3hp blower for sale, brand-new and used.

C1 WIRE CHOPPING LINE / COPPER SEPARATOR WITH 25hp GRANULATOR Made in the USA! This wire chopping system will enable you to separate different density materials such as copper / plastic, aluminum / plastic, aluminum / copper and much more. It will separate up to 800lbs/hr with a 40hp granulator or up 500lbs/hr with the 25hp granulator included in this package.

See it running here at youtube: http://www.youtube.com/watch?v=lS0pLR0stvQ&feature=g-upl more pics at this link at http://www.pleasantstmachinery.com/ (OR EMAIL FOR MORE PICS) like these here , or call (815)758-6534. We are open to offers on this Timesaver 337 6 head rotary denibbing sander. Shop was using it without the vacuum blower and had it hooked into their dust collection system, parts as small as 4x6 were held down to the bed.

This Wire Chopping Machine System has been very lightly used for about 6 months; everything works great without any issue. Copper Separator system with 40hp granulator (MADE IN THE USA) This system will enable you to separate different density materials such as (copper / plastic), (aluminum / plastic), (aluminum / copper) and much more. The system comes with a 10hp blower to air-convey the copper chops from the 40hp granulator to the separation table.

Great running 50hp Granulator with 3hp blower and cyclone. Blades have just been sharpened. Can be seen under power.

Used 2.5" Welex Extruder Model 200. 24/1 AC, 20 hp Reliance DC motor & 1/3HP blower, belt driven to gearbox, 10:1 gearbox ratio, non-vented, air-cooled, 24:1 L/D ratio, 4 barrel heat zones, 1 adaptor zone, 43" centerline height solid state plug in type instruments, 230 volt, water cooled feed throat, unitized control panel. Approximate Dimensions and Weight: 92” L x 36” W x 82” H 4,200 LBS.