3/4 threaded rod for sale, brand-new and used.

This is for a Large 316 Stainless Steel 1-3/4"-5 Threaded Rod x 19" Long with Nuts & Washers. The rod is threaded about 4-1/2" on each end with a flat washer and a nut on them. I have More stuff Similar to this so Don't for get to check out my eBay Store For More Unbelievable Great Deals!!!

40 Pk Steel Zinc Plated 1/4" 20 TPI Hexagonal Threaded Rod Coupler Nut N182667 Coupler

20 Pk Steel Zinc Plated 1/4" 20 TPI Hexagonal Threaded Rod Coupler Nut N182667 Coupler

Simpson Strong Tie DIA50 Simpson Strong-Tie Carbon Steel Drop-In Anchor 1/2-inch Rod 2-inch body 50 per Box Product Features

Simpson Strong Tie DIA37 Simpson Strong-Tie Carbon Steel Drop-In Anchor 3/8-inch Rod 1-1/2-inch body 50 per Box Product Features

55 TON 6" STROKE SPX POWER TEAM C556C SA HYDRAULIC CYLINDER 9-8004-55-6 SINGLE ACTING 55 TON 6" STROKE HYDRAULIC CYLINDER Brand new,

Simpson Strong Tie THD50934RC 1/2-Inch by 9-3/4-Inch Titen HD Rod Coupler for Concrete/Masonry, 20 per Pack Brand new, opened box Product Description The Titen HD Rod Coupler is designed to be used in conjunction with a single or multi-story tie-down system. This anchor

(68) SAMMYS ROD ANCHOR SDWNDR Sidewinder 8056957 ELCO HANGERMATE - Fastens 3/8" Rod to Metal Hanger Screw 1 1/4"L - NEW OPEN BOX You will get a total Anchors as noted above Shipped Bulk to save you $$ on shipping New, Sammys, Elco or similar quality Sammy Part # 8056957 hex nuts not included Get a Great Deal! Thanks! SPECIFICATIONAnchors shall be used for suspended

SOLD AS LOT OF (50) PIECES ***These are HEAVY DUTY rod couplers. Thickness = 3/4" DESCRIPTION: ROD COUPLERS, ROD CONNECTORS, SPACER NUTS, LONG NUTS, ADAPTER NUTS MATERIAL: Stainless Steel (Type 316) SIZE: Fits 1/2" rod Overall Length: 1-1/4"

This is an Auction for a new Parker Series MPRM Flange Mount Rod locking Pneumatic Cylinder, Part# 32 CJMPRMR14MC 70.00. The Series MPRL incorporates a powerful piston – rod locking device, which clamps the piston rod and locks it in position. The locking device is of the air/spring activated type and is integrated into the front (head) cover of the cylinder.

SOLD AS LOT OF (5) PIECES DESCRIPTION: ROD COUPLERS, ROD CONNECTORS, SPACER NUTS, LONG NUTS, ADAPTER NUTS MATERIAL: Stainless Steel (Type 316) SIZE: Fits 3/4" rod Overall Length: 2" Thickness: 1" Also known as extension

This auction is for (1) Used 9' Ball Screw, All Thread, Acme Threaded Rod, Linear Actuator with Keyed Shaft. Dimensions: 9' x 2" Shaft overall, 8' of threads, 1" keyed shaft, 7" x 4" slide bearing, 8" x 8" x 5" rotor bearing base, and approximately 3 3/8" shaft height on center. I have three of these 9' threaded shafts with actuators and I have three extra threaded shafts without actuators.

Various Thorlabs Optical Test Equipment accessories for use on your breadboard test setups: Qty. 1 KCB05Right-Angle Kinematic Mirror Mount, 16 mm Cage System and SM05 Compatible Retails for $151.20 From Thorlabs:

Lot of (25) threaded rods. These 307A grade zinc plated rods are 5/16-18 thread and are 36" long. Item weight: 22 Lbs.

YOU ARE BIDDING ON 1 BRAND NEW Dayton 2YU70 Unit Heater 34100 BTUh IT IS BRAND NEW AND WAS NEVER IN SERVICE. The only reason I do not have the original box is that it would not fit in my car with it. IT HAS A FEW SCRAPES ON THE CASE AND A FEW OF THE SIDE AND TOP FINS ARE BENT WHICH I DID WHILE MOVING IT.

Double-Acting push/pull hydraulic Threaded-Body Cylinder with plunger head Bolt Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the work piece surface irregularities,also deflection and vibration under machining loads.&nb