+ Post new Ad
32" x 33"h Giddings & Lewis Cast Iron Angle Plate, US $2,950.00 – Picture 0
32" x 33"h Giddings & Lewis Cast Iron Angle Plate, US $2,950.00 – Picture 1
32" x 33"h Giddings & Lewis Cast Iron Angle Plate, US $2,950.00 – Picture 2
32" x 33"h Giddings & Lewis Cast Iron Angle Plate, US $2,950.00 – Picture 3
32" x 33"h Giddings & Lewis Cast Iron Angle Plate, US $2,950.00 – Picture 0
32" x 33"h Giddings & Lewis Cast Iron Angle Plate, US $2,950.00 – Picture 1
32" x 33"h Giddings & Lewis Cast Iron Angle Plate, US $2,950.00 – Picture 2
32" x 33"h Giddings & Lewis Cast Iron Angle Plate, US $2,950.00 – Picture 3

32" X 33"h Giddings & Lewis Cast Iron Angle Plate

US $2,950.00

  • Chicopee, Massachusetts, United States
  • Jan 30th
Open on mobile:
QR code
 (LIKE NEW) G & L CAST IRON ANGLE PLATE SPECIFICATIONS: FACE:                32” W X 33” H T SLOTTED FACE:        (5) 3/4 ” T SLOTS LOCATING SLOT:         1/2 ” SLOT DOWN THE MIDDLE OF THE FACE CLAMPING BOLTS:    (4) 1/2 ” TAPPED HOLES DOWN EACH SIDE BASE DIMENSIONS:    32” W X 22” DEEP WITH (3) HOLES ON EACH SIDE APPROXIMATE WEIGHT:    1500 LBS.  F.O.B. SPRINGFIELD, MA
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “This angle plate appears to have never been used and is in extremely nice condition.”

Directions

Similar products from Fittings & Plates

Surface Plate by Brown and Sharpe In Very Good Condition

Surface Plate by Brown and Sharpe In Very Good Condition

  • Dalton, Georgia, United States
  • Jan 30th
Surface Plate In Very Good Condition

Surface Plate In Very Good Condition

  • Dalton, Georgia, United States
  • Jan 30th
Plasma CAM grate grid slats CNC plasma cutter SAVE $$$$ AccuFast2D 101814 GTC

Plasma CAM grate grid slats CNC plasma cutter SAVE $$$$ AccuFast2D 101814 GTC

  • Shelbyville, Tennessee, United States
  • Jan 30th
Aluminium Vacuum table 260 x260mm w/ ON-OFF & Adjust Switch (#960)

Aluminium Vacuum table 260 x260mm w/ ON-OFF & Adjust Switch (#960)

  • Taipe, Taiwan
  • Jan 30th
7" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-3/8"-5 THREADED MOUNT

7" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-3/8"-5 THREADED MOUNT

  • Chino, California, United States
  • Jan 30th
6-1/2" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-1/4"-8 THREADED MOUNT

6-1/2" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-1/4"-8 THREADED MOUNT

  • Chino, California, United States
  • Jan 30th
8" SLOTTED MOUNTING FACE PLATE FOR LATHE W/ 2-1/4"-8 THREADED MOUNT

8" SLOTTED MOUNTING FACE PLATE FOR LATHE W/ 2-1/4"-8 THREADED MOUNT

  • Chino, California, United States
  • Jan 30th
9" HARDINGE C27 MOUNTING FIXTURE FACE PLATE FOR LATHE W/ TAPER LOCK MOUNT

9" HARDINGE C27 MOUNTING FIXTURE FACE PLATE FOR LATHE W/ TAPER LOCK MOUNT

  • Chino, California, United States
  • Jan 30th
12-3/4" FACE PLATE FACEPLATE 1-11/16"-9 THREAD MOUNT FOR LATHE

12-3/4" FACE PLATE FACEPLATE 1-11/16"-9 THREAD MOUNT FOR LATHE

  • Chino, California, United States
  • Jan 30th
EXCELLENT!! 12" LATHE CHUCK MOUNTING BACK PLATE W/ D1-8 MOUNT

EXCELLENT!! 12" LATHE CHUCK MOUNTING BACK PLATE W/ D1-8 MOUNT

  • Chino, California, United States
  • Jan 30th
ISEL Stop Bar, Set of two, #290021 0175

ISEL Stop Bar, Set of two, #290021 0175

  • Claremont, California, United States
  • Jan 30th
Lathe Drive or Face Plate 6 inch diameter 1 1/2 T.P.I.

Lathe Drive or Face Plate 6 inch diameter 1 1/2 T.P.I.

