3/8 id 5/8 od bushing for sale, brand-new and used.

BT# 2899 You are looking for: GRAPHITE BUSHING WITH STEEL FIXTURE CYLINDRICAL GUIDE NEW ITEM, WITHOUT O

BT#: 2899 M07E2-035.2W You are looking for: GRAPHITE BUSHING WITH STEEL FIXTURE CYLINDRICAL GUIDE

2mm drill bushings price each, 24 available, message me and we can work out what you need, ready to deal. Guide drill bits with these metric bushings, also known as "PM" bushings. They permanently mount flush with jig

This is a Quick-Grip Screw-Clamp Saw / Sprocket Arbor Adapter used to fasten a saw blade or sprocket with a 1-3/8" bore onto a 1/2" diameter shaft. Here's how it works:1) Remove the clamping nut2) Slide the adapter into position on the 1/2" shaft3) Place the saw blade or sprocket (up to 1/4" thick) with a 1-3/8" bore onto the adapter4) Replace the clamping nut and tighten to secure onto the shaft This only takes a minute and you are ready to go! The nut is 1-5/8" across the flats and abou

YOU ARE BIDDING ON 8 (3/4"INSIDE DIAMETER) SERRATED PRESS FIT BUSHINGS WITH AN OUTSIDE DIAMETER OF 1". TOTAL LENGTH IS 1" WITH 1/2" DEDICATED TO SERRATIONS. TOLERANCES ARE LESS THAN .001".

1/2 OD x 3/8 ID x 1" L Oil Impregnated Sintered Bronze Flange Sleeve Bearing Bushing .502 (1/2") O.D. / .373 (3/8") I.D. 1.007 (1") Total Length .621 (5/8") Flange Dia.

07 4000034384 11C This item is surplus stock in like new condition. Please email any questions or requests for additional pictures before purchasing. OD: 7/8" ID: 13/16" Length: 9/16" Rubber Center OD: 3/4" ID: 3/8" OAL: 5/16" International buyers – please note: import duties, taxes and charges are not included in the item price or shipping charges.

L-11A-1114-bshed NOTICE TO BUYERS - if there are any delays in delivery - or any other problems - PLEASE - BEFORE opening a case, email or call us at 320-766-6888. We can usually remedy the situation immediately. ALSO if your shipping address is different than your registered PayPal address - be sure to contact us.

12A201 up for sale is a large hardened drill bushing from a vintage machine shop this is marked 3 drill 62885 this unit measures 5 inch major OD at the flange the flange is 0.65 wide the OAL is 3.64 long the ID is 3 inch for a 3 inch drill the press in diameter is 4.248 OD the top flange has the traditional locking notch to hold it into the plate, we marked this used but this appears unused from USA surplus, the ID looks clean the OD and outer surfaces have a bit of surface rust.