3400 / 3 for sale, brand-new and used.

For Sale is a Comet ZWD4040G Pressure washer Pump New from the factory. These pumps are extremely reliable an easily rebuilt if needed. This pump is a Direct Drive Pump.

This Comet BXD2528G replacement pressure washer or power washer pump comes complete with unloader valve, detergent injection system, bolts to mount it to an engine, and three high pressure outlet fittings so you can customize your pump to your existing hose setup. This pump will fit most 5 HP to 7 HP engines with a 3/4" horizontal shaft. This pump works great for residential or light duty commercial use.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: eight 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precison die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

SPECIFICATIONS: Maximum volume: 4.0 GPM Maximum discharge pressure: 4000 PSI Maximum pump speed: 3400 RPM Horsepower requirements: 12.5 GHP Bore: 14mm Stroke: 10mm

RMV2.4G30D-EZ Annovi Reverberi Pressure Washer Pump

RMV2.4G30D-EZ Annovi Reverberi Pressure Washer Pump

TT SERIES 51, GBF Forged brass manifold with exclusive lifetime warranty Die cast, anodized aluminum oil bath crankcase Solid ceramic plungers continuously lubricated packings The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves Ideal for all general cleaning applications Comes standard with SAE J609 gasoline engine mounting flange Also available in "L" left handed versions SPECIFICATIONS Triplex

EZ SERIES 44G FEATURES: Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version SPECIFICATIONS: Tripl

FEATURES: Built-in unloader and downstream injector on the left side of the manifold SAE J609B flange for direct couple to gasoline engines Large lightweight connecting rods New long life low and high pressure seals Oversized roller bearings Dual sight glasses Forged brass manifold with an exclusive lifetime warranty SPECIFICATIONS: Triplex Plunger Pump Maximum volume: 4.0 GPM

FEATURES: Innovative one piece plunger design 5% reduction in crankcase load compared to standard 3000 psi 15mm pumps Superior plunger performance against thermal shock and cavitation due to new, unique bonding process Standard SAE J609 gasoline mounting flange for up to 16hp engines Forged brass manifold with a 3:1 hydrostatic rating Die-cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves

FEATURES: Innovative one piece plunger design 5% reduction in crankcase load compared to standard 3000 psi 15mm pumps Superior plunger performance against thermal shock and cavitation due to new, unique bonding process Standard SAE J609 gasoline mounting flange for up to 16hp engines Forged brass manifold with a 3:1 hydrostatic rating Die-cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized tapered roller bearing for maximum life and load disbursement Bearing Support: Precision die cast and machined to assure c

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: eight 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precison die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Valves, Seats, a

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

SPECIAL FEATURES FOR XT SERIES: Manifold is high strength forged brass for long term use.

SPECIAL FEATURES FOR XT SERIES: Manifold is high strength forged brass for long term use.

For Sale is a Anno Reverbi XMV4G30D-F24 Pressure washer Pump For Gas Motors, New from the factory. Anno Reverbi has lead the Italian Pump Industry for several Years. This pump is a Direct Drive Pump.