+ Post new Ad
Surface Plate by Brown and Sharpe In Very Good Condition, US $2,250.00 – Picture 0
Surface Plate by Brown and Sharpe In Very Good Condition, US $2,250.00 – Picture 1
Surface Plate by Brown and Sharpe In Very Good Condition, US $2,250.00 – Picture 2
Surface Plate by Brown and Sharpe In Very Good Condition, US $2,250.00 – Picture 3
Surface Plate by Brown and Sharpe In Very Good Condition, US $2,250.00 – Picture 0
Surface Plate by Brown and Sharpe In Very Good Condition, US $2,250.00 – Picture 1
Surface Plate by Brown and Sharpe In Very Good Condition, US $2,250.00 – Picture 2
Surface Plate by Brown and Sharpe In Very Good Condition, US $2,250.00 – Picture 3

Surface Plate By Brown And Sharpe In Very Good Condition

US $2,250.00

  • Dalton, Georgia, United States
  • Jan 30th
Open on mobile:
QR code
Surface Plate by Brown and Sharpe In Very Good ConditionDimensions are 60" x 36" x 8" thickIncludes tableInspection:  This item is welcome to inspection by the buyer or buyer's representative before purchase.  Please contact us for further details. Shipping: Buyer is responsible for shipping costs and due to the nature of this item, it will need to be shipped via flat bed truck. Please contact us with your zip code and whether it would be going to a commercial address with a dock or outdoor forklift (either yours, one you are employed at, or a friend or relative's), one without, or residence for an accurate shipping quote. It is imperative that you provide both pieces of information! Please note residential delivery is typically higher, so it is better to have it delivered to a commercial address or to one of our carrier's terminals in your area for pickup at the terminal. Also, we are able to ship using your carrier if preferred and we will provide the necessary contact information to forward a bill of lading, pickup address, etc. Local pickup is available as well. Can you believe our  price? Packoderm Industrial - Eliminating pack rats one sell at a time! Sellers: Delight buyers. Get your own map of past buyers. FREE! Sellers: Add a FREE map to your listings. FREE!
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Has a few small nicks in top but should not effect performance.”

Directions

Similar products from Fittings & Plates

WELDING TABLE, BIG 102x43in AL Top, Steel base, MAKE OFFER

WELDING TABLE, BIG 102x43in AL Top, Steel base, MAKE OFFER

  • New Stanton, Pennsylvania, United States
  • Jan 30th
WELDING TABLE, Long 91 in x 36in x 30in high, 1.0 IN THICK AL TOP, STEEL LEGS

WELDING TABLE, Long 91 in x 36in x 30in high, 1.0 IN THICK AL TOP, STEEL LEGS

  • New Stanton, Pennsylvania, United States
  • Jan 30th
PLASMA CAM Cutter Grates CNC X and Y Slats - Read Description

PLASMA CAM Cutter Grates CNC X and Y Slats - Read Description

  • Wauseon, Ohio, United States
  • Jan 30th
Vacuum table VT4040GAL CNC CHUCK Engraving or Milling

Vacuum table VT4040GAL CNC CHUCK Engraving or Milling

  • Exeter, Rhode Island, United States
  • Jan 30th
Vertex, Milling Adjustable Angle Plate, 600 mm x 300 mm x 202 mm, New

Vertex, Milling Adjustable Angle Plate, 600 mm x 300 mm x 202 mm, New

  • Miami, Florida, United States
  • Jan 30th
Ground Right Angle Ribbed Machine Plate, 8" x 8" x 8" x 7/8", Cast Iron |11D|

Ground Right Angle Ribbed Machine Plate, 8" x 8" x 8" x 7/8", Cast Iron |11D|

  • Saint Louis, Missouri, United States
  • Jan 30th
57" x 15" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig

57" x 15" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig

  • Grand Rapids, Michigan, United States
  • Jan 30th
38" x 10.2" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig

38" x 10.2" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig

  • Grand Rapids, Michigan, United States
  • Jan 30th
Suburban Tool Value Line -Precision Angle Plate 4x4x4x1 1/4

Suburban Tool Value Line -Precision Angle Plate 4x4x4x1 1/4

  • Auburn Hills, Michigan, United States
  • Jan 30th
V-STYLE BED FIXTURE RISER BLOCK FOR LATHE

V-STYLE BED FIXTURE RISER BLOCK FOR LATHE

  • Chino, California, United States
  • Jan 30th
Surface Plate In Very Good Condition

