3/4 in copper fittings for sale, brand-new and used.

<img src="http://ti2.auctiva.com/web/aswCredit.gif" border="0"><br

The ApolloXpress small diameter fittings feature copper-body construction for most configurations. The lead-free design offers a Leak Before Press feature. The forward lip aids in the alignment of the copper tube during insertion, reducing the risk of o-ring damage.

 

Here we have a lot of 50 new Burndy YA26-2LN short barrel 2 hole crimp lugs to fit 2/0 copper cable. These are made of solid copper and are tinned for corrosion resistance. These have the standard NEMA spacing of 1-3/4" on center for the two 1/2" bolt capacity holes.

Here we have a lot of 24 new Burndy YP4U4 Cabelok CrimpIt connectors. These are for use with both copper and aluminum wire or a combination of both. These connectors have the divider in the middle for use with dissimilar metals.

Here we have a lot of 19 new single hole soldering lugs to fit 500 MCM copper wire. These are made of solid copper and are rated at 400 amps capacity. The have a single 3/8" bolt size hole in the tang.

Here we have a lot of 115 new long barrel 2 hole crimp lugs to fit 2/0 copper cable. These are made of solid copper and are tinned for corrosion resistance. These have the standard NEMA spacing of 1-3/4" on center for the two 1/2" bolt capacity holes.

Yescom 5in1 Pex Crimper Kit 3/8" 1/2" 5/8" 3/4" 1" Crimping Plumbing Copper Ring Tool

SPRING BLOWOUT SALE!! This is an American Made Water to Air Heat Exchanger. Limited Supply!

SPRING BLOWOUT SALE!! This is an American Made Water to Air Heat Exchanger. Limited Supply!

14x10/ 56,000 BTUs / 100 PSI For use in your hot air furnace plenum. Other sizes available.

This is a long barrel copper compression lug. It is for 1/0 stranded copper and has a Nema drilled 2 hole pad (1/2" holes, 1 3/4" spacing). It is equal to a burndy YA25-2N.

This is a long barrel copper compression lug. It is for number 2 stranded copper and has a Nema drilled 2 hole pad (1/2" holes, 1 3/4" spacing). It is equal to a burndy YA2C-2N.

This is a long barrel copper compression lug. It is for number #4 copper and has 1/4" holes which are 5/8" on center. I have many other sizes available in my store.

This is a long barrel copper compression lug. It is for 2/0 stranded copper and has a Nema drilled 2 hole pad (1/2" holes, 1 3/4" spacing). It is equal to a burndy YA26-2N.