3/16 screw for sale, brand-new and used.

GREENLEE Model AV 322 Replacement Drive Screw forRound Radio Chassis Knockout Punches Part Number - 500 6976.4 GREENLEE Knockout Punches are for enlarging knockouts and cutting holes for conduit. This screw measures 3/8 inch in diameter and is slightly over 2 inches in length. It is the replacement drive screw for the following Model 730 Round Punches: 11/16", 3/4", 13/16", and 7/8".

GREENLEE Model 1675AV Replacement Drive Screw forRound Radio Chassis Knockout Punches Part Number - 500 4218.1 GREENLEE Knockout Punches are for enlarging knockouts and cutting holes for conduit. This screw measures 1/4 inch in diameter and is 1 3/4 inches in length. It is the replacement drive screw for the following Model 730 Round Punches: 1/2", 9/16", and 5/8".

GREENLEE Model AV 112 Replacement Drive Screw forRound Radio Chassis Knockout Punches Part Number - 500 3996.2 GREENLEE Knockout Punches are for enlarging knockouts and cutting holes for conduit. This screw measures 3/8 inch in diameter and is 2 3/8 inches in length. It is the replacement drive screw for the following Model 730 Round Punches: 15/16", 1 ", 1 1/16", 1 1/8", 1 5/32", and 1 3/16".

New, Never Been Used No.9013 Extra Large Custom Built Bushing / Bearing Seal Driver Set

var itemNumber = window.ebayItemID ?

New Snap-on 10 piece screw extractor set. These are the best I've ever used and are easy to use with the instruction card that comes in the hardened case. 1.Center punch a hole in the part if needed.

var itemNumber = window.ebayItemID ?

New Snap-on 10 piece screw extractor set. These are the best I've ever used and are easy to use with the instruction card that comes in the hardened case. 1.Center punch a hole in the part if needed.

I got this of the snap on truck and is just collecting dust. The set has never been put to use because I decided to get a bigger set after I got this one, Therefor I have no use for it, so they are like New Snap-on 10 piece screw extractor set. The set come with the instruction card that comes in the hardened case.

10M111 This Item up for Offer is a LOT OF (10) REED # 75015 REPLACEMENT PIPE CUTTER, CUTTING WHEELS FOR COPPER, ALUMINUM, BRASS, STEEL PIPE. FITS REED TC11 AND TC17. 11/16" (.667) OD X 3/16" (189) ID x 1/4" (.247) WIDE AT CENTER, HARDENED TOOL STEEL.

Up for auction is a 4 piece lot of Beryllium Tools in good condition. We have a AMPCO W-71 8" Adjustable Wrench, a Berylco W101 1/2" X 7/16" open end wrench, a Berylco B-25 shorty slotted screw driver 5" OA length X 1/4" tip and a unmarked Phillips Screw Driver 6 1/4" OA length. There are no previous owner marks.

This is an Ideal 35-404 Screw Holding ScrewDriver 3/16 Inch Diameter X 4 Inch Long Shank New. Thanks for looking!!!! Features Screw-Holding Screwdriver, 3/16 Inch Diameter x 4 Inch Long Shank Positive action when holding, starting, and setting slotted screws (#6 to #12) Vapor-blasted tip prevents plate chipping Nickel-chrome plating for corrosion resistance Tough, chrome vanadium steel shank

Klein Tools 32510 Magnetic Screwdriver with 32-Piece Tamperproof Bit Set. All tools are brand-new adn in the original factory sealed package. Sturdy bit and screw holding magnet allows for screws to fit securely in place for easy use.

The Lotoons Store Klein Tools 606-2 1/16-Inch Keystone Tip Miniature Screwdriver with 2-Inch Round