  • Braintree, Massachusetts, United States
  • Jan 30th
11" LATHE DOG DRIVE MOUNTING FACE PLATE W/ L-TYPE 5-1/2"-6 THREAD MOUNT

11" LATHE DOG DRIVE MOUNTING FACE PLATE W/ L-TYPE 5-1/2"-6 THREAD MOUNT

  • Chino, California, United States
  • Jan 30th
V-BED TOOL FIXTURE / RISER 10-1/2" x 4" x 3-3/8"

V-BED TOOL FIXTURE / RISER 10-1/2" x 4" x 3-3/8"

  • Chino, California, United States
  • Jan 30th
MACHINIST LATHE MILL NICE Ralmikes Sine Bar Plate Fixture

MACHINIST LATHE MILL NICE Ralmikes Sine Bar Plate Fixture

  • Morris Plains, New Jersey, United States
  • Jan 30th
Suburban Tools CM-5C Collet-Master Spin Index Fixture, 1-1/4" Thru Hole, 5C (6B)

Suburban Tools CM-5C Collet-Master Spin Index Fixture, 1-1/4" Thru Hole, 5C (6B)

  • Saint Louis, Missouri, United States
  • Jan 30th
6" CHUCK PLATE FOR BUCK, NORTHFIELD, BISON AND MORE 2 3/4 - 10 MOUNT

6" CHUCK PLATE FOR BUCK, NORTHFIELD, BISON AND MORE 2 3/4 - 10 MOUNT

  • Cedar, Minnesota, United States
  • Jan 30th
Tilting Box Table for Radial Drill (Inv.31683)

Tilting Box Table for Radial Drill (Inv.31683)

  • Portland, Connecticut, United States
  • Jan 30th
Pratt & Whitney 4E Work Riser (1) Only (Inv.31684, 31685)

Pratt & Whitney 4E Work Riser (1) Only (Inv.31684, 31685)

  • Portland, Connecticut, United States
  • Jan 30th
14-1/2" FACE PLATE FACEPLATE MOUNT FOR LATHE W/ L0 MOUNT

14-1/2" FACE PLATE FACEPLATE MOUNT FOR LATHE W/ L0 MOUNT

  • San Diego, California, United States
  • Jan 30th

People who viewed this item also vieved

SCHAUBLIN 162-40300 PAIR MILLING COLLETS CAM CUTTER

SCHAUBLIN 162-40300 PAIR MILLING COLLETS CAM CUTTER

  • Unadilla, New York, United States
  • May 28th
12 Piece Lot Of Various Collets

12 Piece Lot Of Various Collets

  • Bristol, Connecticut, United States
  • May 28th
HARDINGE Extended Nose HEXAGON 20C Collet, Used - Excellent, TD000280

HARDINGE Extended Nose HEXAGON 20C Collet, Used - Excellent, TD000280

  • Greenlawn, New York, United States
  • May 28th
Vintage Hargrave Cincinnati Tool Co.No.44 2-Inch Welder/Mechanic C-Clamp/clamp

Vintage Hargrave Cincinnati Tool Co.No.44 2-Inch Welder/Mechanic C-Clamp/clamp

  • Punta Gorda, Florida, United States
  • May 29th
Antique Hargrave Cincinnati tool.Co C-Clamp Super Clamp No.44 3" pat.1918469

Antique Hargrave Cincinnati tool.Co C-Clamp Super Clamp No.44 3" pat.1918469

  • Punta Gorda, Florida, United States
  • May 29th
1 Ton Of Hold Down Clamps T Nuts Studs Etc.

1 Ton Of Hold Down Clamps T Nuts Studs Etc.

  • Piedmont, South Carolina, United States
  • May 30th
UNIVERSAL TRANSFER PUNCH & ALIGNER : 3-1/8"

UNIVERSAL TRANSFER PUNCH & ALIGNER : 3-1/8"

  • DELHI, DELHI, India
  • May 30th
4" (100mm) ROTARY TABLE FOR MYFORD LATHE VERTICAL SLIDE + FIXED VERTICAL SLIDE

4" (100mm) ROTARY TABLE FOR MYFORD LATHE VERTICAL SLIDE + FIXED VERTICAL SLIDE

  • DELHI, DELHI, India
  • May 30th
4" (100mm) ROTARY TABLE FOR MYFORD LATHE VERTICAL SLIDE + SWIVEL VERTICAL SLIDE

4" (100mm) ROTARY TABLE FOR MYFORD LATHE VERTICAL SLIDE + SWIVEL VERTICAL SLIDE

  • DELHI, DELHI, India
  • May 30th
Bison-Bial 12.0" 3-Jaw Large Hole Power CNC Lathe Chuck-Kitagawa Style

