375 8 for sale, brand-new and used.

PLASTIC INJECTION TOOLING STEEL MOLD DIE FOR GOLF DIVIT TOOL MAKE SOME $$$ THIS IS FOR MAKING GOLF DIVIT, HAS GREENLYNX LOGO IN IT NOW, BUT, A TOOL MAKER CAN MAKE THAT GO AWAY AND PUT YOUR LOGO IN THERE IF DESIRED. APPROX. OVERALL DIMS = 5.125" CLOSED X 5" X 8" DISTANCE BETWEEN PINS ON AN ANGLE APPROX.

PLASTIC INJECTION TOOLING STEEL MOLD BASE, MAKE TRANSCRYPT INTERNATIONAL LENS APPROX. OVERALL DIMS = 9.25" CLOSED X 12" X 11.75" INSERT APPROX. DIMS 10" X 5.25 ON EJECTOR SIDE AND HOT SIDE IS SOLID.

PLASTIC INJECTION TOOLING STEEL MOLD DIE BASE FOR PLASTIC PLUGS OVERALL DIMS. = 10.375" X 9.875" X 20" INSERTS APPROX. DIMS = TWO =6.625" X 8.5" AND TWO = 6" X 8" DISTANCE BETWEEN PINS SIDE TO SIDE APPROX.

PLASTIC INJECTION TOOLING STEEL MOLD DIE BASE, SEAGULL SCIENTIFIC, GOOD TEST UNIT! OVERALL DIMS. = 7.75" X 9.875" X 8" INSERTS APPROX.

PLASTIC INJECTION TOOLING STEEL MOLD DIE. MAKES ROYS COMMANDER WHISTLE. MISSING BOTTOM SLIDE TO MAKE RECTANGLE HOLE IN MOUTH PIECE.

PLASTIC INJECTION TOOLING STEEL MOLD DIE, MAKES HOUSING BASE INSERT DIMS APPROX. 5" X 8" ONLY ON ONE SIDE, OTHER IS SOLID. APPROX.

NEW DELTA 31-375 1-Inch x 42-Inch 220 Grit Sanding Belts (5-Pack)

Shark 13997 0.375-Inch Acid Brush, 144-Pack

QUANTITY: 9 Part No. CBN or Diamond A

Blind hole laps 4 - .875 5- .625 3- .562 10- .5

SQUARE PUSH BROACH CONDITION = NEW SQUARE PUSH BROACH MANUFACTURER = POLAND SQUARE PUSH BROACH MATERIAL = HIGH SPEED STEEL SQUARE PUSH BROACH SIZE = 7/16" BROACH LENGTH = 10-5/8" BROACH PILOT DIAMETER= .4375" DRILL SIZE 7/16" BROACH TOLERANCE = .4385" - .4395" LENGTH OF CUT = MIN 1/2" &

SQUARE PUSH BROACH CONDITION = NEW SQUARE PUSH BROACH MANUFACTURER = POLAND SQUARE PUSH BROACH MATERIAL = HIGH SPEED STEEL SQUARE PUSH BROACH SIZE = 1/8" BROACH LENGTH = 4-1/8" BROACH PILOT DIAMETER= .1250" DRILL SIZE 1/8" BROACH TOLERANCE = .1255" - .1260" LENGTH OF CUT = MIN 3/16" &nb

SQUARE PUSH BROACH CONDITION = NEW SQUARE PUSH BROACH MANUFACTURER = USA SQUARE PUSH BROACH MATERIAL = HIGH SPEED STEEL SQUARE PUSH BROACH SIZE = 7/16" BROACH LENGTH = 11-1/2" BROACH PILOT DIAMETER= .4531" DRILL SIZE 29/64" BROACH TOLERANCE = .4385" - .4395" LENGTH OF CUT = MIN 1/2" &nb

HEXAGON BROACH CONDITION = NEW HEXAGON BROACH MANUFACTURER = USA BROACH MATERIAL = HIGH SPEED STEEL BROACH HEX SIZE = 15/32" {.4688"} TOLERANCE = .4385" - 4700" BROACH LENGTH = 12-3/8" PILOT DIAMETER = 15/32" DRILL SIZE = 15/32" LENGTH OF CUT MINIMUM/MAXIMUM = 1/2" (.500") 1-3/8" (1.375") YOUR COST = $112.40

Hi , you are bidding on 1- .3/16" FULL Radius cutter - 2 1/4" dia. x .375" thick with 7/8" hole . Made by Illinois tool works made in U.S.A.

Quantity of 10 Kennametal I 69 004 375 KC850 Carbide In