3/4 shaft for sale, brand-new and used.

?????

?????

GE Commercial Motor Shaft Diameter: 0.312" Shaft Length: 1" Motor Length With Shaft: 7" Motor Diameter Without Mount: 4" 1/4HP 115V 60Hz 3.5 amps RPM 3450 Model # 5KC19NG352T Starter cap = 17.7 mF Continuous Operation Class B Phase 1 AMB 40C CW or CCW Thermally Protected Wires: Red, Blue, Yellow, Black, White New Old Stock, This motor has never had anything on the shaft.

175 RPM Large Gearhead Motor - 12V DC - High Torque - 6mm D Shaft New gearhead motor Operates on 4 – 12 VDC 175 RPM at 12V No load current at 12V: 80mA Stall current: 1,100 mA Speed is proportional with voltage (Speed range is 55 RPM @ 4V to 175 RPM @ 12V) Very high torque output, shaft is very difficult to stop by fingers even at just 6V D-Type Shaft dimensions: 27 mm Long x 6 mm Diameter Motor dimensions (not including shaft): 84 mm Long x 4

10 X Mabuchi RS-555 PH Motors - 12V - 4500 RPM - High Torque Motors Brand new motors Manufacturer: Mabuchi Model: RS555 PH - 3255 You will receive 10 motors Operates on 12 VDC nominal No load speed: 5500 RPM No load current: .18 A Full load torque: 380 g-cm (5.3 oz-in) Rated speed: 4500 RPM Full load current: 2.4 A Stall torque: 1360 g-cm (18.9 oz-in) Stall current: 11.8 A 5 pole armature

5 X Mabuchi RS-555 PH Motors - 12V - 4500 RPM - High Torque Motors Brand new motors Manufacturer: Mabuchi Model: RS555 PH - 3255 You will receive 5 motors Operates on 12 VDC nominal No load speed: 5500 RPM No load current: .18 A Full load torque: 380 g-cm (5.3 oz-in) Rated speed: 4500 RPM Full load current: 2.4 A Stall torque: 1360 g-cm (18.9 oz-in) Stall current: 11.8 A 5 pole armature

100 X Mabuchi RS-555 PH Motors - 12V - 4500 RPM - High Torque Motors Brand new motors Manufacturer: Mabuchi Model: RS555 PH - 3255 You will receive 100 motors Operates on 12 VDC nominal No load speed: 5500 RPM No load current: .18 A Full load torque: 380 g-cm (5.3 oz-in) Rated speed: 4500 RPM Full load current: 2.4 A Stall torque: 1360 g-cm (18.9 oz-in) Stall current: 11.8 A 5 pole armature

?????

Geared Dc motor

Buhler Permanent Magnet 24 V DC Large Hobby Motor with Pulley - 5000 RPM New motor manufactured by Buhler Nominal voltage: 24 V DC Voltage range: 3 - 24 VDC No load speed at 24 VDC: 5,000 RPM No load current: 210 mA Starting current: 12.8 A Can be operated in either direction: Simply reverse polarity of power supply Shaft dimensions: 11 mm Long x 6 mm Diameter Comes with a shaft mounted pulley: 11 mm Long x 10 mm Diameter Dimensions (not including shaft): 103 mm Long x 52 mm Diameter

? Welcome

Motenergy ME1004 PMDC Motor, 24-48V, 10.75 hp cont, 21 hp pk This is a Permanent Magnet, Brush Type, DC Motor with Neodymium Iron Boron Magnets. The 1" shaft is similar to the shaft on most Lawn and Garden Tractor engines. This motor is perfect for an engine replacement on a Lawn and Garden tractor when converting the

Motenergy ME1003 PMDC Motor, 12-72V, 15.4 hp cont, 30.8 hp pk The ME1003 is a brush-type, permanent magnet DC motor with very high efficiency. Capable of 11.5 KW continuous and 23 KW for 1 minute. For voltages from 12 to 72 VDC input and 200 amps continuous (400 amps for 1 minute).

This is a brand new, in the crate 25HP, 900 RPM, 326T, 230/460V, 3 phase electric motor with full factory warranty. It is a premium motor with a nice array of bells and whistles that you wont find on lower cost motors. We also offer VFDs, pumping unit design D motors, softstarts and more.

This 15hp mixer motor and shaft is in good operating condition and ready to work. It is a type AEU8B and bears S/N: AM6110090003. Operates on 230/460V 3ph and draws 34.6 and 17.3 amps respectively.

This 15hp mixer motor and shaft is in good operating condition and ready to work. It is a type AEU8B and bears S/N: AM6110090003. Operates on 230/460V 3ph and draws 34.6 and 17.3 amps respectively.

[ Dayton 15 HP, 1765 RPM, 3 Phase General Purpose Motor

Siemens 1LA03244FC21 Motor 1765 RPM 40 Hp 3 Phase Siemens Cat. 1LA03244FC21 Frame 324T Hp 40 Phase 3 RPM 1765

var itemNumber = window.ebayItemID ?