Surface Plate In Very Good Condition

  • Dalton, Georgia, United States
  • Jan 30th
Plasma CAM grate grid slats CNC plasma cutter SAVE $$$$ AccuFast2D 101814 GTC

Plasma CAM grate grid slats CNC plasma cutter SAVE $$$$ AccuFast2D 101814 GTC

  • Shelbyville, Tennessee, United States
  • Jan 30th
Aluminium Vacuum table 260 x260mm w/ ON-OFF & Adjust Switch (#960)

Aluminium Vacuum table 260 x260mm w/ ON-OFF & Adjust Switch (#960)

  • Taipe, Taiwan
  • Jan 30th
7" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-3/8"-5 THREADED MOUNT

7" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-3/8"-5 THREADED MOUNT

  • Chino, California, United States
  • Jan 30th
6-1/2" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-1/4"-8 THREADED MOUNT

6-1/2" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-1/4"-8 THREADED MOUNT

  • Chino, California, United States
  • Jan 30th
8" SLOTTED MOUNTING FACE PLATE FOR LATHE W/ 2-1/4"-8 THREADED MOUNT

8" SLOTTED MOUNTING FACE PLATE FOR LATHE W/ 2-1/4"-8 THREADED MOUNT

  • Chino, California, United States
  • Jan 30th
9" HARDINGE C27 MOUNTING FIXTURE FACE PLATE FOR LATHE W/ TAPER LOCK MOUNT

9" HARDINGE C27 MOUNTING FIXTURE FACE PLATE FOR LATHE W/ TAPER LOCK MOUNT

  • Chino, California, United States
  • Jan 30th
12-3/4" FACE PLATE FACEPLATE 1-11/16"-9 THREAD MOUNT FOR LATHE

12-3/4" FACE PLATE FACEPLATE 1-11/16"-9 THREAD MOUNT FOR LATHE

  • Chino, California, United States
  • Jan 30th
EXCELLENT!! 12" LATHE CHUCK MOUNTING BACK PLATE W/ D1-8 MOUNT

EXCELLENT!! 12" LATHE CHUCK MOUNTING BACK PLATE W/ D1-8 MOUNT

  • Chino, California, United States
  • Jan 30th
32" x 33"h Giddings & Lewis Cast Iron Angle Plate

32" x 33"h Giddings & Lewis Cast Iron Angle Plate

  • Chicopee, Massachusetts, United States
  • Jan 30th

People who viewed this item also vieved

Kennametal # 180DA0594 Double Angle Collet 19/32"

Kennametal # 180DA0594 Double Angle Collet 19/32"

  • Coventry, Rhode Island, United States
  • May 28th
Kennametal # DA180A0562 Double Angle Collet 9/16

Kennametal # DA180A0562 Double Angle Collet 9/16

  • Coventry, Rhode Island, United States
  • May 28th
Kennametal # 180DA0531 17/32"Double Angle Collet

Kennametal # 180DA0531 17/32"Double Angle Collet

  • Coventry, Rhode Island, United States
  • May 28th
25 NEW IN BOX DE-STA-CO Horizontal Handle Hold Down Action Clamp 206-HSS ! K295

25 NEW IN BOX DE-STA-CO Horizontal Handle Hold Down Action Clamp 206-HSS ! K295

  • Colorado Springs, Colorado, United States
  • May 29th
WOLVERINE LAPEER LINEAR CLAMP MODEL C-130 A PUSH CLAMP (5800 LB CAP.) On Mount

WOLVERINE LAPEER LINEAR CLAMP MODEL C-130 A PUSH CLAMP (5800 LB CAP.) On Mount

  • Portland, Oregon, United States
  • May 29th
Vintage JACKSON Toolmakers's Parallel Clamp

Vintage JACKSON Toolmakers's Parallel Clamp

  • Dearborn Heights, Michigan, United States
  • May 29th
New Riten 6J Super Accurate Live Center 12206

New Riten 6J Super Accurate Live Center 12206

  • Madison, Alabama, United States
  • May 30th
FAVOR SWISS MADE Live Center MT 3 -to- 3A Jacobs Taper D3 3A

FAVOR SWISS MADE Live Center MT 3 -to- 3A Jacobs Taper D3 3A

  • Nappanee, Indiana, United States
  • May 30th
FAVOR SWISS MADE Live Center MT 3 DX3

FAVOR SWISS MADE Live Center MT 3 DX3

  • Nappanee, Indiana, United States
  • May 30th
Bison 10" 4-Jaw Steel Body Independent Lathe Chuck w/Two Piece Reversible Jaws