Bison-Bial 12.0" 3-Jaw Large Hole Power CNC Lathe Chuck-Kitagawa Style

  • Hamden, Connecticut, United States
  • May 30th
Bison-Bial 6" 16C CNC Lathes Power Collet Chuck -.0004" TIR

Bison-Bial 6" 16C CNC Lathes Power Collet Chuck -.0004" TIR

  • Hamden, Connecticut, United States
  • May 30th
Bison-Bial 5" 5C Power Collet Chuck for CNC Lathe-.0004" TIR

Bison-Bial 5" 5C Power Collet Chuck for CNC Lathe-.0004" TIR

  • Hamden, Connecticut, United States
  • May 30th
BRAND NEW Machine Tool Vise 8" With Swival Base 8-1/2" Opening Bemato

BRAND NEW Machine Tool Vise 8" With Swival Base 8-1/2" Opening Bemato

  • Carlyle, Illinois, United States
  • May 31st
HEAVY DUTY INDUSTRIAL 6" MILLING MACHINE VICE

HEAVY DUTY INDUSTRIAL 6" MILLING MACHINE VICE

  • Belmont, North Carolina, United States
  • May 31st
STARRETT 160 SMALL MINI VISE 2"

STARRETT 160 SMALL MINI VISE 2"

  • Rock Tavern, New York, United States
  • May 31st
PROTO TOOLS - Professional Long Reach Pliers, Part# 240G

PROTO TOOLS - Professional Long Reach Pliers, Part# 240G

  • Philadelphia, Pennsylvania, United States
  • Jun 9th
O.S. Walker Fine Pole Permanent Magnetic Chuck Magnet 5"x10" for Grinder or EDM

O.S. Walker Fine Pole Permanent Magnetic Chuck Magnet 5"x10" for Grinder or EDM

  • Helenville, Wisconsin, United States
  • Jun 9th
Lot of 26 Machinist Work holding Bolts 5/16. 3/8, 1/2" Stud

Lot of 26 Machinist Work holding Bolts 5/16. 3/8, 1/2" Stud

  • East Longmeadow, Massachusetts, United States
  • Jun 9th
MITUTOYO V BLOCKS SET OF 2 WITH CLAMPS NO 181-904 WORKHOLD GRINDING MACHINIST

MITUTOYO V BLOCKS SET OF 2 WITH CLAMPS NO 181-904 WORKHOLD GRINDING MACHINIST

  • Lombard, Illinois, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL Large Brown & Sharpe V Block for Set Up

MACHINIST TOOLS LATHE MILL Large Brown & Sharpe V Block for Set Up

  • Morris Plains, New Jersey, United States
  • Jun 9th
(Lot of 2) Machinist Tool Right Angle Plates (8 x 5 x 4-1/2) Japan

(Lot of 2) Machinist Tool Right Angle Plates (8 x 5 x 4-1/2) Japan

  • Mount Pleasant, South Carolina, United States
  • Jun 9th
Used Haas Ha5C Brush Style 5C Collet Rotary Table Indexer Red 4th axis

Used Haas Ha5C Brush Style 5C Collet Rotary Table Indexer Red 4th axis

  • Itasca, Illinois, United States
  • Jun 9th
NICE!! TSK-250 UNIVERSAL 10" TILTING ROTARY TABLE

NICE!! TSK-250 UNIVERSAL 10" TILTING ROTARY TABLE

  • La Puente, California, United States
  • Jun 9th
SPi B&S-0 Precision Dividing Head Tailstock Machinist Milling Machine Tool

SPi B&S-0 Precision Dividing Head Tailstock Machinist Milling Machine Tool

  • Yorktown, Virginia, United States
  • Jun 9th
LOT "LL" NMTB40 HOLDER DOUBLE TAPER "ZZ" COLLET CHUCK AND 6PCS. COLLETS

LOT "LL" NMTB40 HOLDER DOUBLE TAPER "ZZ" COLLET CHUCK AND 6PCS. COLLETS

  • Fairfield, Iowa, United States
  • Jun 15th
Spellbinders Card Creator Die-Candy Cane Card Front

Spellbinders Card Creator Die-Candy Cane Card Front

  • Hickory Hills, Illinois, United States
  • Jun 15th
"Penny Black Cling Stamp 5""X7""-Pretty Perch"

"Penny Black Cling Stamp 5""X7""-Pretty Perch"

  • Hickory Hills, Illinois, United States
  • Jun 15th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies