3/8 threaded rod for sale, brand-new and used.

You're bidding on: - New DAYTON UNIT/GARAGE HEATER 2YU62 5kW ELECTRIC 208V 240V 17000/12600 BTU 1PH/3PH 350cfm - Pictures shown are of the actual unit you'll receive and show EVERYTHING that you'll receive. Basic Specifications from the Manufacturer (taken from the manufacturer's site specs and while deemed correct, buyer should verify these specifications for buyer's application before purchase): kW: 5.0/3.7

VLIER CY1254-25 Power Clamping Cylinder. 1/8" NPT Inlet 3/8 NC Threaded Hollow Clamping Rod 1/4" NC Mounting holes 1/4" Stroke Spring Return Unused still in box with parts list. (Replaces CY1253-25) Like Enerpac

YOU ARE BUYING A : LION WELDED HYDRAULIC CYLINDER MODEL # 644808 20WH08-112 ASAE 3000 PSI 2" BORE / 8" STOKE Double-acting, double-ported welded tie rods are perfect for industrial, agricultural and contractor applications. Features chrome rod, crown piston seals with wear ring, hallite rod seals, double lug base end, threaded rod end with ductile rod clevis and 3/4-16 ORB (SAE 8) ports inline with pins. 1in pin hole size.

Used Power Team 10 ton ram. C1010C Power Team model number, 10-1/8" stroke. 13-3/4 retracted height, 23-7/8 extended height.

BVA Model No. HDG 20012 cylinders have been mounted, which scuffed the paint, but these were never hooked up or operated. Maximum working pressure: 10,000 psi / 700 bar Double Action: 202 Tons Push Capacity, 98 Tons Pull Capacity

YELLOW SIMPLEX 30 TON ,8 1/4 STROKE, SINGLE ACTION SPRING RETURN, 15 3/8 TALL. TUBE THREADED 3.3 IN 12 THREAD. ROD INSIDE THREAD 1 1/2 12 THREAD,THIS JACK WORKS GOOD, I PRESSURE TESTED IT TO 10,000 LBS.

BIMBA MRS-041-DXDE AIR CYLINDER In Original Packaging 1" Stroke, Double Acting, Double End, 1/8" NPT Threaded Ports, 304 Stainless Steel Body, Anodized Aluminum End Plates, 1/2"-20 Mounting Threads at Both Ends, 5/16" diameter Stainless Piston Rod with 1/4"-28 Threaded Ends, Length Dimensions Available @

BIMBA FLAT 1 AIR CYLINDER FO-040.125 1/8" Stroke, Double Acting, Single End, 10-32 Threaded Ports, 304 Stainless Steel Body, Anodized Aluminum End Plates, Counterbored Mounting Holes at Both Ends, 5/16" diameter Stainless Piston Rod, Exact Dimensions Available @

40m bore and 20mm stroke, 1.0Mpa press, double Action and Single Rod. Cylinder is a mechanical devices which utilize the power of compressed gas to produce a force in a reciprocating linear motion.

ARO 2" STROKE STAINLESS AIR CYLINDERS 2418-5089-020 You are bidding on a Stainless Steel piston rod Double Acting Pneumatic Air Cylinders, No. 2418-5089-020 with 2 inches of stroke and a 1 1/8" bore, piston measures 3/8" diameter. Economair round cylinders are medium to heavy-duty units that can be installed anywhere that a repairable cylinder is desired.

NEW BIMBA 2" STROKE DOUBLE WALL AIR CYLINDER 2" BORE DW-312-2 This is a Brand New Pneumatic Bimba Double Acting Double Wall with 2 inches of stroke 5/8" piston threaded on the end, Model DW-312-2. FEATURES Tie Tube: Epoxy coated Aluminum Cylinder Body: Smooth 304 stainless steel Piston Rod: Hard Chrome Plated Pressure Rating: 200 psi Life: 1400 miles of travel when lubricated For more information see: http://www.bimba.com/Global/Library/Catalogs/Bimba%20Catalogs/FL_DoubleWallRSS.p

UP TO 6 NEW BIMBA 1" STAINLESS AIR CYLINDERS 041-DB W/BUMPERS This is an Auction for up to 6 Brand New Pneumatic Bimba Front Nose Mounting Double Acting Air Cylinders with Bumpers, Model # 041-DB with 1 inch of stroke and a 1/4"(.250) piston threaded on the end. Each bid is for ONE Cylinder. Cylinder measures .8" Diameter and has 3/4" Bore.

(4) DUAL ROLLER ASSEMBLIES Overhead Conveyors & Rail Sliding Systems Used and in very good condition. Dual Roller Assemblies. Industrial grade.

Sale includes (24) hangers for pipe, tubing, conduit, etc with an outside diameter of 3/4" or less. These hangers are good quality, plated and lined with a felt cushion pad. The hanger pulls apart for installation and is held together with a top fitting that is tapped for 3/8" threaded rod.

LIN - ACT AIR/HYDRAULIC CYLINDER 3/4 X 2 NEW OLD STOCK 3/4 BORE X 2" STROKE CYLINDER 1/8" NPTE PORTS, THREADED ROD END

5/8" X 72" SPLIT TUBE THREADED ROD PROTECTORS 5 IN LOT PART NUMBER: SPT6272

This sale is for a total of 52 pcs. They all have a 3/8" threaded button. They have UL and FM approvals.

This sale is for a total of 100 pcs. They all have a 3/8" threaded button. They have UL and FM approvals.

UNIMAT SL DB Lathe Accessory Connects a standard Jacobs drill chuck to UNIMAT tailstock M12-