375 x 5 for sale, brand-new and used.

ITEM: Dcfm8901 - Digital Two Piece Airflow Meterwith Rs-232 Computer Interface

General DCFM8901 Digital Two Piece Air Flow Meter with RS232 Output New - Factory Authorized Distributor - Factory Warranty

THIS IS A USED NCR MODEL 460-X LINEAR POSITIONER WITH A .5" MITUTOYO MIC. IT HAS A (POSIBLE) TRAVEL OF APPROX. 1.0", 2.375" X 1.5" PLATFORM AND A FOOTPRINT OF APPROX.2.375" X 2.375".

Hess Model L-200 Ozone Generator with T-150 Injection Tank - Serial Number 40290 - Manufacturer: Hess Machine International, Ephrata Pennsylvania Factory rated; - Flow Rates 90 Gallons per Minute (5400 GPH) - Ozone Yield 2 lbs/day - Tank Capacity 150 Gallons

THIS IS A NEW ENGLAND AFFILIATED TECHNOLOGIES BRAND LINEAR POSITIONER WITH A VEXTA MODEL C5858-9012 2 PHASE 4V 1.2A. DC STEPPER / 1.8 DEG./STEP (ALSO HAND ADJUSTABLE). IT HAS A 4.375" TRAVEL WITH A 5" X 2.625" PLATFORM AND A 5" X 3.375" FOOTPRINT.

THESE ARE USED, TESTED, WORKING, N.E.A.T. BRAND VERTICAL POSITIONERS WITH ORIENTAL MOTOR BRAND, 5 PHASE VEXTA STEPPING MOTORS MODEL PK569BUA. THE PLATFORMS ARE 7.875" X 7.875" WITH A THICKNESS OF 2.875" WHEN FULLY LOWERED AND AN APPROX.

THESE ARE USED, TESTED, WORKING, N.E.A.T. BRAND VERTICAL POSITIONERS WITH ORIENTAL MOTOR BRAND, 5 PHASE VEXTA STEPPING MOTORS MODEL PK569BUA. THE PLATFORMS ARE 7.875" X 7.875" WITH A THICKNESS OF 2.875" WHEN FULLY LOWERED AND AN APPROX.

THIS IS A USED NEWPORT MODEL 460 PD LINEAR POSITIONER WITH A HEX KEY ADJUSTMENT. IT HAS A 1.5" X 2.375" PLATFORM AND IS ATTACHED TO A (REMOVABLE) 5.75" X 4" X .25" PLATFORM. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END TO ARRANGE PAYMENT AND SHIPPING.

THIS IS A USED NEWPORT MODEL 460-X LINEAR POSITIONER WITH A .5" MITUTOYO MIC. IT HAS A (POSIBLE) TRAVEL OF APPROX. 1.0", 2.375" X 1.5" PLATFORM AND A FOOTPRINT OF APPROX.2.375" X 2.375".

THIS IS A USED KYOWA OPTICAL, RYKOSHA TECHNISCOPE TES-2 MICROSCOPE WITH A MITSUBISHI RAYON ELI-1005 FIBER LIGHT ILLUMINATOR AND A ROLL ABOUT BENCH (WITH LOCKING CASTERS) WHICH MEASURES 35.375" WIDE BY 24.5" DEEP X 30 " HIGH. EVERYTHING IN THIS SET SEEMS TO FUNCTION EXCELLENTLY HOWEVER THE OPTICS ARE UN-TESTED. THIS UNIT IS ALREADY PACKED AND READY TO SHIP.

Kiwi 1016A Table-Top Flexo Printer Box Carton Chipboard Card 100 pieces/min NICE

Hannan Packaging equipment set for Thermoform blisterpack 18" x 24" , with Hannan die cutting machine and 5 dies. Both machines are in good working condition and are currently wired up and can be cycled. Dies included are...4.5" x 17.5"9" x 12"4.5" x 8.75"4" x 11.5"

This item is new and never connected or used. Here's the info I have taken from the manuals; Manual: General Description: The SC Carousel Dehumidifying Dryer produces hot, low-dew point air that removes moisture from hygroscopic plastics. The dryer pulls warm, moist air from a drying hopper and pumps it through dehumidifying desiccant.

Office: 830-775-2580 Our Asset #:RK5041 / 007 Qty available:1 POLYMER SYSTEMS 88AE AUGER FEEDER GRANULATOR (no blades) GRIND 175lbs PHR Gallery Photo

NEWBURY 30-TON VERTICAL SHUTTLE PLASTIC INJECTION MOLDING MACHINE, MODEL V4-30ARS, 4 OZ (113 GRAMS), 1983, 8" x 10" (203 MM x 254 MM) PLATENS, 14.75" (375 MM) MAX. DAYLIGHT, DIM: 7'L x 5'W x 6.5'H, WEIGHT: 5,000 LBS.

FOR SALE! HULL 50 TON 4 POST ENCAPSULATION AND MOLDING TRANSFER PRESS WITH HEATED PLATTENS (OC146) HERE ARE SOME SPECS FROM WEBSITE FOR REFERENCE ONLY! PLEASE CALL JIM FOR MORE INFO 7146121480 USED 50 TON HULL TRANSFER MOLDING PRESS With 10 ton top transfer Hydraulic 4 post upstroke type Floor standing Distance between 2.25" dia.

Mold Size: 64.8 x 49.5 x 31.8 cm Mold Weight: 2.000 Lbs Cycles: 25 Sec Cavities: 1 Product Size: 47.2 x 27.3 x 2.5 cm Product Weight: 427 g Machine Required: 375 Ton

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!