3/8 bushings for sale, brand-new and used.

Speed Systems CT-1 Chamfering Tool for Underground Cable Wire Strippers The CT-1 Chamfering Tool cut a 45 degree bevel on the insulation of cables with an O.D. of 1/2" to 1-3/8" Features Chamfers cable end at 45 degrees For use on .175" to .345" insulation (15kV thru 35kV)

include("http://

Lot of New Bushings, Fittings, Couplings, Valves, Pressure Switches, and More Tiffin Parts, LLC is a manufacturer and supplier of high quality replacement parts to equipment customers worldwide. These parts are excess inventory originally for a Dynamic Brush Tree Chipper. Some the parts can be seen in the photos.

Cact-Co Model A1 Cartridge Actuated Cable Cutter

You are bidding on a new freight damaged CARRIER 4 TON WATER SOURCE GEOTHERMAL HEAT PUMP #50PCH048, 208/230V 3 PH. This heat pump was damaged in shipping. Though I have no way to apply pressure and 100% assure it has no leaks from visual inspection it looks like it should.

Thank You For Looking At Our Products Product Information:Very Nice Complete Set of duMont "Minute Man" Keyway BroachesManufactured in Greenfield, MAMade in USAStandard Set No. 10-10A w/ Plain BushingsModel EDP11119 Product Features & Specifications:

THIS MACHINE IS NOT COMPLETE REFRIGERATION,ELECTRONICS AND MOTORS ARE IN WORKING CONDITION BUYER PAYS ANY SHIPPING CHARGES IT NEEDS: 2) DRIP TRAYS 1) HANDL

UP FOR SALE GAS VALVE , HERE ARE THE SPECS : BtuH Capacity70,000 Valve Type Standard Opening Coil Volts 750mV Gas Type NG/LP Inlet Size 1/2" Outlet Size1/2" Side Taps Yes Inlet Pressure Tap Yes Reducer Bushing Kit (2) 1/2 X 3/8"

CONDITION = NEW WIRE WHEEL MANUFACTURER = ANDERSON {USA} WIRE IS STAINLESS {302 IS MARKED ON HUB} WIRE WHEEL DIAMETER = 3" WIRE WHEEL WIDTH = 1/2" WIRE THICKNESS = .005" {COPPER} ARBOR HOLE = 5/8" {2 BUSHINGS INCLUDED WILL GO TO 1/2" THEN 1/4"} WIRE STYLE = CRIMPED MAXIMUM RPM = 20,000

Solid cast iron balanced wheel pulleys used for making portable band saw band wheels. You'll need two 18.75 "pulleys, two 59" belts and two split taper bushings to complete the 19" band wheels. You'll also need keyed shaft, drive pulleys and pillow block bearings.