3.3 inches for sale, brand-new and used.

These were removed from a new wide format printer that was damaged in shipping. We dripped a bit of ink on them when we disassembled the printer. (see pictures) Rotating pivot joints are as new without wear.

var itemNumber = window.ebayItemID ?

YOU ARE PURCHASING A WIRE ASSEMBLY THAT IS CONSTRUCTED OF 4 CABLES (M22759/16-10) WITH AMP RING TERMINAL (AMP 12-10) ON EACH END. THE ASSEMBLY  HAS THE FOLLOWING MARKINGS ON THE BAND W106 11447ASSY K10048957-506. THESE ARE MADE TO MIL SPECS.

Black Plastic ABS Project Box Enclosure O.D. 3.26 x 2.31 x 0.8 Inches I.D. 3.07 x 2.12 x 0.61 Inches Sizes are nominal.

Perf Board 6.3 x 3.9 inches, 35 rows of interconnected pads/strips (61 holes per row) + 2 power strips. Single Sided. White Ink on reverse.

Klein Tools 1005 9-3/4-Inch Crimping and Cutting Tool for Insulated and

Emerson Electric motor Rubber Mount SEM - ? USED Metal ring on outside - Width of metal ring: 3/8 inch I.D.: 1 11/16 inches O.D.: 2 1/4 inchesI.D. of Raised Rib: 1 9/16 inches; Width of Raised Rib: 1/2 inch This is a USED rubber mount used on many Emerson Electric and Dayton motors.

Emerson Electric motor Rubber Mounts SEM - 210 - USED Metal ring on outside can be removed - Width of metal ring: 3/8 inch I.D.: 1 11/16 inches O.D.: 2 1/2 inchesI.D. of Raised Rib: 1 9/16 inches; Width of Raised Rib: 1/2 inch These are USED rubber mounts used on many Emerson Electric and Dayton motors.

1.45 Lb Natural Aluminum Heatsink Great for your Electronic Cooling needs Bottom view showing the cooling fins, and some of the Transistor Mounting Area Great for Audio Power amplifiers, Amateur Radio Power Amplifiers, Large Power supplies. This heat sink was originally used to cool a very hot processor chip, The bottom should have enough space for several tab mount package devices, just drill and tap appropriate mounting holes.

Natural Aluminum Heat sink Great for your Electronic Cooling needs Top view showing the cooling fins, and some of the Transistor Mounting holes Great for Audio Power amplifiers, Amateur Radio Power Amplifiers, Large Power supplies. This heat sink has an area on the top fins that has been milled to wiring clearance in the previous application, see above picture for this view. There are heat sink mounting holes on one edge, see the picture above on the right side.

ALTIMETER, UNITED INSTRUMENTS WITH MILLIBARS / INCHES. 5934PAD-3. SHIPPED WITH FRESH 8130, CALIBRATED TO 20,000 FEET.

New Unused Old Stock Powertronix 500VA Toroidal Transformer, with built in 110°C Thermal Switch, Part Number BB-40027-B. Made In Denmark. Has a resin filled center with a 1/4" hole drilled for mounting.

Celesco Pn PT9600-1200-111-STE-AG-626-WSR Unused Extended Range Wire Draw Transducer (1200 inches) Celesco Pn PT9600-1200-111-STE-AG-626-WSR with cable cleaning extended nose piece. 12.629 Inches per rev with 3 Hole Servo Cleat Mounting With 1.4217"(36MM) Pilot designed for multiturn absolute encoder. There is no measuring transducer with this unit.

Leadshine 2 phase stepper motor 8.5NM 6.0A 86HS85+M542-05 2 phase stepper drive M542-05

Leadshine 2phase motor 4.5NM 3.0A 86HS45+M542-05 Leadshine 2phase stepper Driver M542-05

Vintage gauge by Marshall Town.  Measures 0-15 inches of water / 0-3.5 Kilopascals.     Made in USA Model #90267 Used condition wi

var itemNumber = window.ebayItemID ?

Time Switch Amps: 40 Width: 4.7 inches Height: 8 Inches Depth: 3 inches Housing: Indoor Steel Voltage: 120V Trippers: 1 On and 1 Off Operations: Same On/Off Times each day Works perfectly with very minimal marks and use.

Set of 2 Tank Treads or Timing Belts 8.5 feet long by 2 3/8 inches wide Robotics Parts Please examine the photos and make sure it is what you want This Auction Consists of: 8 Feet 6 Inches Circumference 2 and 3/8 inches wide

CENTURY 46 Single Phase, SP, 1 Speed, CW Rotation, Open Vent, Shaft Dimension - 3/8 by 2-1/2, Motor Length - 3.5-Inch. 1/12 HP 115 Volts 2.6 Amps 1550 RPM 1 Speed 1 Phase Frame 4.3 Inches Shaft 3/8 by 2.5 inches