/4" long, with a spread of 7 1/4" Removes and installs press-fit parts Can be used with several different attachments listed This tool can be used with several attachments, a bearing, or pulley puller attachment. Can be used with OTC 1123 bearing puller attachment, 679 pulley pulling attachment, 1150, 1151, 1152, 1153 internal pulling attachments.

Product Name 17-1/2 Ton Capacity Push Puller Features and Benefits: It can be used with several different attachments depending on the job Has 9-1/2" legs Maximum reach 11-1/2" with a spread of 3-1/8"-11-3/4" Screw size 1"-14 x 13-1/4" Weight 20 lbs. This push-puller gives you what you want and the tonnage capacity you need to tackle parts removal and installation on many models of cars, trucks, tractors and more.

Product Name 30 Ton Push Puller Features and Benefits: Removes and installs press-fit parts Can be used with Nos. 1126 and 1127 bearing pulling attachments or No. 680 pulley pulling attachment (two 8012 adapters are required to connect 680 to puller) Can be used with No.

Product Name Large Gear and Pulley Puller Features and Benefits: The puller will spread from 2" to 7-3/4" Block is 8-1/4" wide, and its forcing screw is 3/4" - 16 x 11-5/8" long Accommodates any cap screws up to 1/2" diameter Using this tool, you can easily remove a wide range of gears, pulleys, or other parts that have tapped holes. Length: 13.2 " Width: 3.1 " Height: 2.2 " Item Weight: 4.35 lbs Seller Terms & Conditions 1.

Product Name A/C Clutch Pulley Puller Set Features and Benefits: Two pair of jaws Spread: 3" to 5", Reach: 1" to 5" One 3/4"-16 x 5" live center forcing screw A clamp bolt 5-1/2" crossbar with 3 spread settings Weight: 4 lbs ; 11oz This is used for the removal of stubborn air conditioning clutch pulleys. Also can be used on many alternator, generator, power steering and crankshaft pulleys, harmonic balancers, and fiber timing gears.

Remember my motors are all NAME BRAND stepper motors made for heavy industry, 8 Nice Nema 17 stepper motors for your DIY RepRap, Markerbot, CNC Router AND OTHER projects.

This is a WW I vintage Monarch metal lathe that has the original four step flat belt pulley system converted to a four speed dual V-Belt Drive All unit powered by a 120V motor. The lathe comes with many accessories, including:8" 3 jaw chuck6" 3 jaw chuck8" 4 jaw chuck10" 4 jaw chuck14" faceplateSteady restSteady rest followerTwo rocker tool postsThree tool holders - one straight, one left cutting, and one right cuttingOverhead fluorescent light that attaches to the motor assembly.

<h1> BRIDGEPORT VERTICAL MILL</h1><BR> SN 73952<BR> 1 HP, STEP PULLEY<BR> WIRED 220 VOLT, 3 PHASE<BR> 9" X 42" TABLE<BR> VISE, COLLETS, HOLD DOWNS<BR> GOOD WORKING<BR> SPINDLE RUNS QUIET<BR> SKIDDING CHARGE IF APPLICABLE FOR SHIPPING...$125.00<BR> WEIGHT 2370 LBS.<BR> NO CHARGE FOR LOADING

This auction is for the large and heavy hand wheel/balance wheel for a Singer 42-5 industrial sewing machine. The diameter of this heavy pulley is 8-1/2 inches and there are two belts steps for a motor or treadle drive. The larger step is 5 inches in diameter and the smaller step is 3 inches in diameter.

1958 Walker Turner 20" Drill Press - Spindle Step Pulley , Sleeve & Bearings #11C8-3 Pulley measures 4 1/2" to 8 1/2 " * Spindle Sleeve is in excellent condition. The last pic is drill press being parted. Shipping for this item is $12.95 As always , your consideration of our items is greatly appreciated!

W