32 awg for sale, brand-new and used.

2724XC1E.27 New Cooper/ Bussmann Magnum 8-Position, 1-Row Barrier Blocks, Strips Screw Terminals, Part Number A20220807. Each bid quantity is for a Lot of Four (4) Pieces. You may bid / buy any number of lots, up to the total quantity available above.

Description DIN Rail Mount 2

Description DIN Rail Mount

Description DIN Rail Mount 8

Description DIN Rail Mount

CODE: CHCC1D Condition: NEW Manufacturer: Bussmann Technical Specs ItemFuse Holder FUSES NOT INCLUDED Max. Voltage600 Amps AC30 Number of Poles1 Connector TypeBox Mounting StyleDIN Rail Fuse Block DesignTouch Safe Fuse Length1-1/2" Fuse Dia.13/32" Wire Size18 to 8 Cu Length3.18" Width0.69" Depth2.26" Blown Fuse IndicatorNo For Use WithKTK-R, FNQ-R, LP-CC Fuses Fuse Holder CodeW StandardsUL Series: CHCC 200.000 AMP RMS SYM Rating &nbs

LPF-03 4S LC Power Filter Recommended by Team BlackSheep, getFPV and ReadyMadeRC! Technical and installation diagrams, check ivc.no/lpf This is a compact and effective LC filter designed to clean a "dirty" DC power supply for sensitive FPV- and RC-components. The filter has excellent properties to reduce the effect of interference radiated through the air and noise conducted via the power wires.

LPF-01 LC Power Filter Recommended by Team BlackSheep, getFPV and ReadyMadeRC! Technical and installation diagrams, check ivc.no/lpf This is a compact and effective LC filter designed to clean a "dirty" DC power supply for sensitive FPV- and RC-components. The filter has excellent properties to reduce the effect of interference radiated through the air and noise conducted via the power wires.

var itemNumber = window.ebayItemID ? window.ebayItemID : -1; function passpara(){return '&id=1316613&itembgcolor=0xFFFFFF&bordercolor=0x000006&storewindowbgcolor=0xf1f1f1&toptextcol

var itemNumber = window.ebayItemID ? window.ebayItemID : -1; function passpara(){return '&id=1316613&itembgcolor=0xFFFFFF&bordercolor=0x000006&storewindowbgcolor=0xf1f1f1&toptextcol

New, unused: Transformer assembly. Cup cores made of Philips 3C81 ferrite. specs: http://www.thierry-lequeu.fr/data/3C81.pdf Core has 550 turns 32 AWG magnet wire.

The items are USED and sold AS-IS, but were removed from service in a working condition. Below are the detail from the manufacturers page and I believe all products are current. Stepper Motor The HT34-490 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications.

Module, Output, 2 Channel, Relay 2 NO / Potential Free, AC 230 V, DC 30 V, Wago Wago #750-513 The WAGO I/O SYSTEM 750 SYSTEM DESCRIPTION The WAGO I/O SYSTEM 750 is a modular, fieldbus independent I/O system. It is comprised of a fieldbus coupler/controller and connected fieldbus modules for any type of signal. Together, these make up the fieldbus node.

Module, Output, Analog, 2-Channel, 0-10V, DeviceNet Fieldbus, Wago I/O System 750 Wago #750-550 The WAGO I/O SYSTEM 750 SYSTEM DESCRIPTION The WAGO I/O SYSTEM 750 is a modular, fieldbus independent I/O system. It is comprised of a fieldbus coupler/controller and connected fieldbus modules for any type of signal. Together, these make up the fieldbus node.

Module, Input, Analog, 2-Channel, ±10V Differential Inputs, DeviceNet Fieldbus, Wago I/O System 750 Wago #750-456 The WAGO I/O SYSTEM 750 SYSTEM DESCRIPTION The WAGO I/O SYSTEM 750 is a modular, fieldbus independent I/O system. It is comprised of a fieldbus coupler/controller and connected fieldbus modules for any type of signal. Together, these make up the fieldbus node.

For sale is a Brand:: Phoenix Contact Model: FLKM40-LNC Specs: Type: VARIOFACE module with screw connection and flat-ribbon cable plug connector, for mounting on NS 32 or NS 35/7.5, with pin strip and short and long locking latches for socket strips, 40-pos. Circuits: 40 Connection 1: (40) 12-24 AWG wire Connection 2: Flat-ribbon cable plug connector in acc.