36/36 for sale, brand-new and used.

Search Shop:

Search Shop:

var itemNumber = window.ebayItemID ?

1 pole 5 position make before break rotary switch silver and gold 2A 115V You are bidding on a

GRAY HILL 43D36-02-1-AJN ROTARY SWITCH, STANDARD , ADJUSTABLE STOP, 36-DEG, 2 DECK, 1 POLE/DECK, NON-SHORTING, 2 TO 10 POSITIONS, 2 DECKS, 1A CURRENT RATING, 115VAC, 28 VDC, PANEL MOUNT, SILVER PLATING, 10P20T CONTACT FORM.

These are great switches. Thanks for biding!!! Technical Characteristics - detailed information such as measurements and material type for national stock numbers

THIS ITEM IS FOR 1 (ONE): GRAYHILL MINIATURE, ENCLOSED, ROTARY SWITCH: 2 POLE -- 10 POSITIONS (1 pole/deck, 2 decks) EACH DECK IS: SP-10 POSITIONS 10 POSITIONS continuous rotation, as shipped, adjustable stops. Included are 2 stops that you can easily install for whatever you need. NON-SHORTING (break-before-make) 36 degree angle of throw (index) RATING: .3A @ 115vAC, 30vDC

Janco 5 Amp 115 VAC 2 position 36 Tab Rotary Switch Part# 79-1933 8716 Made In The USA, Burbank CA. They were for a project I never finished Out of the 36 connection tabs 2 sets of 6 are brass for positive connection and each positive has 2 negative tabs Comes with hardware, terminal screws, nut and lock washer for panel mounting These are very pricy even wholesale, These are at about 20% of what you would normally pay I combine shipping

THIS ITEM IS FOR 1 (ONE): GRAYHILL MINIATURE ROTARY SWITCH: 5 POLE -- 7 POSITIONS 1 POLE PER DECK, 5 DECKS NON SHORTING (break-before-make) 36 degree angle of throw Fixed stops at position 1 and position 7. RATING: 1A @ 115vAC DIM: 1" OD X 2 5/8"L SHAFT: 1/4" W/FLAT X 1/4"L

Cole Instrument Corp. Rotary Switch Part # 1800-3755 NSN 5930-01-137-8768 Specifications : 10-Position Thread length : 1/4" Terminal type : tab, solder lug & turret Switch actuator positioning increment : 36 degrees Shaft diameter : 1/8" Contact voltage : 115 VAC / 30 VDC Contact load current rating : 250 milliamperes AC/DC xxqxx02

Lab Pro Audio type 36 position good used rotary switch.This switch has 36 positions w/72 total wiper contact pads if you include the suppression or isolation pads between the actual contact pads. LAB QUALITY 1 Pole that is set up to be able to do 4 way contact sharing rotary switch. The shared contact wipers are at 90 degree phase.

ONE NEW OLD STOCK GRAYHILL ROTARY SWITCH PART# M3786/4-0639 , 42M36-012-04N, THANKS FOR LOOKING 5930-01-178-8738 5930 011788738 Switch, Rotary 02134 5930-01-178-8738 Features MRCParameterCharacteristics AASA Thread Length 0.437 inches nominal single mounting facility

Cole-Hersee Marine battery switch. Model M705 Marked on switch: 175 amps continuous and 325 amps intermittent at 6-12-24 or 36 volts. Four position switch.

HATCO RMB-3D REMOTE CONTROL BOX 1 TOGGLE SWITCH 12 VOLT GRAH-36 2A1210 Brand NEW:Warranty: 14 Days Specs on Plate: REMOTE CONTROL BOX MODEL: RMB-3B FOR USE WITH LISTED FOODWARMER MODEL: GRAH-36 INTENDED FOR USE WITH METALLIC TUBING 208 VAC USE COPPER WIRE ONLY U.L. FILE E42639

GENUINE CARLING CONTURA III ROCKER SWITCH, BLACK ROCKER MOMENTARY ON - OFF ACCESSORY SWITCH USED IN TRUCKS BUSES FARM, CONSTRUCTION, HEAVY EQUIPMENT REPLACES 2 WIRE MOMENTARY SPST CONFIGURATIONS.FITS INDUSTRY STANDARD DASH PANELS UP TO 1/4" THICK. REQUIRES RECTANGULAR HOLE 0.83"X1.45" TO SNAP INTO. STANDARD 1/4" MALE SPADE TERMINALS.

GENUINE CARLING CONTURA III ROCKER SWITCH, RED ROCKER MOMENTARY ON - OFF ACCESSORY SWITCH USED IN TRUCKS BUSES FARM, CONSTRUCTION, HEAVY EQUIPMENT REPLACES 2 WIRE MOMENTARY SPST CONFIGURATIONS.FITS INDUSTRY STANDARD DASH PANELS UP TO 1/4" THICK. REQUIRES RECTANGULAR HOLE 0.83"X1.45" TO SNAP INTO. STANDARD 1/4" MALE SPADE TERMINALS.

GENUINE CARLING CONTURA III ROCKER SWITCH, STANDARD LIGHTED (RED) ON/OFF ACCESSORY SWITCH USED IN TRUCKS BUSES FARM, CONSTRUCTION, HEAVY EQUIPMENT REPLACES 2 WIRE NON LIGHTED & 3 WIRE LIGHTED SPST CONFIGURATIONS.FITS INDUSTRY STANDARD DASH PANELS UP TO 1/4" THICK. REQUIRES RECTANGULAR HOLE 0.83"X1.45" TO SNAP INTO. STANDARD 1/4" MALE SPADE TERMINALS.