368 4 for sale, brand-new and used.

We've got a Jones & Lamson Model 22S-23S Die Head with 1/4 20 chasers. Attached is an 9 3/4" tall arbor with a 1 1/4" shank. I attempted to remove it, but it's on there snugly.

Here’s a Di Acro #2, 6"x6", 16ga., Tab Notcher / Corner Shear w/Stand “SHARP” This one was made when they still made them good AND it’s the highly desirable, deep throat, heavy duty #2 model…

Vintage Stanley 16 Gauge Capacity Unishear - electric shear for cutting sheet metal. Weighs in at a little over 10 pounds, measures about 12 1/2" L x 4 1/2" W x 12 1/2" T. 1800 RPM load, 2.8 Amps, 110 Volts.

Vintage Dumore Grinder by Wisconsin Electric Company with all the attachments and accessories that you see pictured. Type 2AG. Needs new cord and switch, came from a working environment, untested, offered as is and as pictured.

Dumore No. 44-011 tool post grinder. Model number 8006-210, serial number 1721.

Set of knurling tool wheels, model C-11.There is a W brand marking at the top of each wheel. Outer diameter of 3/4" and inner diameter of 1/4". Wheels are 3/8" thick.

Set of two unmarked knurling tool wheels. Outer diameter of 3/4" and inner diameter of 1/4". Wheels are 3/8" thick.

Used lathe lantern style tool holder. 6 3/4" tall. Opening is 3/4" wide and the bottom base is 2 1/8" x 2 3/8".

Used Kearney & Trecker dividing head with a 6 1/4" diameter. Comes with 7 total plates ( 5 3/8" diameter) and a tail stock. Please take a close look at all of the photos.

This lathe milling attachment appears to be in good working order. It is dirty but does not seem abused or even rusty. There are two planes of rotation.

Set of Armstrong knurling tool wheels. Model 8227, marked L and R and High Speed. Outer diameter of 5/8" and inner diameter of 1/4".

Pair of Precision Machinist Blocks. 8X3X3/4" and 8X3X1/2" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in!

SquareTrade © AP6.0 FEDERAL DIAL .002MM WETPROOF INDICATOR MODEL WP1I You are bidding on a Federal easy to read 57mm (2 1/4") Diameter Size .5MM Range .002MM Dial Indicator with revolution counter, Model #WP1I. These indicators have a shockless, hardened steel gear train and jewel bearings Dial: approx. 57mm dia.

Lot of three height scribers/scribes for height gauge. Measurements are as follows: Top: 7" L x 1 3/16" T x 3/8" Th, bar end measures 3/8" Th x 3/8" T.Middle: 2 3/8" L x 1 3/16" T x 1/4" Th, bar end measures 3/8" Th x 1/2" T.Bottom: 2 5/16" L x 1 3/16" T x 1/4" Th, bar end measures 1/4" Th x 1/2" T. Conditions are as pictured, good but not pristine, please examine pictures closely.

Featured Item: Mitutoyo 368-278 Holtest Vernier Inside Micrometer, Three-Point, 8-9" Range, 0.0002" Graduation, +/-0.00025" Accuracy Item Condition: New Product Description:

Vintage 368-216 Mitutoyo Bore Gauge, Holtest Series 368. 3.6-4 bore. Made in Japan.

Lot of (9) Rulers and square rulers. (8) Starrett and (1) Brown & Sharpe. $10.00 FedEx ground shipping in the U.S.

Precision Machinist Block Bender Die with Dovetail. HR12 1 3/4"tall 1 1/4"wide dovetail is1/2" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in!

Classic Archives Listing Please visit our About

Classic Archives Listing Please visit our About