375 8 for sale, brand-new and used.

Corner Rounding End Mills | Radius (Inch): 7/16 | Mill Diameter (Inch): 1-3/8 | Number of Flutes: 4 | Material: High Speed Steel | Finish/Coating: Uncoated | Single or Double End: Single Product Specifications Radius (Inch) 7/16 Mill Diameter (Inch) 1-3/8 Number of Flutes 4 Material High Speed Steel Finish/Coating Uncoated Single or Double End Single Shank

3/8 coated chamfer tool

SGS! Brand new! Ultra High Performance!

1/8 " carbide end mill with a 3/8 shank usa made 4 flute diameter-.125 shank diameter-..375 lenght-2.500 length of cut-.250

Solid submicron grain carbide end mill - center cutting Specific coating engineered to repel aluminum Engineered to run at 750 - 2500 SFM For high speed machining of aluminum High velocity - high metal removal rate Use properly balanced holders Holds perpendicularity

Lot Of 3 New OSG Tap & Die Tialn Coated End Mills made in USA  9/32" 

NEW Gleason Gear Hob 8”x 4.375”x2”, .5x.5 key, 6-thd,

Assortment of Machine Tooling. Used 1 Radius Cutter HSS 0.375 R x 0.750 Shank (end was ground for clearance and other end of shaft was attempted to be turned down, still useable) Used 1 Roughing Endmill HSS 1.00 Diameter x 0.750 Shaft. New Chuck Arbor 0.625 Straight Shank x 33 Chuck Mount.

Item is new, unused but had been stored in a machine shop environment not in its protective case. All flutes are flawless, no dings. Item is exactly as pictured.

Item appears new, unused. Was stored in a machine shop environment not in it's protective case. All flutes are flawless, no dings.

5 - MANCHESTER FI-375-20-4T C2 CARBIDE TIPPED V BACK CUTTERS IN WHAT APPEARS TO BE NEW NEVER USED CONDITION. MOST OF THEM HAVE RUBBER DIP STILL ON THEM. THEY ARE 4" LONG WITH A 3/8" CUT WIDTH.

5 - MANCHESTER C2 FI-375-30 CARBIDE TIPPED V BACK CUTTERS IN WHAT APPEARS TO BE NEW NEVER USED CONDITION. MOST OF THEM HAVE RUBBER DIP STILL ON THEM. THEY ARE 4 7/8" LONG WITH A 3/8" CUT WIDTH.

Oversized 1/4 x 1 3/8 x 12" carbide blank. C2 carbide.  

Item #22Maker: National Twist Drill & ToolApproximate Dimensions (in Inches)-Arbor-1.25"Thickness - .375" (measured .375")Cutter Diameter - etched = 6.00" (measured 5 5/8")Number of teeth - 26 Staggered Tooth DesignEtched on cutter- "High Speed" "M"

LISTED ARE 2 LIGHTLY USED VALENITE CARBIDE BORE BARS THAT LOOK LIKE NEW. EACH HAS 1 INSERT. BOTH TAKE THE SAME INSERT.

Ingersoll Form Master Indexable Button Face Mill(5W6M-60R01 / Old EDP: 5W6M06R20) Nominal Diameter: 6.00"Bore Diameter: 1.500"Keyway: 0.62"Height: 2.375"Number of Flutes: 8Cutting Edge Length: 0.37"Insert Inscribed Circle: 0.750"

You are bidding on (3) - Micro 100, Solid Carbide Groove Tools, Grooving Tool Full Radius 0.055"W, 3/8" shank - USED!!! Sold in "as-is" used condition, see photos, read description, these have remaining life if reground!

You are bidding on (4) - Micro 100, Solid Carbide Groove Tools, 0.055" W, 3/8" shank - USED!!! Sold in "as-is" used condition, see photos, read description, these have remaining life if reground!

You are bidding on (2) - Solid Carbide Groove Tools, .055" W, 3/8" Dia. shank Sold in "as-is" used condition, see photos, read description, these have remaining life if reground!