3/8 i bolt for sale, brand-new and used.

You are buying a new Nupla Soft Face Hammer. Model # SP-205. NSN 5129-00-903-8553.

You are buying a lightly used Nupla 3 Lb Driving Hammer. Cross Pein head is 5 inches long. With 15 inch fiberglass handle in excellent condition.

FOR YOUR CONSIDERATION IS A BENCH MOUNT BOLT CUTTER, I DO NOT KNOW IF IT WAS MADE BY RIDGID BUT THE RATCHET AND HANDLE ARE A RIDGID MODEL 00-R. THIS CUTTER OPENS UP TO ABOUT 3/8", I DO NOT KNOW WHAT IT WAS DESIGNED TO BE USED FOR, HOWEVER I WAS TOLD IT WAS USED TO CUT CHAIN LINKS IN A HARDWARE STORE. THIS CUTTER IS USED AND IN EXCELLENT CONDITION.

THIS LISTING IS FOR PORTER CABLE, ROCKWELL OR DELTA PARTS. ALL OF MY PARTS ARE NEW OLD STOCK. A FEW SUCH AS ARMATURES AND FIELD WINDINGS ARE IN FACTORY PACKAGING.

Description Greenlee 2 1/2 inch conduit punch as pictured. It punches a hole approximately 2 7/8 inches in diameter. The punch and the die are both in very good working condition.

ENERPAC RC04 RC 04 HYDRAULIC RAM / CYLINDER, 12" STROKE, 2" BORE, 1500PSI - USED

ENERPAC P39 P 39 HYDRAULIC HAND PUMP, 10000PSI

164-Here is a good used Greenlee knockout punch set, 500-4062 and 500-4063. For 2 inch conduit or a 2 7/16 inch diameter hole. Needs a 3/4" draw bolt or a hydraulic pump setup.

These Knockouts have never been used. Been in Tool Box for some time. Sizes Are 1-19mm, 1-2", 1-1 1/2", 1-38.1mm, 1-1", 1-1 7/32", 1-3/4", 1-1/2", A total of 8 all togather.I Ship In The United States Only.

Greenlee 2 " Conduit Knockout Punch Cutter cut size 2 3/8" great shapeno bolt with this oneI have other sizes listed Check out my other

New Snap-on 10 piece screw extractor set. These are the best I've ever used and are easy to use with the instruction card that comes in the hardened case. 1.Center punch a hole in the part if needed.

New Snap-on 10 piece screw extractor set. These are the best I've ever used and are easy to use with the instruction card that comes in the hardened case. 1.Center punch a hole in the part if needed.

Blackhawk 3/4"Drive Shallow Chrome 12 Point Sockets!!! These sockets are new, never been on a ratchet!!!! Never been on a bolt!!

Up for sale is a set of Allen Ball End T handle Drivers. Needless to say I keep a couple sets for my own use. I don't know how I used to get by without them.

Here we have a AT350 impact wrench by blue Point. Blue point is a division of Snap on. This impact is very strong with a bolt breakaway torque far exceeding 200 ft pounds.

NEW, UN-USED. YOU ARE BIDDING ON 2 SOCKETS. 1- F161, 1/2", 12 POINT, 3/8 DRIVE , SHALLOW , CHROME.

NEW UN-USED, 3/4", SNAP ON , FS241 , 6-POINT , 3/8 DRIVE , SHALLOW , CHROME. NEVER BEEN ON A RATCHET. NEVER SEEN A BOLT.

Gator Grip - One Socket That Does The Work Of a Whole Set! Self Adjusting Universal socket. Fits Both Standard and Metric Fasteners.

You are buying a set of Klein Tools 1000 Volt Insulated Wire Strippers. These are the real deal required to work safely under NFPA 70E These are Ex-Military. Klein Cat # 11045-INS These are designed to cut/strip #18 thru #10 gauge wire These are used a little dirty and minor rusts spots that will come right off with a wire brush.

You are buying a set of Klein Cable Cutters These are Ex-Military. An 8" length means they're easy to carry. High leverage design for quick cuts through copper or aluminum.