3/32 drill bit for sale, brand-new and used.

Has taper not sure what one bit appear to been reshapen hammer marks nicks on most 8) 1-1/8 1-9/32 3) 1-5/16 2) 5/31 1-3/16 Posted with eBay Mobile

Cle-Forge 1-21/32" Drill Bit 5MT, 5 Morse Taper 17-3/4" OAL ((#D78))

Cle-Forge 1-21/32" Drill Bit 5MT, 5 Morse Taper 17-3/4" OAL ((#D78))

31/32" HS TAPERED SHANK DRILL BIT STANDARD TOOL CO. 3345+. 6-1/4" DRILL LENGTH, 10-3/4" LONG OVERALL.

USED USED USED USED USED USED USED USED USED *THIS IS A GREAT DEAL. SAVE HUNDREDS BY PURCHASING USED. THESE DRILLS ARE OF SUCH HIGH QUALITY, THEY CAN EASILY BE SHARPENED AND USED FOR YEARS.

Nachi Forge 1-27/32" Drill Bit 5MT, 5 Morse Taper 17-3/4" OAL Japan ((#D96))

var itemNumber = window.ebayItemID ?

THIS IS A LOT OF THREE DRILL BITS,LARGEST IS THREE FLUTE APPROX.1.100",2ND ONE IS FOUR FLUTE 1" & LAST ONE IS FOUR FLUTE 27/32 TAPER SHANK DRILL, 11" OAL, HS, MORSE #3, Size: 27/32",1" & 1.100" Overall Length: AROUND 11" Flute Length: 7" Shank Length: 4" Shank Top Diameter: .09380" Shank Bottom Diameter: .7780" Appears to be Morse Shank #3 3 & 4 Flutes High Speed *ALL MEASUREMENTS ARE APPROXIMATE*

Melin B-2017 End Mill Drill Bit 17/32" x 5/8" 2 Flute DE Cobalt =NOS=

Atrax End Mill Drill Bit Part# 8530069 3/32x1/8 SH C/C 4 FLT S/ Carbide SEM USA! Atrax End Mill Part# 8530069 3/32" Cutting Diameter 1/8" Shank 3/8" Cutting Depth 1-1/2" Overall length 4 Flute Carbide Square Ended BRAND NEW MADE IN USA SOLID CARBIDE

this is new and in a plastic case. the case is a bit dirty-- Screw Extractor, Size #8, Drill Size 13/16 Inch, Large End Diameter 1 1/32 Inches, Small End Diameter 3/4 Inch, Taper Length 2 1/4 Inches, Overall Length 4 3/8 Inches, For Removing Pipe 3/4 Inch, For Removing Screws 1 3/8 to 1 Inchask other questions you have!! shoes are sold on consignment so i have to go by the sellers asking price.

this is new and in a plastic case. the case is a bit dirty from shelf. Item: Spiral Flute Screw Extractor Application: Removing Broken Screws, Bolts and Other Threaded Parts Type: Spiral Flute Material: Carbon Steel For Removing Studs, Bolts, Screws: 1-3/4 to 2 For Removing Pipe: 1 Size: #9 Drill Size (In.): 1-1/16 Overall Length (In.): 4-5/8 Taper Length (In.): 2-1/4 Small End Dia.

These cutters are ground to any size your valves are with a bit oversize for piston rock & valve flex. The rods fit your guide diameters as 7 m/m,8 m/m, 5/16",11/32", & 3/8" Diameters. We also have a 3/4" shank too for the mill !They spin freely with a 3/8" electric drill and fit up in the seats to start.

19/32" Resharpened Guhring Straight Shank Drill Bit. Decimal Equivelant is .593". Drill has been sharpened to 118 degrees - split point and measures approximately 6 3/4" long.

23/32" Resharpened Guhring Straight Shank Drill Bit. Decimal Equivelant is .718". Drill has been sharpened to 118 degrees - split point and measures approximately 7 3/4" long.

This 18 piece Hole Saw Set is new and sealed in the manufacturer original box. 18 piece Hole Saw Set Specifications Saw Sizes 5”, 4”, 3-1/2”, 3

BRAND NEW IN ORIGINAL PACKAGING IRWIN TAPS DIE AND EZ OUTS 7 PCS. AS FOLLOWS 2] EZ OUTS MOD EX-4 USE W/ 1/4" BIT PART NO 53404 1] EZ OUT EX-3 FOR USE W/5/32 PART NO 53403 1] TAP 8MMX1.0 USE W/ 7MM DRILL BIT PART NO. 8333 1] 10 MM -1.25 USE W/ 11/32 BIT PART NO.