Bison 10" 4-Jaw Steel Body Independent Lathe Chuck w/Two Piece Reversible Jaws

  • Hamden, Connecticut, United States
  • May 30th
Bison 8" 4-Jaw Steel Body Independent Lathe Chuck w/Two Piece Reversible Jaws

Bison 8" 4-Jaw Steel Body Independent Lathe Chuck w/Two Piece Reversible Jaws

  • Hamden, Connecticut, United States
  • May 30th
Bison 25" 3-Jaw Extra Heavy Duty Indirect A2-20 Mount Oil Country Lathe Chuck

Bison 25" 3-Jaw Extra Heavy Duty Indirect A2-20 Mount Oil Country Lathe Chuck

  • Hamden, Connecticut, United States
  • May 30th
Heinrich 4-GM Grip-Master Drill Press Vise - Jaw Opening - 4-11/16'

Heinrich 4-GM Grip-Master Drill Press Vise - Jaw Opening - 4-11/16'

  • Duncan, South Carolina, United States
  • May 31st
WILTON Utility Vise - Model : 656HD Jaw Width: 6'' Maximum Opening: 6''

WILTON Utility Vise - Model : 656HD Jaw Width: 6'' Maximum Opening: 6''

  • Duncan, South Carolina, United States
  • May 31st
PALMGREN Drill Press Vise Jaw Width - 4'' Jaw Opening - 4'' Jaw Depth - 1-3/4''

PALMGREN Drill Press Vise Jaw Width - 4'' Jaw Opening - 4'' Jaw Depth - 1-3/4''

  • Duncan, South Carolina, United States
  • May 31st
ELLIOTT 3-1/2" SWING UNIVERSAL DIVIDING HEAD 1-1/2" 8 SPINDLE THREAD #2 MT

ELLIOTT 3-1/2" SWING UNIVERSAL DIVIDING HEAD 1-1/2" 8 SPINDLE THREAD #2 MT

  • Highland, New York, United States
  • Jun 9th
Precision Brand Part # 17535 .031 Brass 6" X 100" shim (new box)

Precision Brand Part # 17535 .031 Brass 6" X 100" shim (new box)

  • Scranton, Pennsylvania, United States
  • Jun 9th
Hardinge Indexer Wrench " Awesome Tool"

Hardinge Indexer Wrench " Awesome Tool"

  • Fairport, New York, United States
  • Jun 9th
Pair Lufkin Rule Co. V-Blocks with Clamps

Pair Lufkin Rule Co. V-Blocks with Clamps

  • Antrim, New Hampshire, United States
  • Jun 9th
ANGLE PLATE COMPOUND 2 7/8 x 5 x 2.5 GRINDING MILL TOOLMAKER MACHINIST

ANGLE PLATE COMPOUND 2 7/8 x 5 x 2.5 GRINDING MILL TOOLMAKER MACHINIST

  • Stoneboro, Pennsylvania, United States
  • Jun 9th
MACHINIST MILL LATHE Machinist 2 Large 2 4 6 Blocks Ground Hardened Hold Down

MACHINIST MILL LATHE Machinist 2 Large 2 4 6 Blocks Ground Hardened Hold Down

  • Morris Plains, New Jersey, United States
  • Jun 9th
L-W Dividing Head & Tailstock, 7" Indexer Headstock Table, Chuck Plate Quick CNC

L-W Dividing Head & Tailstock, 7" Indexer Headstock Table, Chuck Plate Quick CNC

  • Franksville, Wisconsin, United States
  • Jun 9th
Camco Indexer 601RDM12H24-270 10:1 RATIO 1750 RPM

Camco Indexer 601RDM12H24-270 10:1 RATIO 1750 RPM

  • Cedarburg, Wisconsin, United States
  • Jun 9th
New 18" D1-8 Camlock Faceplate

New 18" D1-8 Camlock Faceplate

  • Johnson City, New York, United States
  • Jun 9th
Copic Various Ink Refill For Sketch & Ciao Markers-Grayish Violet

Copic Various Ink Refill For Sketch & Ciao Markers-Grayish Violet

  • Hickory Hills, Illinois, United States
  • Jun 15th
"Jolee's Easy Image Transfer Sheets 8.5""X11""-Mouse Pad"

"Jolee's Easy Image Transfer Sheets 8.5""X11""-Mouse Pad"

  • Hickory Hills, Illinois, United States
  • Jun 15th
Spellbinders Designer Die-Tiered Multiloop Bows

Spellbinders Designer Die-Tiered Multiloop Bows

  • Hickory Hills, Illinois, United States
  • Jun 15th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies