Lot of NEW RITE HITE JAMES MORTON Self-Positioning Hold-Down Clamps Hopkins Manufacturing Company With Job Tray Clamps appear new unused with some storage age. Some paint chipping and surface rust. 2 Hold down bolts appear to have been used but only a few times.
Over 100 Pieces Step Block & Fixturing Clamp Set Machinist Hold Down 2 Sizes … Selling as seen. There are around 90 Pieces that are metal and the two boxes full of pieces that are wood. One is manufactured by the Northwestern Tool & Eng.
This is a heavy duty clamp for use on a milling machine table. It is missing the wedge but comes with mounting bolt and tee nut. The main body is 5 1/4" tall and has a capacity of 3".
This is a Brown&Sharpe #9 taper shell mill holder for use with 1" bore shell mills. Overall length is 7" and has a 5/16" key and has a 3/8" threaded hole for a draw bar. The cutter shank is 1 5/8" wide.
1-used metal lathe face plate. 8-1/2" in diameter, 11/16" thick with a 1-3/8" threaded center with 8 threads per inch (TPI) There are 4 oblong holes that extend completely through the plate and that are centered around the center hole and the long axis of the holes radiate from about 1-3/4" from the center to 3-3/4' from the center. They are 1 - 15/16" long by 1/2" wide.
Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.
RIGHT ANGLE PLATE FOR MACHINIST ROTARY TABLE 2-5/8" DIA THRU HOLE & (4) 5/16 BOLT HOLES ON FACE (2) 5/16 BOLT HOLES AND (2) .530 X 1" SLOTS ON BASE IN GOOD CONDITION OVERALL DIMENSIONS: 7-3/8" W X 6-7/8" D X 9" H APPROXIMATE SHIPPING WEIGHT: 25 LBS WE SHIP UPS OR USPS FLAT RATE WHEN AVAILABLE
YOU ARE BIDDING FOR ONE MASKING PLATE, FITS MOST 8" SUPER SPACERS, 6-13/16 OD, 3-1/4" ID, 2 bolt holes 4-1/2" apart. I have 2,2,2,3,3,4,4,4,8,8 and 12 notch plates remaining YOU ARE BIDDING FOR ONE PLATE 012-08-04-19/040 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect
You are bidding on 2 pieces of a 5/8-11 x 7 1/2 inch T slot bolt which are new. They are Gibraltar Products #842680-G. Please pay within 3 days of the end of the auction.
This is a newly machined 47/37 transposing gear set which converts your 8 TPI lead screw to a 2.5 mm pitch. The thread’s crest-to-crest or lead error is only 0.02% or about 0.0025 inch for a one-foot long threaded rod. The transposing gears are under 3 inches in diameter leaving lots of room for closing the gear cover.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
